Search results

  1. asnider123

    Awsome box mod

    Thanks, I did post an article about this mod in the battery mods section on this forum, about a month or 2 ago ???
  2. asnider123

    The Making of a 3.7 Volt Boxmod 101

    With each hole, I drilled the holes slightly smaller than I needed, then used a round chainsaw sharpening file to slowly increase the size of the hole until the component fit tightly. Whenever possible, I use Forstner bits (search Harborfreight.com to see what I am talking about). They cut...
  3. asnider123

    The Making of a 3.7 Volt Boxmod 101

    This is basically the diagram I used. I just left out the optional USB charger. Diagram from ECF archives. Also please note I put the LED resistor on the negative side, because it was handier. By asnider123 at 2011-09-11
  4. asnider123

    The Making of a 3.7 Volt Boxmod 101

    If it will fit inside, a 2-AA battery box with built-in master switch (like the one I used to build this mod) would give you a master power switch. Just open the box and flip the switch :)
  5. asnider123

    Awsome box mod

    Actually, no probs with Trustfire 14500 protected (the ones with the flames) .. in fact AW's (shown in previous post) are a little shorter and maybe slide in too easily.
  6. asnider123

    Last person to post in this thread Wins!!!

    So far all I have done is make a batch of chocolate hazelnut (about 16mg strength) .. it turned out pretty nice, YUMMY!! When I have more time I want to do more, it's been hectic around here (remodeling kitchen, yard sale, all kinds of stuff going on)..I had to grab an hour to make a boxmod for...
  7. asnider123

    Last person to post in this thread Wins!!!

    Wow! You got a GGTS!! Even classier! A classy PV for a classy person!
  8. asnider123

    Last person to post in this thread Wins!!!

    Yes, I guess I win then LOL
  9. asnider123

    Last person to post in this thread Wins!!!

    Congrats!!!! That's cool! You're cool!!! Which model did you win? Mine is the GGTB. If your is also, it includes a telescoping battery spacer so you can use your 14500's on it. An 18650 is just a little too fat, I think it was designed for the 17670. Anyway, I love mine but, with all my...
  10. asnider123

    The Making of a 3.7 Volt Boxmod 101

    Hey Kris, are you the one who was gonna make a mod out of a candy tin? How did it work out?
  11. asnider123

    The Making of a 3.7 Volt Boxmod 101

    Hope it helps you be successful :)
  12. asnider123

    Awsome box mod

    I think it is a great basis for a mod, I did one a little while back myself... 5v 3A mod with USB output as well for charging cellphones, Janty Sticks, etc. Go for it
  13. asnider123

    The Making of a 3.7 Volt Boxmod 101

    This is a boxmod for the beginning PV modder. Not very sophisticated, But it works great and lasts for hours on a charge. Tonite I built a 3.7v basic boxmod for my Granddaughter's Mother-In-Law (not sure what that makes her to me???) .. who wants to quit smoking and start vaping. I know there...
  14. asnider123

    The Lowly LED, A Primer

    With my mods, I use bi-colored LEDs in conjunction with N-Channel MOSFETs. The FET has one pin that's B- when the master switch is on, the other B- only while vaping. I will do another primer shortly on how to make a mod using the 3103 MOSFET. It should become clear as you study the MOSFET...
  15. asnider123

    Last person to post in this thread Wins!!!

    I think that would be cool!!! I'll PM you ::)
  16. asnider123

    Last person to post in this thread Wins!!!

    Hi Lox, It's cool!!! I fully understand your position as a mod, NO $$ EXCHANGED .. I was offering to send a few bucks to help defray the shipping costs for those kind enough to donate their tired, or old, or malfunctioning PVs. At the same time, I suspected that this may violate the PIF...
  17. asnider123

    The Lowly LED, A Primer

    The lowly LED (light emitting diode)adds an indicator to your DIY mod that shows that it is functioning properly. In it's simplest configuration, the LED goes directly across the atomizer connector. Make sure you use a resistor on one leg of the LED (contrary to popular belief, the resistor...
  18. asnider123

    Godzillamizer V3

    13 days on the leak test and counting .. still tite seals .. this design is wonderful! Lots of draw, lots of juice, no leaks, no drips, no mess .. WOW!! Gotta get me more of those #1/2 seals!!!!!! Got lots of CE2-XL's to mod
  19. asnider123

    New Mod, Any Interest?

    Hi Don, watcha gonna do with the bad one? Jes wonderin' .. sounds like a project. Alan in Oklahoma
  20. asnider123

    New Mod, Any Interest?

    Don, I just got a PV today that looks just like the one you pictured in your OP, flat cap and all, the only difference being that mine has a plastic blue lighted button, not chrome button. Got it as a present and without any box or anything, and no visible markings on the unit itself, so can't...
Top Bottom
Forums
Products
Vaping.com
Star Suppliers
Blogs
Menu