Search results

  1. Joshuasculptor

    Made another e-pipe :D

    so Im trying to remember where I saw the part you used for the stem connection was it on top of a faucet for the handle and is that the brass rod that pulls the drain? My day job is granite counter tops I see a lot of different stuff. And Im not shy to take a jump in a dumpster if there is a...
  2. Joshuasculptor

    Made another e-pipe :D

    I started my second wooden mod this past weekend we will see if it makes it to the camera before the garbage can. side note if I would have seen half the mods I have now on youtube etc the first one would have been sported and retailed around $200! lol! I used wood in the first one it was vv...
  3. Joshuasculptor

    Drilled air hole to large..now what?

    you can use plumbers epoxy as well(grey) I would just try to get use to it I drilled mine out to 5/64 or 3/32 or a 2.33mm this is all about the same size. I did mine knowing what I was doing. Helpful hints: If you tilt your tank and don't let the wick go dry you will be fine. Don't pull your...
  4. Joshuasculptor

    Candidate for flashlight/power pack mod?

    you can mod anything though.
  5. Joshuasculptor

    Candidate for flashlight/power pack mod?

    I would be more worried about it only being 1.5amps
  6. Joshuasculptor

    WIP - Steampunk Inspired Mod

    god your profile pic coolbud makes my stomach turn! nice mod
  7. Joshuasculptor

    Made another e-pipe :D

    nice! i like this! so on the side plate, did you use electric etching? Or was this something you bought? I have been trying to get my feet wet in modding I have done a few but set them aside unfinished do to dissatisfaction. Sucks to be a perfectionist.
  8. Joshuasculptor

    SmokTech The Natural - New mechanical device

    I did add a brass ring between the top and first sleeve I got it from a saw blade arbor hole. will post pic when gmail is not lame
  9. Joshuasculptor

    SmokTech The Natural - New mechanical device

    I don't know if it is mine only (I doubt it) but if you just sand the chrome off you screws they are brass no need to mod anything. I used 320grit paper. I am brass top and bottom and switch leg
  10. Joshuasculptor

    SmokTech The Natural - New mechanical device

    you can just adjust the plastic disk up or down to fit your battery
  11. Joshuasculptor

    IMR Batteries "What exactly does "IMR" mean?"

    To add don't take anything I say as gold I am by far not the person to ask do the research.
  12. Joshuasculptor

    IMR Batteries "What exactly does "IMR" mean?"

    The systemhasfailed, a lot of different variables can cause a internal short. The one I have heard the most about in laymen terms would be with the demand of more run time has forced the development of nano spacing in batteries. Small fragments of metal(dust) in production get trapped inside...
  13. Joshuasculptor

    IMR Batteries "What exactly does "IMR" mean?"

    My brain hurts! I went to the two pages linked in op. Info dump! Number 5 still alive!
  14. Joshuasculptor

    IMR Batteries "What exactly does "IMR" mean?"

    Borrowed from: HERE Battery Guy What exactly does "IMR" mean? Greetings Everyone, I have seen a lot of threads recently on "IMR" lithium-ion cells. DFiorentino and myself have posted some test results recently (seen here and here, respectively). I also have seen a lot of comments...
    • Joshuasculptor
    • Thread
    • batteries battery chemistry ecigexpress evic fasttech imr safe
    • Replies: 18
    • Forum: Devices
  15. Joshuasculptor

    I'm an Idiot! Once again

    So I just got a really good deal(oops wait a min first clue) on 8 - 18350 ultrafire protected xsl orange skinned batteries at fasttech...... S..O....B>> Okay so I just found out I've been duped. Not protected well kinda I read this page about battery anatomy The Anatomy of a Protected Battery So...
  16. Joshuasculptor

    Any reason not to get a AGA-T2 in a few hours?

    A+ tank may need seat belts.
  17. Joshuasculptor

    UD Agi Spring Fix (pics)

    I later measured the resistance on just the spring and it was 1.0 ohm exactly. Amp and watt murder on a mechanical.
  18. Joshuasculptor

    UD Agi Spring Fix (pics)

    I cut off 10.5mm of a 16g blunt end syringe I got from wizard labs. Removed spring from the 510 connector shaft Then I used a punch and hammer to gently tap the tube on to the 510 connector shaft in place of the spring. I measured resistance on my multimeter leads(2ohms) then I read resistance...
  19. Joshuasculptor

    I knew it was too good to be true!

    (Whisper) Hey Joshua, this is your inner voice speaking. I don't think its the vape keeping you up. It maybe that last two(insert 2 brand name pharmies) that you are suppose to take at 6ish that you take at 8 or 9ish so you can get stuff done.
  20. Joshuasculptor

    I knew it was too good to be true!

    dido myrany I had a crash last night for this weeks nightly adventures. I get up between 5am and 6am for work but I have a hard time going to be before 2am.
Top Bottom
Forums
Products
Vaping.com
Star Suppliers
Blogs
Menu