Search results

  1. Taowulf

    Joyetech Delta II SUB-ohm

    Looks are good, I got one in Black today. It is not even in the same ballpark as a decent RBA though (I am mad at the seller, it gave every indication the RBA head was included). Compared to the Lemo, Lemo2, Orchid, Subtank Plus and the exceptional Billow v2, this is weak sauce. Oh, and it...
  2. Taowulf

    SXmini M Class (TEMP CONTROL)

    Not to mention the 20 or so employees that are losing their jobs...because few Washingtonians want to move to a desert...even though I did. :) But Arizona? No way, too hot. Gov. Jay Inslee is an idiot.
  3. Taowulf

    SXmini M Class (TEMP CONTROL)

    I assume you are referring to prebuilt nickel TC coils? No idea, never used one. I will have some next week though to try in a Subtank Plus. I've been troubleshooting with my Lemo, made a thread about the issue I was having and how I fixed it...in the last two days, I have rebuilt the lemo and...
  4. Taowulf

    Using the original Lemo for TC builds

    As many of you are well aware, small resistances in temp control builds can make a huge difference. After a day with the Lemo on the SX Mini, I was noticing recurring "Dry coil" warnings, some of which could be resolved by a little twist of the Lemo on the 510 connector. But the problem not only...
  5. Taowulf

    SXmini M Class (TEMP CONTROL)

    Of the 4 regulated devices I am using, it is the best quality out of the 4. I only have one gripe with it so far and that is more due to the tank I was having an issue with. Was that what you are looking for? :)
  6. Taowulf

    SXmini M Class (TEMP CONTROL)

    Well, I am happy with the 2.2 upgrade...I can turn that damn sensor off now.
  7. Taowulf

    Eleaf Lemo II

    Different atomizers will affect the resistance reading differently. I have very similar builds on the Lemo and Lemo2. The lemo2 shows .22ohm and the lemo shows .08. Both vape fine. go figure.
  8. Taowulf

    The Billow v2!

    itty bitty bow ties. seriously, you don't need much wick at all, you probably have too much. just enough to tuck in above the juice channels. The VG might have a lot to do with it as well, the juice I am vaping right now is not quite that high.I am probably using a thicker bit of cotton than you too
  9. Taowulf

    ipv4 temp control question

    Nickel builds below .12 work fine on the IPV4. This particular build shows as .078 on the SX Mini M Class. I think the limit is .05, at least the first build I tried was below that IIRC and it would not fire. My other nickel build shows around .2. But every build I do on the Lemo comes out way...
  10. Taowulf

    The Billow v2!

    I rebuilt mine today with 26ga as well, currently vaping it at 60w, but it goes to 65 easy...I've tried higher but this is where I like mine. :)
  11. Taowulf

    IPV4 preorder

    Seems to give a more flavorful and cloudy vape with the same tank and coil. It may have been the "powerful" mode it defaults on at first, but I like the vaping experience better in standard mode as well, compared to the IPV4. Not saying the IPV4 vapes bad, just that I like it better. It is...
  12. Taowulf

    Single or Duel Coil for VV. Specifically iStick 30W.

    OP is also using a Protank, which does have dual coils available.
  13. Taowulf

    SXmini mod ... Yihi

    I know there is a tube extension for it, but this is a vaping mod, not a fully automatic pistol.
  14. Taowulf

    Single or Duel Coil for VV. Specifically iStick 30W.

    Start by going lower until it no longer tastes burnt. If I recall correctly, the .9ohm dual coils heads I used to build for my Protanks used 6v, the 2.2 coils would need less.
  15. Taowulf

    SXmini M Class (TEMP CONTROL)

    I was getting some dry atomizer warnings, so I decided to rebuild the Lemo that I have on the M class. Rebuilt the Lemo 2 as well, that is on a different device.
  16. Taowulf

    Snow Wolf 200w With Temp Control

    A couple sites have it. Google is your friend. :) Asmodeus, vaportekusa and cigbuyer (horrible name) were the first three that came up for me.
  17. Taowulf

    S class vs. M class

    Temp control on the M class.
  18. Taowulf

    The Innokin iTaste VV V3 owners group

    It's all good ;)
  19. Taowulf

    Pioneer4You IPV4 : Unboxing, detailed look and thoughts, and first problems found

    Gotta be careful with putting the batteries in and taking them out...this mod will chew up the heat shrink for certain. I always have to make sure I slow down when I am swapping them.
  20. Taowulf

    The Innokin iTaste VV V3 owners group

    .7ohms? People still vape that high? LOL
Top Bottom
Forums
Products
Vaping.com
Star Suppliers
Blogs
Menu