Question? Why has no one made a dripping atty e-pipe??????

Discussion in 'APV Discussion' started by izdalion, Dec 19, 2012.

Thread Status:
Not open for further replies.
Image has been removed.
URL has been removed.
Email address has been removed.
Media has been removed.
  1. izdalion

    izdalion Ultra Member Verified Member ECF Veteran

    Joined:
    Oct 4, 2011
    Location:
    Rhode Island
    As the above post said WHY?
    It makes total sense and is a perfect complement to a pipe as you can get. Dripping into a pipe would simulate packing it to a "T" while also being able to rebuild on top of it AWESOME. Personally I think it would be great and authentic .

    I am not a mod maker so please don't say "Then why don't you make one?" LOL
    Also................. If by any chance a mod maker would like to design one of these kind of e-pipes I have a few idea's to throw around :) And I expect first dibs as well hahahahaha

    Any thoughts????
     
  2. Kemosabe

    Kemosabe Vaping Master ECF Veteran

    Joined:
    Sep 21, 2011
    Location:
    Roe Dylin
    hey whats up fellow rhode islander :)

    i think most epipes could be used with a dripping atty, however youd be dripping into the stem rather than the bowl area. the bowl area is where the battery is. if the mod had the batt where the stem is, the stem would be much fatter and maybe not look like a pipe.

    the design is still possible however. i know tha tthe modders here are very inventive and could definitely pull it off. i think its a great idea. ive always wanted an epipe and this design sounds much cooler than the ones currently on the market.
     
  3. tc1

    tc1 Ultra Member Verified Member ECF Veteran

    Joined:
    Oct 26, 2011
    Location:
    Ohio
    The problem with using the bowl as the atomizer and the stem as the battery holder would be airflow. In order for this to work you would have to inhale air which has passed the battery. If that battery would suddenly start venting as you're taking a draw ... you suddenly find yourself inhaling potential toxic chemicals.

    You can use drip attys on existing pipe mods though ...
     
  4. Johnnie Price

    Johnnie Price Ultra Member Verified Member ECF Veteran

    Joined:
    Nov 18, 2012
    Location:
    Waldorf, MD
    You could always run a tube under the battery. But then you're dealing with a very thick stem, muted flavor and weak throat hit.
     
  5. daddytwigs

    daddytwigs Super Member Verified Member ECF Veteran

    Joined:
    Oct 5, 2012
    Location:
    New Hampshire
    Why don't you make one? Oh, nevermind
    Maybe the folks at epipemods would be interested. It sounds peretty coll

    www. epipemods. com there's a contact link at the bottom of the page

    Good luck
     
  6. izdalion

    izdalion Ultra Member Verified Member ECF Veteran

    Joined:
    Oct 4, 2011
    Location:
    Rhode Island
    Hey there Kemosabe and fellow Rhode Islander :) I love the avatar LOL The Cos is awesome :p
    See you get exactly what I'm talking about :) Your right on all points and yes it would be a fatter stem. I'll tell ya the truth I didn't think anyone would grasp this concept that fast lol You proved me totally wrong :vapor:

    Here's what I was thinking:
    a 510 adapter in the "bowl" section of the pipe with a removable Phoenix type RBA and/or IGLO RBA setup for easy rebuilding.
    The shaft (lol) being the battery compartment and also the mouth piece (somehow) I haven't figured that out yet......
    A side mounted button or a spring loaded connection (The RBA 510 connection) that activates by pushing it down just like using your finger on a old style tobacco pipe. I would prefer the push down :)

    That I think would be pretty boss to say so my self lol
     
  7. izdalion

    izdalion Ultra Member Verified Member ECF Veteran

    Joined:
    Oct 4, 2011
    Location:
    Rhode Island
    Really great point!!!!! But I'm sure with enough thought and planning that could be worked around.
     
  8. daddytwigs

    daddytwigs Super Member Verified Member ECF Veteran

    Joined:
    Oct 5, 2012
    Location:
    New Hampshire
    What if the battery were at the base of the bowl instead of the stem. Maybe a16340 would not be so cumbersome.
    Or you could just build one
     
  9. izdalion

    izdalion Ultra Member Verified Member ECF Veteran

    Joined:
    Oct 4, 2011
    Location:
    Rhode Island
    I would but then I wouldn't be able to afford it lol JKin'
    I should try though even though it just popped into my head I'm sure I could revise it a little more :)
     
  10. izdalion

    izdalion Ultra Member Verified Member ECF Veteran

    Joined:
    Oct 4, 2011
    Location:
    Rhode Island
    LOL Building it would be awesome but.............. not a mod builder hahahahaaaaa
     
  11. daddytwigs

    daddytwigs Super Member Verified Member ECF Veteran

    Joined:
    Oct 5, 2012
    Location:
    New Hampshire
    Yeah me neither. Anytime I build something, I end up with more wood glue or epoxy than the base material. And a big pile of "spare" parts.:confused:
     
  12. izdalion

    izdalion Ultra Member Verified Member ECF Veteran

    Joined:
    Oct 4, 2011
    Location:
    Rhode Island
    I'm glad to hear I'm not the only one :D
     
  13. Jerms

    Jerms Vaping Master ECF Veteran

    Joined:
    Jan 1, 2011
    Location:
    Fargo
    I really want any type of e-pipe, and will get one some day. Ideally, it would be as been described, using a dripping atty that somehow would be dripped into the bowl part, that would be so awesome. I'll settle for one that you drip into the stem, but I'll have to wait until they become available at a cheaper price. Unless the money tree I planted starts flowering, it's not in my funds yet to pay a lot for a nice e-pipe. That fact really upsets my Devil Dog and Blue Grass Burley, who both mock me for using them on an ego twist.

    Sent from my LGL55C using Tapatalk 2
     
  14. tc1

    tc1 Ultra Member Verified Member ECF Veteran

    Joined:
    Oct 26, 2011
    Location:
    Ohio
    Yeah ... those are pretty much the huge obstacles. The longer the vapor travels ... the cooler the vapor, the less throat hit and flavor. In fact, along with potentially inhaling toxic chemicals ... the vapor would also start causing corrosion of the battery components.

    So your only option WOULD be to use some kind of tube, which causes the issues already noted.
     
  15. Johnnie Price

    Johnnie Price Ultra Member Verified Member ECF Veteran

    Joined:
    Nov 18, 2012
    Location:
    Waldorf, MD
    You could always grab a Kuwako for your eGo. Then it would somewhat look like a pipe.

    I could see a corn cob mod putting a battery under the bowl with the top being the atty connected to the stem. But it'd probably all have to be custom made, and maybe even be one piece with a removable head.
     
  16. Johnnie Price

    Johnnie Price Ultra Member Verified Member ECF Veteran

    Joined:
    Nov 18, 2012
    Location:
    Waldorf, MD
    Not to mention you'd have to find a battery small enough to fit under the bowl without loosing the overall look.
     
  17. izdalion

    izdalion Ultra Member Verified Member ECF Veteran

    Joined:
    Oct 4, 2011
    Location:
    Rhode Island
    I'm racking my brain on trying to make sense of these issues right now and at the moment womp wahhhh lol
    The only way I could realistically come up with a viable solution is if I visually see a pipe. I don't have one though :(
    I'm sure someone smarter then me can put 2 and 2 together.

    Issues:
    Battery & safety
    push down atty to mouth piece flow with no restriction and/or suction loss
     
  18. tc1

    tc1 Ultra Member Verified Member ECF Veteran

    Joined:
    Oct 26, 2011
    Location:
    Ohio
    I actually have a design in my head that would look pretty decent. Basically a compartment that's under the stem and looks like it's part of the bowl that holds the battery. Sort of how a guitar neck gets thicker on the bottom of an acoustic guitar.
     
  19. milo hobo

    milo hobo Super Member Verified Member ECF Veteran

    Joined:
    Jul 16, 2011
    Location:
    Lake Charles La
    An idea to get the atomizer closer to the mouthpiece would be to put the atomizer closer to the mouthpiece and put a "bottom" feeding tube from the bowl to the atomizer. You would put the pump for the feeding tube in the bowl adjacent to/on top of the battery. It might not hold much liquid, but I'm sure greater minds than mine could figure something like that out.
     
  20. Absintheur

    Absintheur Ultra Member Verified Member ECF Veteran

    Supporting member
    Joined:
    Jan 7, 2012
    Location:
    north central Indiana
    I have a couple e-pipes and I have a couple rebuildable attys...I cannot envision how you could place the atty in the bowl. The attys do not work upside down and your opening for the vapor above the coil. So you would have to drip, put on a airtight cap, fire the atty drawing the vapor out the top, down the inside of the bowl, through a tube past the battery to the stem. Would take some mighty lungs.

    My best thought would be a Bavarian style pipe with a long bowl and you could us the lower stem to hold the battery.

    [​IMG]
     
Thread Status:
Not open for further replies.

Share This Page