Media added by Bill's Magic Vapor

Semovar in 18500 mode (I think). Anyway, the kit comes with all three tubes and the hybrid connection. All we need is the mechanical pieces. Love it!

Semovar in 18500 mode (I think). Anyway, the kit comes with all three tubes and the hybrid connection. All we need is the mechanical pieces. Love it!

View
Semovar on side showing logo (barely).

Semovar on side showing logo (barely).

View
The Semovar in 189350 Mode sporting an IBTanked Carto Tank. Looks like they were made for one another, right?

The Semovar in 189350 Mode sporting an IBTanked Carto Tank. Looks like they were made for one another, right?

View
Here's the Semovar in 18350 mode. This is my stealth mode and I may take it out.....maybe not.

Here's the Semovar in 18350 mode. This is my stealth mode and I may take it out.....maybe not.

View
Semovar (left) in 18350 mode next to my Provari Mini, and Provari in Tatroe 18650 mode. All sport a Phiniac Tank: Leo Lion, Dragon, Poker.

Semovar (left) in 18350 mode next to my Provari Mini, and Provari in Tatroe 18650 mode. All sport a Phiniac Tank: Leo Lion, Dragon, Poker.

View
Upside down, showing the 510 connection and the eliqued fill screw. Remove the screw and use a needle nose bottle or Ucan. Like the Kayfun 3.0, and does not require the plastic fill needle as does the Kayfun 3.1.

Upside down, showing the 510 connection and the eliqued fill screw. Remove the screw and use a needle nose bottle or Ucan. Like the Kayfun 3.0, and does not require the plastic fill needle as does the Kayfun 3.1.

View
The is the finished Kayfun. Chose all metal this day, on my second 2.0 Ohm coil build, as I was having a bit of leaking with the clear tank tube. The metal has not leaked. What a tank! Sitting atop the Siam Mods Tank Holder.

The is the finished Kayfun. Chose all metal this day, on my second 2.0 Ohm coil build, as I was having a bit of leaking with the clear tank tube. The metal has not leaked. What a tank! Sitting atop the Siam Mods Tank Holder.

View
Threw the Kayfun on the Kir Fanis eVic to hopefully show the 2 Ohm resistance, using 7 Watts. Great first build and vapes nice. Without air control like it's big brother the 3.1, I found the draw a little too airy and wish I had bought the Russian 91% which is identical but has the air flow control and half the cost. Marvelous piece of engineering and great vape.

Threw the Kayfun on the Kir Fanis eVic to hopefully show the 2 Ohm resistance, using 7 Watts. Great first build and vapes nice. Without air control like it's big brother the 3.1, I found the draw a little too airy and wish I had bought the Russian 91% which is identical but has the air flow control and half the cost. Marvelous piece of engineering and great vape.

View
Checking the coil on the Ohm Meter. Shows 1.6 Ohms exactly. I wanted a 2.0 Ohm coil, and rebuilt the coil using a 3/4 wrap and got exactly 2.0 Ohms.

Checking the coil on the Ohm Meter. Shows 1.6 Ohms exactly. I wanted a 2.0 Ohm coil, and rebuilt the coil using a 3/4 wrap and got exactly 2.0 Ohms.

View
The remaining tubes are added, this day all metal, and then the top and mouth piece (drip tip) are added. The Kayfun is ready for juice now.

The remaining tubes are added, this day all metal, and then the top and mouth piece (drip tip) are added. The Kayfun is ready for juice now.

View
the top of the chimney is added, as is the first tank ring.

the top of the chimney is added, as is the first tank ring.

View
At this point, I added some eliquid. It allowed me to push the wicks down into the chimney tube, but not "stuffed," which could block juice flow. Also, remember to keep the coil above the air flow chamber.

At this point, I added some eliquid. It allowed me to push the wicks down into the chimney tube, but not "stuffed," which could block juice flow. Also, remember to keep the coil above the air flow chamber.

View
The wicks are then trimmed.

The wicks are then trimmed.

View
The long ekowool 3mm wicks fed up the chimney.

The long ekowool 3mm wicks fed up the chimney.

View
First coil. This is a 3/2 wrap with 32 Kanthal. The base sits in a Siam Mods base holder. Notice the wick sits above the airhole. The leads are easily connected with the two screws.

First coil. This is a 3/2 wrap with 32 Kanthal. The base sits in a Siam Mods base holder. Notice the wick sits above the airhole. The leads are easily connected with the two screws.

View
Provari with Phiniac Carto Tank, Titanium Caps - My Main ADV.

Provari with Phiniac Carto Tank, Titanium Caps - My Main ADV.

View
Juices Steep in a Beaker for First 24 Hours, then go to Amber Bottles for steeping, minimum 2 days for one flavor mixes and 5 days for multi-flavor mixes. Complex recipes can take 2 - 3 weeks of steeping to bring out the more delicate/subtle flavors.

Juices Steep in a Beaker for First 24 Hours, then go to Amber Bottles for steeping, minimum 2 days for one flavor mixes and 5 days for multi-flavor mixes. Complex recipes can take 2 - 3 weeks of steeping to bring out the more delicate/subtle flavors.

View
Amber Bottles and Careful DIY Records Labels. Exact recipe/formulas are kept on the laptop with the DIY Calculator. Include name, % flavoring, mg strength, PG/VG ratio, Volume (ml) and Born Date.

Amber Bottles and Careful DIY Records Labels. Exact recipe/formulas are kept on the laptop with the DIY Calculator. Include name, % flavoring, mg strength, PG/VG ratio, Volume (ml) and Born Date.

View
ArtBin Cases for DIY and Gear, kept in the pantry and out of sight.

ArtBin Cases for DIY and Gear, kept in the pantry and out of sight.

View
Vaping Corner/Nirvana Central, where most of my VapeQuest takes place. Fortunately, the wife vapes, too, so I can get away with a corner of the counter top and the cabinet above.

Vaping Corner/Nirvana Central, where most of my VapeQuest takes place. Fortunately, the wife vapes, too, so I can get away with a corner of the counter top and the cabinet above.

View
Kir Fanis Stainless Telescroping Evic Tube with RSST in 18350 Mode.

Kir Fanis Stainless Telescroping Evic Tube with RSST in 18350 Mode.

View
Kir Fanis Stainless Telescoping Evic Tube with IGO L in 18350 Mode.

Kir Fanis Stainless Telescoping Evic Tube with IGO L in 18350 Mode.

View
Kir Fanis Telescoping Stainless Tube Evic with Ithaka Clone in 18650 Mode.

Kir Fanis Telescoping Stainless Tube Evic with Ithaka Clone in 18650 Mode.

View
Kir Fanis Telescoping Stainless Tube Evic with Kayfun Lite in 18650 Mode.

Kir Fanis Telescoping Stainless Tube Evic with Kayfun Lite in 18650 Mode.

View
Top Bottom
Forums
Products
Vaping.com
Star Suppliers
Blogs
Menu