Search results
-
The VAMO with single 18350
Hey apuck - so did cycling the batteries make any difference in your battery life? I have noticed the same thing with my Efest 800mah flat-tops. When they are stacked, I get good battery life, but when I run my Vamo in single 18350 mode, I get maybe 2 hours of vaping in before the battery... -
VAMO OHM Error FIX!
Yes, that's exactly what you need. I stole mine from a 510 connector I had laying around here. I didn't know they sold just the insulator separate. You won't have to solder anything to install that - just slide it over the positive post. It's a bit tedious, but can be done with a little... -
VAMO OHM Error FIX!
I'm guessing you did the o-ring fix rather than stealing the actual piece you need from somewhere else? If you have almost anything laying around with a 510 connection on it that you don't mind popping the center pin out of, you'll see that the "washer" is actually just the top part of a piece... -
VAMO OHM Error FIX!
I'm guessing you did the o-ring fix rather than stealing the actual piece you need from somewhere else? If you have almost anything laying around with a 510 connection on it that you don't mind popping the center pin out of, you'll see that the "washer" is actually just the top part of a piece... -
Voltage, Amps, Watts, Etc...
I recently got into RBAs, and up until tonight, I have used them exclusively with my VV devices (Vamo and Zmax). I have been reading a lot about sub-ohm coils, and how great the vape quality is. I just finished up a successful .82 ohm coil in my new AGA-S. It's a 5/6 wrap using 28 guage...- Chakthi
- Thread
- amps loss ohms resistance vamo voltage volts
- Replies: 16
- Forum: Rebuildable Atomizer Systems
-
Vamo HELP!!!!
If you do choose to use unprotected batteries, you might consider at least investing in the Vape Safe, Vape Safe 2, Short Stop, or some other safety fuse. I use the Vape Safe 2 in my Vamo with zero problems, and it gives me a little bit of peace of mind - kinda like putting my seatbelt on... -
VAMO OHM Error FIX!
I tried the washer fix, but it wouldn't work for me because there is actually a rubber piece attached to the washer that holds the center pin where it should be in the connector, and that part actually got pushed down into the Vamo in my case. No harm really as it is rubber, but I got to... -
On An aCLEAR Day We Can See a Nova? Good Solid Vivi Nova Clone Available Now - aCLEAR Variable 3.5ml Tank Clearo Kit Available Now w/ Heads
The drip tip definitely does come off. I thought it was something I was stuck with when I first got mine as well. It was almost like the o-ring had welded itself to the top cap! It ripped it up a bit when I finally got it free, but it's still usable. I don't even use my aClear anymore... -
New to the forums, AGA resistance question.
LOL - SoundlessHero's answer... I get the idea of what he is saying, but it was just way over my head! I think he was just stating that some fluctuation is normal, though he wasn't addressing any amount in particular. That was what I took from it anyway.- Chakthi
- Post #16
- Forum: New Members: Introduce Yourself!
-
New to the forums, AGA resistance question.
Check your negative screw Niko. I just soaked up all the liquid and it jumped to 4.3 ohms on me, so even though I was certain I tightened the negative screw down tight, I thought I'd check it again to be certain, and to my surprise, it moved just the smallest amount one could imagine, but now...- Chakthi
- Post #13
- Forum: New Members: Introduce Yourself!
-
New to the forums, AGA resistance question.
Hey Niko. Same thing here. Just got my AGA-T+ 2 days ago, but am getting the hang of building the coil. The one I'm using now started out at 1.8 ohms, and stayed within .2 ohms for the 1st half of the tank. However, it jumped massively to 3.8 ohms, and now is slowly dropping down. At...- Chakthi
- Post #12
- Forum: New Members: Introduce Yourself!
-
On An aCLEAR Day We Can See a Nova? Good Solid Vivi Nova Clone Available Now - aCLEAR Variable 3.5ml Tank Clearo Kit Available Now w/ Heads
I switched the heads out. The 2.8 reads as 2.7 on the Zmax which is close enough. So far, so good! I am running it at 8 watts, and have yet to be choked up by the nasty, burnt taste that the 2.4 was giving me. 8 watts with 2.7 ohms resistance works out to about 4.6-4.7 volts, which is within... -
On An aCLEAR Day We Can See a Nova? Good Solid Vivi Nova Clone Available Now - aCLEAR Variable 3.5ml Tank Clearo Kit Available Now w/ Heads
Yep. That's definitely the next step. The aClear came with the 2.4 ohm head installed, and included a 1.8 ohm, and a 2.8 ohm replacement head. I think I'll try the 2.8 since having enough voltage to spare is definitely not a problem atm. lol Thanks for the reply! :) Oh, btw, the drip tip is... -
Volt Indicator, Rev. 2
I recently purchased the Assembled Volt Indicator, Rev. 2 from vaporheads.net. It can be found here: Assembled Volt Indicator, Rev 2 . I purchased it because I wanted to be able to measure the voltage being delivered from my new Sigelei Zmax v2 which I also purchased there. The short version...- Chakthi
- Thread
- vamo
- Replies: 1
- Forum: E-Cigarette Accessories
-
On An aCLEAR Day We Can See a Nova? Good Solid Vivi Nova Clone Available Now - aCLEAR Variable 3.5ml Tank Clearo Kit Available Now w/ Heads
I got one from GotVapes.com, E-cigarette Supplies - Atomizers Cartomizers Mods Juice and more in the mail a few days ago, and decided to set it up today with my all-day juice. I read somewhere, maybe on the gotvapes website, that it isn't recommended to fill the aClear all the way to the 3.5ml... -
-
What to chose? :o Confused
I started vaping about a month and a half ago. I learned most of what I now know the hard way. I wish I had done more research before I bought all the equipment I have purchased. I also wish I had price-shopped, because prices vary dramatically in the vaping world. Anyway, you can get a... -
Chromed Steel Sigelei ZMAX Version 2 VV + VW + eGo Connection
Should have mine by tomorrow!! Woohoo!!!! :evil:- Chakthi
- Post #3
- Forum: E Cigarette Suppliers Forum
-
The New DS3 Multi Configurable Tank!
I got my DS3 Tank in the mail today, and so far I love it! At 4 volts, it really gives my juice awesome flavor! I hope you get replacement bottom clearomizers in for it, because if my first impressions are any indication, I'm likely to use this tank quite a bit. :) Update: Ok, it's been...- Chakthi
- Post #6
- Forum: Goodejuice
-
Shipping fees high...
Shipping is really excessive for very small orders like mine - nearly as much to ship as my purchase total. First Class should definitely be an option. If something were to happen, I understand that it is my responsibility... PLEASE reconsider for future orders...- Chakthi
- Post #3
- Forum: MyFreedomSmokes