Search results

  1. MISTer E

    Cutting Coil Ends (T2) - What do you use?

    dsy5 those Erem clippers look very solid. An awesome work duty build ;) Thanks for the safety warning P1NkY. Even more reason for me to wear my magnifying headgear often. I do like to wear them
  2. MISTer E

    Vivi Nova Rebuild tutorial

    mrelwood thank you for spending the time to do that video. (stomp box in on floor = a fellow guitarist :headbang:) It was very helpful & led me to a few possible new clues to some of what may be going on. I now am led to believe that the "Spin E" coils innate strength due to small wraps holding...
  3. MISTer E

    Cutting Coil Ends (T2) - What do you use?

    I originally bought them years ago in a dollar store & was amazed how much abuse they took (& still shall endure). I will still use these on my guitars, as the bigger wound strings are thicker than the new cutters are rated to handle (only 20 AWG). I intend:) to attempt:unsure: to try :blink...
  4. MISTer E

    No Resistance wire?

    VAPOR SCIENCE Here I used approximately 1 inch of 30 AWG 999 silver wire & used an ohm meter & ac7 to do the testing. Here is approximately 1 inch 32 AWG pure nickle. I must note that the ac7 is stainless steel & adds some resistance. The pure nickle should be @ nearer .08 per...
  5. MISTer E

    Cutting Coil Ends (T2) - What do you use?

    I ordered a pair of these Xuron 170-II Micro-Shear Flush Cutter: Amazon.com: Industrial & Scientific the other day & am hoping they will work better than the old & abused cheap hand dykes/diagonal cutters I normally use on wire. Better days they have seen :ohmy: & fine delicate wire snipping...
  6. MISTer E

    First ever coil working beautifully!!

    Quoiyaien, I notice that until my coil wire gets a blackish patina coating of burnt Ejuice fully coating it, some of the wire flavor can be noticed early on. I use low flavor or no flavors thus it takes me longer to get the coating(les than a ml) than you should have with flavored mixes. I hope...
  7. MISTer E

    Vivi Nova Rebuild tutorial

    Gdeal Here is the unsteel wooled 28 expanded.( I took it yesterday & the steel wooled 28 from this morning got removed to to do the pure nickle demo & did not get an expanded image done.) It may not be precisely accurate due to it pulled off one post during the unravel process :ohmy: &...
  8. MISTer E

    Vivi Nova Rebuild tutorial

    mrelwood, maybe later you can view the video, but is me pinching the coil without a hard short short occurring. I believe this is more than & beyond the basics of how electricity conducts in a wire. I think maybe the shape of coils/filaments may have something to do with it. I am not learned in...
  9. MISTer E

    No Resistance wire?

    Quoiyaien here is an example of what cyclotron means with Here: I used some low resistance pure nickle wire (& a toothpick) to set the hot resistance part coil where I wanted it. The low resistance wire keeps cool & only the resistance wire gets hot. An added + for my use here is that the...
  10. MISTer E

    Wick materials. Safe vs dangerous.

    A co-op may not be needed. I went searching for some of the clear grommets I like due to my extreme distaste for the scent of rubber(even @ mild room temps, Yuck!). The bigger ones on my AGA Hydra are what I sought.(They fit Vivi heads nicely for mE.) I came up with this search...
  11. MISTer E

    Help with Chalice, RBA's

    MISTer E says thank goodness for calcs!, because actually attempting to work & sum numbers myself makes my math dumb mind numb :blink:
  12. MISTer E

    Help with Chalice, RBA's

    When I enter your ohms & volts I get 9,12+ watts.(some people like it hot) A 2.5 coil would get you nearer 5 watts. (most vapers seemingly prefer around 5ish watts) I hope that helps & here is a link to the calcultaor I used. Ohm's Law Calculator
  13. MISTer E

    The "Spin E" coil sure is coil E & wind E

    urquidezj, Thanks for giving the "Spin E" coil a try with silica. I must also thank you for starting the "Vivi Nova Rebuild tutorial". I am a recluse of a hermit & started posting on ECF, due in part to being awed by your excellent tutorial & all of the other tutorials & teachings within ;)
  14. MISTer E

    Vivi Nova Rebuild tutorial

    I want to start by stating that on the "Spin E" coil, the goal is to not have the coils touch. Coils too close defeat the purpose, as the tiny (but existent) coil gaps are a type of surface tension well for Eliquid to enter the "Spin E". I simply have noticed that when they do touch...
  15. MISTer E

    Vivi Nova Rebuild tutorial

    xMackx, I noticed this wonder property (wheres the shorting) in coils touching. I noted this safe property in the "Spin E" coil & found it to be apparently short safe somehow? How I do not know. I speculate dc electrons somehow can not jump the touching wraps somehow? I first suspected the...
  16. MISTer E

    The "Spin E" coil sure is coil E & wind E

    I would imagine if enough silica wick made contact it would be possible, but I doubt it would be the same. I am not familiar with working with silica, but I must note that the soppyness of cotton does much better for me than fluffed up hemp cording did. Its all new to me though & silica may work...
  17. MISTer E

    The "Spin E" coil sure is coil E & wind E

    The Spin E coil is new :2cool:, I only started using it a few weeks ago:blush:, & I have only been vaping since late August :blink:. That said Here are some tips. COTTON COVER [I only started using it on the "Spin E" less than a week ago] The cover does not need to be one piece of...
  18. MISTer E

    Watts do not matter. Its all about wire temp. Read on…

    Gdeal, I imagine the subject matter is a pondered topic to all those working 28. My minds gears churned ideas & thoughts from your words & that = a great read! "Spin E" is Now! & The Future! For space issues & vertical drawbacks, I go horizontal with thE bend "E" "Spin E" coil. I find...
  19. MISTer E

    The "Spin E" coil sure is coil E & wind E

    tricci said Amazon has the large 1lb rolls & CVS has smaller rolls. USP cotton does not need to be boiled or baked. Thus it is ready for use as purchased. northhar, I have not ever vaped a standard boge type carto. I do imagine the Spin E coil mimics some of its positive...
  20. MISTer E

    The "Spin E" coil sure is coil E & wind E

    Introducing The Spun on a pin [with no internal wick] A more idiot proof method? For mE :huh:, it is! Tighter spacing = Quicker wire heat up Less "warm up hit"[much less] needed! Quicker to vape temp! &...
Top Bottom
Forums
Products
Vaping.com
Star Suppliers
Blogs
Menu