Search results

  1. AnsonJames

    HCigar VT200

    djsb (the Youtube reviewer) has a bunch of settings on his website; http://www.djlsbvapes.com/dna200/ According to him, the resistance for the SS 510 version is 0,022 - I'd be inclined to go for that one as he's very well informed about these things.
  2. AnsonJames

    Reuleaux RX200

    It's cast Zinc alloy - same material as the Evic VTC. This mod in aluminum would cost a fortune.
  3. AnsonJames

    Reuleaux RX200

    The flash point for cotton is 410 Fahrenheit - if you set it to 500 Fahrenheit with dry cotton then it will burn. It burnt the cotton at a lower temp before the released firmware - with 1.07 and at 220 Celsius, it scorches it but it doesn't burn. This means TC is working acceptably for most people.
  4. AnsonJames

    Reuleaux RX200

    If you ramp up the temp beyond the flashpoint of cotton then it will. If you don't - it won't!
  5. AnsonJames

    Reuleaux RX200

    TC is working fine across the board on mine.
  6. AnsonJames

    HCigar VT200

    That the V2 battery? It's listed as being "improved" so I thought they may be truthful this time. Got my VT200 enclosure, the positive wire is pre-soldered and the 510 is the gold plated stainless version - hoping I can get all the required components to have it working by Monday at the latest.
  7. AnsonJames

    VT200 Enclosures now available.

    No, but the positive (pre installed) is long enough to have the board slightly out of the enclosure when it's soldered, they recommend a solid piece of copper wire for the ground. I intend to solder a pre shaped piece of heavy copper electrical wire to the board which I'll bridge in situ. As...
  8. AnsonJames

    VT200 Enclosures now available.

    Cigreen seem to be the only vendor with them and fortunately for me,they're in the same country. Ordered the enclosure yesterday and it arrived today, got a replacement V2 VT200 battery too.
  9. AnsonJames

    VT200 Enclosures now available.

    I think these have the potential to be the next "Hana" box for DIYers.
  10. AnsonJames

    WISMEC Reuleaux RX200 TC

    Silicone skins will be available in a couple of weeks time I believe.
  11. AnsonJames

    VT200 Enclosures now available.

    I received a VT200 enclosure this morning, unlike the Hana enclosures these are actually manufactured by HCigar so the quality is as good as what you would get on a retail VT200. It comes with a steel 510 connection which is very nicely gold plated, the positive atty wire is even pre-soldered...
  12. AnsonJames

    puzzling behavior -- anyone know?

    Umm... I think you answered your own question then.
  13. AnsonJames

    HCigar VT200

    Thanks mate, got the enclosure and battery on the way but I have to get an xt30 for the battery connection - and the board! It'll be a while before I can actually find out the true battery capacity for the settings.
  14. AnsonJames

    DNA 200 Watt

    Just wondering about the chip in that Kangside mod - no mention of Evolv and it's listed as a D-N-A 200. I like the look of this mod but I think I'll wait because there's an SXK mod which sports a DNA interface but it's not Evolv...
  15. AnsonJames

    HCigar VT200

    Does anyone know what the capacity of the "V2" battery is? I'm just wondering if Hcigar have been truthful about the 1300mah capacity in this one.
  16. AnsonJames

    puzzling behavior -- anyone know?

    Bad battery and/or quiescent current - quiescent current is something that all mods have, some more than others and unless the mod is off is a process that happens in the background so the mod will fire instantly as the button is pushed. Try charging and 5 clicking the mod off - see if it...
  17. AnsonJames

    WISMEC Reuleaux RX200 TC

    Did you check to see if the magnets are flush or if there's any excess glue? I had a similar problem on the Istick 60.
  18. AnsonJames

    HCigar VT200

    For anyone interested I've just discovered one of my local vendors here in Ireland is selling VT200 enclosures. They're complete with stainless 510 connections and all screws/buttons required, they're also legit HCigar items as opposed to being copies. I've priced everything and it comes in a...
  19. AnsonJames

    Heaven Gifts Survey: Your opinions on Wismec RX200

    He looks like he had fun making it - very funny stuff.
  20. AnsonJames

    Heaven Gifts Survey: Your opinions on Wismec RX200

    Anything more to say on the matter?
Top Bottom
Forums
Products
Vaping.com
Star Suppliers
Blogs
Menu