Search results

  1. bapgood

    The "WeekEnder"

    It should say.....$$$$ happily spent on vaping gear
  2. bapgood

    The "WeekEnder"

    There was a question of way use a lipo over the round cell 18650's Below is why and I plan verify there is that much difference. Sony 18650 US18650VTC3 30A 1600mAh - 12mOhm internal resistance LG LGDAHE21865 2500mAh 30A batts - 13mOhm internal resistance Orbtronic SX30 18650 30A 2100mAh -...
  3. bapgood

    The "WeekEnder"

    Actually its a 2S2P pack......hmmm.....might have to order one and tear it apart and see how big the cells are for a couple of 1S2P packs :D
  4. bapgood

    The "WeekEnder"

    The battery that BJ linked is a 2s pack...intended to be used with a step down dc/dc converter...it is not compatible with the DNA unless you open up the hard case and convert it to a 1S2P pack.....then you would have an 8400mah pack.
  5. bapgood

    WIP - 3x 18650 battery box from china -> DNA20 mod....hopefully

    Great info Mamu!!! Luckily I have been fortunate enough not reverse a battery on a DNA, but if memory serves from talking to Brandon....A brief hit usually takes out a component used for the battery display, so I believe the screen still works but the battery level does not. I believe extended...
  6. bapgood

    Raptor Flip-Top VV Mod with 20A, 120W dc/dc converter...

    My bad :facepalm: I just skimmed the initial post as I had seen it before :D I can only find them in China thus far....here is an ebay source that I know nothing about 2pcs LG LGDAHE21865 High Drain 2500mAh 30A 3 6V Lithium ion Li on 18650 Battery | eBay
  7. bapgood

    Raptor Flip-Top VV Mod with 20A, 120W dc/dc converter...

    What is this 30a LG 18650 you speak of??? Where to order mainly :D
  8. bapgood

    The "WeekEnder"

    I have a feeling you will really like that battery. I just got this meter from hobby king....sadly the manual wasn't linked from the US warehouse and it says 2-8s....So I will have to see if I can rig it up to work off a power supply or something....but it does have a battery internal...
  9. bapgood

    Raptor Flip-Top VV Mod with 20A, 120W dc/dc converter...

    I have my parts order (minus charger/case) hoping to be here Saturday. Kind of on the fence if I will put this in a mod, I have been wanting to build a bench a bench unit with tethered wand for testing atty setups and etc. I think this powered by a 12v power supply would work good. Thanks for...
  10. bapgood

    WIP - 3x 18650 battery box from china -> DNA20 mod....hopefully

    You should try lower mah and higher amp rated 18650's....I'm not sure what the specs are on the batteries you are using but in general the higher mah 18650's don't perform well in higher current vaping. I had 6000mah 65c lipo DNA mod and it would last around 4 days vaping a lot at lower wattage...
  11. bapgood

    The "WeekEnder"

    Here is a laugh for today....I seen this and it cracked me up.
  12. bapgood

    The "WeekEnder"

    Woot woot.....FT Taifun GS clone time. Initial out of the box thoughts.....It's better than the FT TGT clone!!! It's has supper fine knurling like the authentic TGT.....even the tank threads are good!!! The only flaws I could find were minimal, and they were a slightly loose drip tip and...
  13. bapgood

    The "WeekEnder"

    Hmmm....check it out....bad ... composite metal that is almost like working with wood. Seeing this Lead to some research and finding what I believe is the material used Welcome to M3 Composite Industries! M3 Metal Pen Blanks Turn on Wood Lathe
  14. bapgood

    Taifun GT Discusion!

    I like the 1.2mm for the most part, but pulling the 1.2mm and replacing it with a 14g needle results in ~1.5mm air hole. The FT clones are ~1.5mm
  15. bapgood

    Taifun GT Discusion!

    Just pull it out, it won't hurt anything. Just don't grip onto it hard enough with a pair of pliers to bend it.
  16. bapgood

    The "WeekEnder"

    Happy new year every one!!!!
  17. bapgood

    My DNA20 box mod project build

    High speed steel drill bits, some oil, and the right speed and pressure and stainless drills fairly well. Cobalt drill bits make it easier, but won't take side loads the HSS. Titanium drill bits are HSS coated with titanium oxide, however once the coating is gone from use or sharpening they are...
  18. bapgood

    UVO Systems Aqua ....I want this badboy

    Well I'm on my second setup and I'm still not liking it as much as the Taifun GT. Not giving up yet by any means. Having better luck with the flash e clone out of gate....well as far as vape goes anyway.
  19. bapgood

    Just hemp

    Yeah plus it's nice to visually see where the flow control is. I think it looks pretty good as well
  20. bapgood

    The "WeekEnder"

    The DNA screens can be fragile....more so where the ribbon connects to the screen, the ribbon to pcb connection can also be a vulnerable connection but not as much as the ribbon to screen. Making sure the screen and DNA are securely mounted with as little force or potential of force applied to...
Top Bottom
Forums
Products
Vaping.com
Star Suppliers
Blogs
Menu