Search results
-
TRA oxidation cleaning?
Flitz is very mildly abrasive Its worth a try Works beautiful on brass with hardly any rubbing Just wipe it on and wipe it off -
Chalice III
The last sale over sold also Some people with order numbers will probably get an email from Mark With a choice of getting a refund or waiting a couple months for more to be made Thats how I got mine last sale -
-
question about non-rba's with Reo
Cyclone is an RBA made in the Philippines by Vicious Ant Size: Standard - 14.5mm OD - Will fit a non-LP REO Air Flow Control - 18.2mm OD - Will only fit an LP REO I have 2 bottom-fed and 1 top-fed -
I'm not sure what's going on...trouble shooting
Rob posted here on 10-10-14 http://www.e-cigarette-forum.com/forum/reos-mods/612286-i-have-seen-zero-when-when-when-so.html#post14338441 He said about a two month wait -
I'm not sure what's going on...trouble shooting
Looks like the atomizer 510 pin is barely making contact with the REO 510 pin -
I'm not sure what's going on...trouble shooting
Now screw the atomizer back on and check the voltage at the positive post of the atomizer Should again be very close to full battery voltage If not, the 510 pin of the atomizer is not making good contact with the REO 510 pin -
I'm not sure what's going on...trouble shooting
+1 For taking the atomizer off and using a volt meter to see if you have full battery voltage at the REO 510 pin -
Cyclone question
Any version cap will fit The bases are the same diameter -
So... Chalice...
They turn up in the classifieds occasionally You have to be lucky and fast with money I paid well over $200 new, and was lucky to get it Good Luck -
Guys, single coil reading a higher ohm than a dual coil build???
A formula for two resistances in parallel is called Product over Sum Product / Sum 1*1 / 1+1 1 / 2 = .5 ohm OR if the resistances are the same then R / 2 1 / 2 = .5 ohm- tobarger
- Post #4
- Forum: Coil Builds
-
Question for the Coppervein owners
I've always thought the CopperVein is the sharpest looking REO available I wish Rob sold them already clear coated I would have bought one by now I think it would definitely be one of his best sellers -
Gizmo?
I was using a KKVapeTek coil jig which is pretty damn good until I got the Gizmo My coils with the Gizmo turn out perfect tight coils without torching or squeezing and with very predictable resistance Definitely an improvement Just like superX says FORGET HEATING / TORCHING / PULSING / SQUEEZING -
Deoxit Gold: You're killing me.
Whenever vapers latch onto anything the price always goes way up I bought a Deoxit Gold pen on Amazon in April for $17.45 Now its over $25 not including shipping Damn Vapers They Ruin Everything -
Opinions on the BF Cyclone rda?
I've got 3 Cyclones You can't go wrong -
Reomizer 5 post screws
m3(diameter3mm) x 0.5(thread pitch.5mm) x 6(length6mm) -
REO Grand feeding tube fell off?
If your putting a tube on, it has to be clean, no e-juice on/in the tube or on the nipple. Slide tube half way onto the nipple and apply a drop of super glue then slide the tube fully onto nipple. It also helps if you cut the end off the tube, the end could be stretched. -
Helllllp!
Looks authentic to me 2013 concave deck, didn't have "2013" on bottom like the 2014 All three of my Cyclones have the slotted pin just barely below the end of the threaded 510 I just checked them on both my metal REOs and they all make good connection One of them had to be worked back and...