The eVic easy head

Discussion in 'eVic' started by pichicho, Apr 25, 2013.

Thread Status:
Not open for further replies.
  1. pichicho

    pichicho Full Member

    today launched the new The eVic easy head

    As the spare part of eVic, eVic easy head is designed
    with the concept of simple structure and firm sealing,
    which is simple and generous, but delicate.

    It's also cost effective. People will never spend much
    expenses to buy a control head, that's to say, you can
    only spend less money to buy a same multi-functioned product.

    Features:

    * Economical spare part of the eVic
    * Accurate power display
    Constant voltage output & variable voltage output
    Short circuit protection
    Discharge and overcharge protection
    Low voltage protection
    Vaporing while charging
    * Solid structure
    * Easy to operate

    ech02.jpg
     
  2. Destro

    Destro Senior Member Verified Member ECF Veteran

    Still don't entirely understand what this does from the description, at first I thought it was a housing for the og head to protect against drops..now im thinking its a economical version of the controller head? Don't see how you'd be able to dial volts or watts up and down, but i am def interested!
     
  3. Destro

    Destro Senior Member Verified Member ECF Veteran

    ImageUploadedByTapatalk 21366876020.799854.jpg

    Ooooooh i get it now...its like a ego-t mod but wayyy sexier (those v1 ego-t mods control heads looked like light bulbs!) nice post, i might be in for one of these!
     
  4. KraKsX

    KraKsX Moved On Verified Member

    I'm guessing you get the computer functions. But not user control as needed.
    It's a set it, and forget it head
     
  5. Big Screen D

    Big Screen D Ultra Member Verified Member ECF Veteran

    While I personally have zero interest in this head, it is just another example of the flexibility that the modular design brings to the table.
     
  6. Brokil

    Brokil Senior Member Verified Member ECF Veteran

    I would tend to concur with that. At least from the view they show, there really isn't much to show as far as changing anything. If it has to be controlled via software, I'm not really sure it would be worth the time or money to get. The whole point of having this is to adjust on the fly, not per-say go "oh I don't like this current Voltage/Watts, let me bust out my laptop quick and adjust it." Just not practical.

    If it has something to adjust that they are not showing, it would be a nice alternative but I like my little display.
     
  7. crxess

    crxess ECF Guru Verified Member ECF Veteran

    Hammer, Chisel, Large Rock -
    Don't worry, I'll have a new wheel on this cart in a few days!:D

    Looks like a step in the wrong direction to me.:glare:
     
  8. Destro

    Destro Senior Member Verified Member ECF Veteran

    I agree, I still don't understand, how to change voltage-unless maybe it is done through a series of button clicks?
     
  9. Serial70

    Serial70 Full Member Verified Member

    This, much like the VapeOnly BCC, is a product of Joyetech's other brandings. Check out Shenzhen iSmoka Electronics Co., Ltd, it's the same as the controller for their soon to be released product line. I'd bet that, much like the VapeOnly BCC, it is being released early to sort of "field test" it to get the bugs out before the official iSmoka line releases.
     
  10. Susaz

    Susaz Ultra Member ECF Veteran

    To me it's just a regulated mod just like the 18650 mod. If you use very low ohm things it might be useful, otherwise it doesn't look like a real VV. If you want an 18650 mod get a Joyetech head, it's easier.
     
  11. pichicho

    pichicho Full Member

  12. mphsjeep

    mphsjeep Super Member Verified Member ECF Veteran

    I tell ya what.............since i'm currently looking at totally dead and useless fried eVic......this may be a option vs. dishing out another $70+ on a maybe............
     
  13. TrainingDummy

    TrainingDummy Senior Member ECF Veteran

    They should have made the original control head like that but with the display. The flat top is just sexy as hell.

    If that head went up to 6v it could be a nice option.

    You could get a couple of these heads and the spare tube kits on the cheap and dial them in to different carts, clearos, RBAs and keep them on there all the time. You wouldn't need to worry about changing v/w and whatnot.
     
  14. mphsjeep

    mphsjeep Super Member Verified Member ECF Veteran

    Anyone selling them yet?
     
  15. TrainingDummy

    TrainingDummy Senior Member ECF Veteran

    I haven't seen them, I went to the joyetech site last night and saw they're selling the flat top caps by themselves now. Only in the chrome, black, and white though. $6 price tag too.
     
  16. zipflint

    zipflint Ultra Member Verified Member ECF Veteran

    Unless I'm just blind or stupid...you can't buy the flat top cap directly from
    Joyetech on the website....right?
    :oops:
     
  17. mphsjeep

    mphsjeep Super Member Verified Member ECF Veteran

    That is their trick........can only buy from a distributor.
     
  18. heateris

    heateris Super Member Verified Member ECF Veteran

    i wonder if it will screw on / work with my eGo-t 18650 mod tube?
     
  19. ThinkGeoffrey

    ThinkGeoffrey Senior Member Verified Member ECF Veteran

    Yes it will I use my eVic head in a ego-T mod tube more color choices.
     
  20. olgc2977

    olgc2977 Full Member

    You have to wait for a distributer or ovale to have it in stock, I wish you could buy right off joyetech but it's not a huge complaint.
     
: ovale, baker, evic
Thread Status:
Not open for further replies.

Share This Page