I've been using the Nautilus for three days now with the installed 1.6 ohm atty; have run 3 tanks and so far no issues. I've been vaping it at about 11 watts on the 1.4mm airhole without any dry hits or gurgling. I've gone up to 15, but dry hits start appearing if you do too many back-to-backs...
One of the benefits is that the only way a Vamo will achieve power settings over about 12.0 watts is with stacked 18350 batteries. Another is the fact that current drain is lower meaning cooler running batteries at the same power setting compared to an 18650.
Odd how many people automatically assume something is "crappy" just because they've never used it before. I've been using the EH 18650 2250mAh (relabeled Pannies according to some folks at the candlepower forum as well as EH themselves) for about 3 months with no issues at all. Also have a few...
I received a 134 that did the exact same thing...intermittent hits, and a faint "buzzing" when the button was pressed. Sent back to vendor, new one works excellent...no issues whatsoever. I'd for sure send it back while it's under warranty (90 days I believe) small vendor or not. the size of the...
Some replacement heads aren't made properly; they're supposed to have no-res wire as legs going through the grommet; if they don't, the positive leg gets hot, burning the grommet and giving the taste you describe. I've sent such heads back to vendors with an explanation and they've always been...
The AROs are fantastic. The heads that came with mine are very tightly wrapped, almost micro-coil like...and they steam like nobody's business. Even with both filler wicks in the thing, i can run 60/40 pg/vg at 9 watts chain-vaping no problem. Love 'em!
I was just given a 50ml bottle of DK-4; I haven't vaped a Dekang juice in a couple of years, and I've gotta say "surprised" is the word. It most definitely leans more towards the tobacco with just a light caramel flavor and room smell. It's also not sickly sweet like some "tobacco" e-juices can...
I've used stacked 18350s in my Vamos from day one with no issues whatsoever; I do insure that they're in good working order, that they are equally charged, not damaged, etc. There is a risk in using *any* battery when push comes to shove, as catastrophic failure can and will occur at any time...
Purchased one of the Terminator Tanks and an extra atty from madvapes. Unfortunately I had to get the smaller tank version because they were sold out of the "5ml" tank version. The smaller tank doesn't work well with the TT atty at all...at least the one I got. The clearance between the outer...
These things are awesome, especially the pyrex version. The coils are far superior to the Kanger equivalent. I couldn't be happier with these bad boys!
If you're experiencing an off-flavor with ss mesh or you have a sharp, metallic taste, there's one of two things likely to be wrong...either your wick and coil is not perfect or your voltage is too high or low for your mesh's wicking rate. Using ss mesh is far more precise of an endeavor than...
Grabbed a few of the Pyrex AROs from madvapes; I love these things. They seem to be able to take higher wattage without a dry hit, and the coils look nicer than Kanger head coils; they're almost wound like microcoils...the 2.4 ohm heads have about 9 wraps of wire and the 1.8 ohm heads have 7 or...
Yeah, it's not too hard. I used vise-grips and a piece of leather to protect the cap and just wiggled it back and forth somewhat forcefully at first but gentler once I felt it giving way. I needed to get mine apart to replace the center pin grommet which got whacked when I let my GF use a 510 to...
Just because something is 'Murican made does not automatically bestow infallibility or superior quality control upon it. I owned a ProVari and had a few issues with it; had to send it in twice for a wonky switch; after a few months had to send it back to get the PCB replaced. Finally just sold...
I ordered just the V3 without batteries or toppers from fasttech yesterday...stainless version. Glad to see it does, indeed, have the eGo threading and that it's a brushed stainless. Looking forward to getting mine soon. Let us know how you like it!
If you want real tobacco flavor, you're gonna have to go with a NET juice. Still won't taste like a Marly Light, but there's some damn awesome NETS out there from want2Vape, GoodEJuice, etc.
I second Want2Vape's London if you're looking for Latakia and orientals. It's a NET, so be prepared to have your wicks and coils hate you for vaping it. :-)
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.