Search results

  1. foggdawg

    Fogger V2...WOW

    I followed Todd's video. Using 2mm silica doubled over and 30ga kanthal. 4 5 wrap about 1.3 ohms(so my SVD says). Been vaping all day with no problems. Heavy vaper . This was my fourth go at this. Finally got good results.:vapor:
  2. foggdawg

    Fogger V2...WOW

    I just got a shipping notice for mine from Vaporciggz . Vaporciggz has a preorder and might have some in stock by now. This is for the V2
  3. foggdawg

    Ithaka official

    Thanks guys. Poppa D, I have been running dual coils on the ithaka from day one.
  4. foggdawg

    Ithaka official

    I'm having an issue with the o ring under the top cap. It's so tight around the mouthpiece that it is very hard to turn the mouthpiece to adjust juice control. Any fixes out there for this?
  5. foggdawg

    MKB-TS Mechanical Mod (GGTS Clone)

    Double post
  6. foggdawg

    MKB-TS Mechanical Mod (GGTS Clone)

    OK, it's probably not a battery issue more than it could be a short or connection issue. If you have wrapped several coils on the herc with no problems you might wanna check the spring and the switch. Make sure the switch is tight. After a while the switch post and plunger that makes contact...
  7. foggdawg

    MKB-TS Mechanical Mod (GGTS Clone)

    Also, what batteries are you using? Efest are good and pannycgr
  8. foggdawg

    MKB-TS Mechanical Mod (GGTS Clone)

    I'd check the spring on the bottom post and screw it down more for a better connection.
  9. foggdawg

    MKB-TS Mechanical Mod (GGTS Clone)

    No issues with hot button on mkb-ts.
  10. foggdawg

    MKB-TS Mechanical Mod (GGTS Clone)

    If you have another mod, try your herc on that mod. I had the same problem once upon a time. I'm running my ithaka at .68 on the mkb. My herc is at .8 on ehpro ea mod. I can't remember what was the cause of that hot button.
  11. foggdawg

    Ithaka official

    Well my TH and wicking issues are resolved. Thanks you guys for chiming in. Just found some 2mm silica lying around and wrapped 2 coils with it. .6ohms vapor heaven. Guess I can't use ekowool for everything. Oh, I did use a strip of ekowool for the middle crosspiece..lol. Great, now everythings...
  12. foggdawg

    Ithaka official

    Yeah, I forgot to mention that. Both juice controls are open. My first builds were silica and it worked great. Thanks, a mix might work.
  13. foggdawg

    Ithaka official

    I am having trouble with what seems to be wicking issueswith the ithaka. At first it seemed to be a strong TH. But now I think it's wicking of the ekowool. I have used 1.5 and 2mm with the same bad results. I'm using the criss cross on the ceramic. I can drip some juice thru the mp to the coils...
  14. foggdawg

    Nickel Foam?!?

    Well I guess it's true....."results may vary" With so many people with different vaping styles results are sure to be mixed. I have had no problems with the foam. Even when adding the ss sleeve. Now I do see where my juice is getting darker as if im using hollow wicks but still experience good...
  15. foggdawg

    Nickel Foam?!?

    Flavor is good and since I'm a vapor guy I must say the vapor is great. Remember I'm using this on my SVD at 1.5 ohms @5v. My vape is DKTab 15% 15%nic this juice is a 60p/40v mix. It is a juice hog though. But that is indicative of the wicking. I had to check the ohms again and it's still 1.5...
  16. foggdawg

    Phoenix V5 dual coil RDA

    IMHO the V5 is one of the best low budget rda units around. I love mine but I always use it as a dual wick device on a mech. making the wick thicker by doubling or more will make the coil bigger which uses more wire which makes the ohms higher. The important thing is to not choke the wicks by...
  17. foggdawg

    Nickel Foam?!?

    I thought I'd try this again. Thought I'd wrap the foam with 500 ss mesh. So, on my AGI with the wick hole bored out to 1/8" 30ga Kanthal the wrap came to 1.5ohms...dammit! Wanted closer to 1ohm. But it gave me a chance to use my VV/VW devices that has been sitting idle for some time now. Used...
  18. foggdawg

    Sigelei Mechnical Mods

    There's a segelei #8w thread. From the comments that bottom switch is the same as the #19b. If I can take the switch apart, I can change the spring. That's what I did for my #19b. They are saying the #8w switch isn't glued like the #19b.
  19. foggdawg

    Sigelei Mechnical Mods

    I'm looking at buying the 8w. But if it has the same stiff spring on the bottom switch as the 19b I won't. Does anybody know this?
  20. foggdawg

    Nickel Foam?!?

    Would using this foam as a wick be safer if it were wrapped in a ekowool sleeve or a sheet of ss wick? It works great alone IMO. But I don't wanna poison myself.
Top Bottom
Forums
Products
Vaping.com
Star Suppliers
Blogs
Menu