Search results

  1. L

    SM V3 Semovar VS Provari

    Intaste does not have the button top Panasonic 3400mah batteries, even though you can clearly see one in the photo. I've also heard that any button top with protection will not fit a Provari. Ideally I want batteries that I can interchange between the Provari and SM. I guess I'll have to get...
  2. L

    SM V3 Semovar VS Provari

    Thanks, I ordered everything today and yes, it wasn't cheap lol. Regarding the batteries, here is what svoemesto sent me. Unfortunately it's in Russian, but the charts are labeled. I've also ordered some of the Sanyo batteries that he's recommended. I'm not sure what to believe when it...
  3. L

    SM V3 Semovar VS Provari

    Thanks guys. I'm going to try it out now.
  4. L

    SM V3 Semovar VS Provari

    Can someone just confirm for me the parts that I would need to order to build that mod in the picture? Is it just a SM V3 base kit + sticker? Thanks
  5. L

    SM V3 Semovar VS Provari

    Yes sir, that looks like the one I had in mind :) I see you've got the 3400mah Panasonic batteries there from intaste, I'm assuming? Could you link me up to a place where I could find that mod? Thank you!
  6. L

    SM V3 Semovar VS Provari

    I'm thinking about grabbing one of these but I wanted one that was side by side and could handle 18650's. Does anyone know if they even exist? I have 2 provari's currently with 2 KFL's (one is a plus) and love them, but I just want a new toy :)
  7. L

    Kayfun LITE

    Hi Donnah - can just clarify which device you were referring to the 16g not fitting in the fill hole (Zap or KFL)? Thanks again
  8. L

    Kayfun LITE

    Thanks guys. I was just guessing on the size btw. It must be 18g since it came with the zap. I don't think it's that big of hassle to suck up juice and I use 50/50. I've also used the syringe tip to wrap wire around to create low resistance micro coils. Having that little plastic base at...
  9. L

    Kayfun LITE

    Hey guys. It's been a while since I've posted here but am happy to report that all is well in Kay Fun Land. Running my original KFL and the Plus exclusively now on 30g wire and cotton. Even though I recoil once a month, I think these things could live on much longer. Anyway, I've been using...
  10. L

    Kayfun LITE

    I just ordered my second KFL and am happy to see that I will be getting a Plus this time around. I've gone back to using my syringe tip and making lower ohm micro coils but sticking with cotton. It's a pain to have to change the wick out every other day but there's no going back for me now...
  11. L

    Kayfun LITE

    Thanks Dusty, I still love the thing, but I don't love having to carry around all these extras if I didn't have enough time to vape it enough to expose any issues. I can definitely see that I will get better building the wicks so I won't have to rebuild them. However the thing is that I...
  12. L

    Kayfun LITE

    Guys, I know that I might get flamed for saying this, but my KFL is starting to become a PITA. Everything's gotta be perfect for it to work. When it is, there's nothing better. However if you don't cut your wicks perfectly, you need to drain it and start over. If you don't change your cotton...
  13. L

    Kayfun LITE

    Ah, ok. So you're having a similar experience. I'm vaping Rawr Caramel 50/50 24mg. I was thinking that the flavor drop off was just a because the cotton was no longer new and wears out faster than the silica. It's not really tasting burnt, but there's a hint of it there by day 2. The juice...
  14. L

    Kayfun LITE

    Hey guys, got another question, well more of an issue. I've had this happen with both cotton and silica - burnt juice. My first build was a .8ohm micro coil using 30g and silica. My next few builds had a larger diameter (all with 30g) and were 2-2.2 ohms. I vaped the .8 coil at 3.8v and have...
  15. L

    Can someone tell me what happened to the Altoids / Penguin vv mod from Smartvapes?

    Thanks for reaching out and trying to help. I didn't store it with batteries in it. It literally looked brand new and was only used for about a month. I tried everything I could, even polishing those. Luckily I was able to find and try some 1.25ohm dual coil cartomizers that it still worked...
  16. L

    Can someone tell me what happened to the Altoids / Penguin vv mod from Smartvapes?

    Well, here's what I was able to find out. I got in touch with the owner of Smartvapes.com asking what I would need to do to get mine repaired. The owner built the mods and sold them himself. I had barely used the mod since buying it as merely a backup to my Provari. When I went to use it...
  17. L

    Kayfun LITE

    That's funny, I just sold my Altoids mod. I just keep a couple spare tanks with 1.25 and 1.5ohm dual coil cartomizers and juice ready. Was using those in bed as I was afraid my KFL would leak if I rolled over on it while asleep. I've passed out with it for 2 nights in a row now and not a...
  18. L

    Kayfun LITE

    Thanks guys. Bronze, I remember you telling me that my 1.8 was perfect before so I just wanted to be sure it was safe to run with 2.2. This one might have an extra coil though...my eyesight sucks unfortunately lol. It's really kicking ... so far though.
  19. L

    Kayfun LITE

    Thanks for the reply, but just wanted to verify - 2.2ohms is just about perfect? I'm vaping at 4v currently with it. Thanks again.
  20. L

    Kayfun LITE

    So, I've gotta give even more props to VapeDivr again for this video. I finally went cotton and got it working perfectly. Don't think I'll be using Silica again. The key to this whole thing is making sure the end of your wicks don't extend down into the channels where the threads start. So...
Top Bottom
Forums
Products
Vaping.com
Star Suppliers
Blogs
Menu