Search results

  1. tobarger

    1st ever coil build :)

    temco_industrial_power in Business & Industrial > Electrical & Test Equipment| eBay I often find that TemCo eBay with the free shipping has the lowest price for resistance wire I just ordered some 29 AWG Kanthal from them 100 Ft for $7.60 shipped
  2. tobarger

    RDA's - Loose Screws and Broken Leads....Help!!

    UncleChuck knows his stuff Make sure there are no sharp edges on the ends of the screws Sand them off if necessary Sharp edges will definitely cut into the wire and cause a break You want the screws to compress the wire slightly but not cut into it I'm going to check my screws right now
  3. tobarger

    KFL+ Screws Popping the Kanthal Out

    Thats the coil jig I use Best one I've seen Those nylon thumb screws are really the only way to go I had problems with the threaded building platform hole in the aluminum body The aluminum is just way too soft Before I totally stripped the threads I screwed a shorty 510 extension into the...
  4. tobarger

    Ohms changing when adding liquid, am I doing something wrong?

    1.5 to .6 Ohm Thats is a big drop I would say the coil is somehow shorting to ground big time Adding liquid might change the resistance ~.1 Ohm Thats been my experience
  5. tobarger

    After building tons of coils I have settled on one.

    OK But I'm not wearing a hat that looks like cheese
  6. tobarger

    Organic Cotton - Wallgreens

    All of the organic cotton I've seen is whitened with Hydrogen Peroxide I don't boil my organic cotton or anything else If it needs to be boiled, I don't use it
  7. tobarger

    cotton... like finally......success!

    Peaches & Cream white 100% cotton yarn from Walmart Alot of people don't even boil it, same with organic cotton balls I've got a lifetime supply of both Its good to be old
  8. tobarger

    Cotton users: How often do you change your diaper?

    Theres nothing like a fresh wick and clean coil And an ice cold can of pop
  9. tobarger

    Note regarding fluid vaper

    No Problem
  10. tobarger

    Cotton users: How often do you change your diaper?

    Have to change cotton and clean the coil about once a day I've been dripping dark Halo juice that gunks the coil in a little less than a day But it is tasty, especially when the wick and coil are clean
  11. tobarger

    anyone tried the Chalice bottom feeder?

    My Chalice will be here today 3 days from Romania shipped UPS Way to go Mark
  12. tobarger

    Unmarked coils measured (Ohms) with new multimeter

    You do need to subtract the test lead resistance from the measured resistance with this meter Try holding the test probes tightly together and note the displayed resistance Do not hold the ends together with your fingers because this will put some finger resistance into the measurement My meters...
  13. tobarger

    Cotton or Silica?

    I can not get that calculator to work at all It just doesn't even update when I change the wire material or metric to imperial units Looks interesting though Bookmarked it any way, hopefully it will work for me in the future Using Windows XP with Internet Explorer 8
  14. tobarger

    Atomic RDA

    Original Atomic RDA on sale at The Vape Theory (California) They don't sell clones $81.50 Shipped 2 day Priority Got mine today, Its Beautiful I'm sure its very nice
  15. tobarger

    Where can I find various sized O-Rings?

    Thats the problem, its hard to figure out what size you need. Theres also Metric and Inch sizes to further confuse the issue. The easiest way is to take the atomizer to a good hardware store.
  16. tobarger

    Where can I find various sized O-Rings?

    Do a search on Amazon for "O-ring assortment"
  17. tobarger

    Where can I find various sized O-Rings?

    They are the same. Usually the o-ring specs are given as: Inner diameter X Cross section (thickness) 1mm X 16mm must be a typo since an o-ring with an ID of 1mm and a CS of 16mm is impossible
  18. tobarger

    Does anyone know where or what I can do to grind off some of the ss on an atty or mod?

    Carefully using the side of the grinding wheel on a bench grinder
  19. tobarger

    Coil building station

    Here is the Coil Jig I use (I'm Sure Its "Very Nice") Has three posts: 1/16 - 0.0625(in) - 1.5875mm 3/32 - 0.0938(in) - 2.3813mm 1/8 - 0.1250(in) - 3.1750mm The two plastic thumb screws really make this coil jig a joy to use Haven't seen this feature on any of the other jigs...
  20. tobarger

    Coil building station

    I put one elastic hair band over the wire on all my wire spools (its a keeper) It is adjustable and keeps the whole spool from uncoiling (total PITA) Tie a small loop knot in the band before putting it on the spool (makes it easy to grab and adjust)
Top Bottom
Forums
Products
Vaping.com
Star Suppliers
Blogs
Menu