Search results

  1. niczgreat

    S-Body Bottom Feeder S-Ca3 50Watt-Opinions

    Just found on another site where to buy a replacement bottle that will fit. Empty Plastic Bottle with Needle Top - 10ml
  2. niczgreat

    S-Body Bottom Feeder - opinions?

    Just wanted to double check, you bought the bottle and the threading fit.
  3. niczgreat

    Squonking Technique for RBA with one or two holes.

    You are probably going to laugh at the simplicity of this technique. It's only applicable to RBA that are drilled with one or two holes and preferably a flat bottom with no reservoir. My favorite being the IGO-W modded for bottom feed by Rob and with two holes drilled a little wider then came...
  4. niczgreat

    S-Body Bottom Feeder S-Ca3 50Watt-Opinions

    The Pass Through is working like a charm. Much more important then I thought. It's Keeping the battery fully charged. I can't vape faster then this Puppy is charging. Kind of nice not to worry about battery life.
  5. niczgreat

    S-Body Bottom Feeder S-Ca3 50Watt-Opinions

    Absolutely no delay or lag whatsoever. Not sure if this APV ever really goes to sleep.
  6. niczgreat

    S-Body Bottom Feeder S-Ca3 50Watt-Opinions

    On the 2nd day I'm enjoying it much more. I'm vaping 45 Watts with a Igo-W Dual Coil at .43 Ohms. The .43 seems to be a sweet spot with this APV. When I was vaping on a .89 OHM at 45-50 Watts the boost was too much for the batteries. I've been vaping pretty heavy for the past 3 1/2 Hours the...
  7. niczgreat

    S-Body Bottom Feeder S-Ca3 50Watt-Opinions

    Well it arrived today and below are some of my impressions My main gripe was that I found the bottle extremely hard to unscrew and re-screw on. I was surprised that it worked cleanly and not much mess when I unscrewed it after a little vaping. I liked the feel of the buttons and the fit and...
  8. niczgreat

    S-Body Bottom Feeder S-Ca3 50Watt-Opinions

    Well I pulled the trigger on the S-CA3 bottom feeder from Angel Ecigs and it's arriving on Monday. There has been confusion in the market because there is another S-Body with Lower specs. This one is 50 Watts and you can go down to .20 Ohm. So I opened a new thread because the other thread is...
  9. niczgreat

    Geyscano Box Mod (Chinese 50 Watt BF'er)

    What kind of battery life are you getting. Are you using the RBA that came with it. What Ohms are you at?
  10. niczgreat

    Geyscano Box Mod (Chinese 50 Watt BF'er)

    Ok Unsure you convinced me. Just bought the S-body S-CA3 50W 18650 Variable Wattage VW Box Mod from Angel. I like the look of it, although the Button in the front instead of on top looks like a recipe for Misfires. Sigh... A contributing factor is that for whatever reason my Reo LP will only...
  11. niczgreat

    S-Body Bottom Feeder - opinions?

    Seems to be confusion. There are two S-Body mods on the market. The higher one has S-CA3 in the part number and sells for around $65.00. It is 50Watt and will work down to .20 Ohm. The other is only 15 Watts and states 1.5 Ohm Minimum. It sells for around $30.00 So far the bad reviews are for...
  12. niczgreat

    Geyscano Box Mod (Chinese 50 Watt BF'er)

    Well it worked for around 3 months then the chip went bad. Whenever I insert a battery it says that the Battery is empty. Guess I'm going to have to stick to Mechanicals Bottom Feeders.
  13. niczgreat

    Geyscano Box Mod (Chinese 50 Watt BF'er)

    I think the interest has died because everyone was waiting to hear how good or bad it is. Most are having a good experience with it and feel they got there moneys worth. Now we just have to wait a while and see who checks in that it's gone dead on them. Mine is running like a champ. For me the...
  14. niczgreat

    Best atomiser for the Reo Mod?

    The Reomizer 2 is a great Atomizer but small and not the best for dual coils. Reo sells a modified IGO-W that is plenty big enough to build dual coils. It's my personal favorite. You do need to get the holes drilled larger when you use it in a dual coil setup.
  15. niczgreat

    Geyscano Box Mod (Chinese 50 Watt BF'er)

    Forgot my Greyscanno went out and didn't vape for 3 hours, Just set it down to 25 Watts. Very strange. Seems that at the higher Ohms need less Watts to get a satisfying vape. Taking long cooler drags. Anyone ran into this.effect of higher ohms translating to needing lower watts? At this point...
  16. niczgreat

    Geyscano Box Mod (Chinese 50 Watt BF'er)

    I bought an BF IgoW from Reos Mods and by accident they built it at 1 ohm using 28g wire. I was shooting for .65ish. I decided to accept it and he agreed to rebuild it if I turned out not liking it. The atty build is solid and not shorting. It's a very good vape at around 35 Watts. The issues...
  17. niczgreat

    Squonker Tubes Don't Forget To Snip

    The inverted V looks great, thanks for sharing that video with me. Guess there is always something new to learn.
  18. niczgreat

    Geyscano Box Mod (Chinese 50 Watt BF'er)

    Got to love Chinese Quality Control I'll second that *~* ohy veh lol
  19. niczgreat

    Geyscano Box Mod (Chinese 50 Watt BF'er)

    When you inhale and hold in the lungs less clouds are produced also I didn't squonk before inhaling. Hope you like this picture better
  20. niczgreat

    Geyscano Box Mod (Chinese 50 Watt BF'er)

    I don't need, I prefer. It's called Laziness. I prefer to let someone else build it. Then I re-wick it myself. A good build lasts for 2 months. There is a reason why executives are often driven around by Limousines.:) Just because I know how to do it doesn't mean that I have to do it.
View older results
Top Bottom
Forums
Products
Vaping.com
Star Suppliers
Blogs
Menu