mechs are more expensive vs regulated mods?
Custom/homemade/handmade items are certainly expensive compared to mass produced items; not specifically mechs vs regulated mods;
and mass produced mechs are cheap, certainly cheaper than regulated mods.
1: effort/draw
Your v2 e-cig would be the type of thing that has a tight draw.
What you want is something with wider airlow / loose draw.
2: bigger devices with wider airflow usually have a button to activate; they use much more powerfull batteries; you get used to it.
3: the only hands free...
I'm reminded of my first couple months.
Yes there is a bit of a knack to getting used to these devices; plus different devices have their own quirks.
If you are able to stay off the cigs while using cigalikes (example: disposable cigalikes) I'd suggest you start with that for a few weeks or...
I see the real issue as integration versus modularity.
If your tank is giving problems, it would be nice to be able to just pop the tank part off and proceed in dripper mode; or if your coil has a problem , just pop off the tank part and adjust your coil - you can do that with the...
Is that a topcap attached to the one on the right?
truehybrid means it's one piece; but if you have a bunch of topcaps and leave them permanently fixed to your atty's then you simulate truehybrid functionality. I bought and use a tenpack of chiyou topcaps for that purpose.
That's an example of why the description 'hybrid' is not a good description.
I do not know the threading on the Kennedy Ruby, but assuming for example that it is an m20x1 female thread, then it can be described as an m20x1 female threaded atty.
The typical atty would be a 510 threaded atty...
well it could just be to do with the coil.
with a proper rebuildable type setup you literally screw the coil legs down to make a proper connection, but with prefab coils, the coil legs are just pressed against metal between silicone/rubber/plastic insulator.
On the other hand it could also be...
Is it a prefab coil or is it a coil you wrapped?
What kind of topper are you using? a tank or an rda?
I don't think that's a temperature controlled mod.
If its an rda, tighten the screws when you are dryburning because the screws will be hot, and they tend to come loose when hot.
When you are filling out a form, and the only choice is yes or no, sometimes you just gotta leave it blank.
Things change; technology changes, and the old forms need a nudge to get with the times.
"""""
'These things shouldn't be able to just go off like that. I've been onto Trading Standards as well as the remains of the battery is now with them.'
Mr Bennett has now sought legal advice.
He said: 'It was a scary experience. I turned to ecigs two years ago to quit smoking. Since this...
I've found in life, it's better to focus on the positive, not the negative.
So better to help smokers quit with vape, than spend too much of your mind battling with misperceptions.
The proof is in the pudding, so better to spend your time making pudding than debating it.
Get a higher ohm coil; nowadays 0.5 ohms is pretty common;
use wattage/power mode.
start at lowest wattage and move up slowly.
with the existing coil, you can just start low and move up gradually;
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.