Search results

  1. B

    Smoketek sux!!!!

    Nope, the one in PBusardo's review is smoktek, not smoketek and not smoketech. I just checked to be sure and a google search of smoketek turns up no website.
  2. B

    Vamo with RBA reads the Ohms lower than they actually are!

    Then maybe it's just your Vamo? Mine reads spot on in either 18650 mode or single 18350 mode. In stacked 18350 mode mine reads 0.1ohm too high, but that is a common issue and is easy to just subtract 0.1ohm. I checked my Vamo against my fluke multimeter by the way and both are exactly the...
  3. B

    Need some help on inhaling technique.. EXPLANATION & illustrations

    I am with you on this. When I smoked cigarettes I ALWAYS inhaled into my mouth til it was full, then I sharply sucked that into my lungs. I guess for 10 years I smoked cigarettes the wrong way? I read that thread on how to inhale electronic cigarettes and was like "how is this any different...
  4. B

    Bloomington IL (please help if you live here or close by)

    Yep flat tops won't work in a provari, but we still aren't sure if the ones they have are flat or button. Panasonic makes them in both flat and button, so until they respond on which they have it's all in the air.
  5. B

    Bloomington IL (please help if you live here or close by)

    Hey onry, things are going great for me. I am still breaking in my hh357(6 days now) and am really starting to love this thing! I am browsing the other sections of ECF since I really haven't explored too far outside the new members section yet. I am currently on the hunt for a new APV and doing...
  6. B

    Bloomington IL (please help if you live here or close by)

    I was just doing some reading on that battery with the provari, and it seems like a lot of people are having success with it. My question is are you using the button top version or the flat top one? The flat top, as far as I can tell, will NOT work in the provari. The button top version will...
  7. B

    OFFICIAL AvidVaper.com HH.357 discussion thread - Part 2

    I have heard that before and is actually why I was so interested in trying the 357 to begin with. With my other atties that I have used they would be great for a week or so then rapidly start declining. The HH seems the opposite, which I really like. Every night I blow the liquid out of it and...
  8. B

    OFFICIAL AvidVaper.com HH.357 discussion thread - Part 2

    I have been using this 510 hh357 2.0ohm for about 6 days now and I have to say it is really starting to shine. My flavor issues are completely gone now, and vapor production is almost double what it was straight out of the box. Much more use is needed to see how it holds up in the long run, but...
  9. B

    OFFICIAL AvidVaper.com HH.357 discussion thread - Part 2

    Hey BigCypress, Hanna just private messaged me this morning and said the best way to get in contact with him right now is to email him at hybridvapes@gmail.com
  10. B

    OFFICIAL AvidVaper.com HH.357 discussion thread - Part 2

    I completely agree with that. I got out the lighted magnifying glass and was peering into it for a while, trying to see if I could see anything else. The top layer around the outside of the ceramic cup looks completely intact with no frays or anything, which is why I think those little pieces...
  11. B

    OFFICIAL AvidVaper.com HH.357 discussion thread - Part 2

    UPDATE Ok I think I solved all my issues here. What I did. I blew out all my juice and cleaned in alcohol. I then took a syringe with no needle and hooked it to the threaded end with a little piece of tubing. Filled the syringe with alcohol and blasted it through the atty a couple of times...
  12. B

    OFFICIAL AvidVaper.com HH.357 discussion thread - Part 2

    I know he will if it comes to that. I just wanted to troubleshoot here for a while first. Don't want to bother Hanna unless I absolutely have to, I know he is a very busy man what with hand building all these 357's! I read through every page on this thread and part 1 before I even ordered mine...
  13. B

    OFFICIAL AvidVaper.com HH.357 discussion thread - Part 2

    At this moment I am using it on a vision spinner(essentially ego twist) with the voltage set to 4.2. Yesterday and the day before I was using it on both a provari and vamo. It's a 2.0 long barrel HH. On the provari and vamo I kept playing with the voltage. I went as high as 4.4(slowly worked...
  14. B

    OFFICIAL AvidVaper.com HH.357 discussion thread - Part 2

    I get that, it is a juice I am very familiar with though. When I say the 357 isn't producing very much vapor I am comparing the vapor with the same juice to another atty, clearo, and carto. Side by side with the same juice, the 510 HH357 2.0ohm long barrel, and a regular 510 2.0ohm cisco spec...
  15. B

    OFFICIAL AvidVaper.com HH.357 discussion thread - Part 2

    You guys are helping a bunch, it is helping me narrow things down. I am using 70/30 pg vg. I am checking for the gurgle every time before I fire the button. Right out of the package(after blowing the primer out) I put 6 drops in, let it sit for 30-45 minutes to be sure everything was wicking...
  16. B

    OFFICIAL AvidVaper.com HH.357 discussion thread - Part 2

    Thanks, that is the technique I have been using from the start. At least I know I am doing that part correct. I will continue to experiment with my draw speed and see what happens. Edit: Just to clarify, I can taste my juice flavor. It is just being accompanied with a strong metallic taste.
  17. B

    Different Cottons for different wicks

    Thanks for the pics to illustrate. As soon as my kanthal comes in tomorrow or the next day I will be rebuilding my vivi nova with this technique. I will post up my review on it after I have had a day or two with the cotton. I also have some peaches and cream cotton to test out. For everyone who...
  18. B

    OFFICIAL AvidVaper.com HH.357 discussion thread - Part 2

    Thanks for the advice. Almost all of my juices are almost completely clear, with the exception of a coffee juice(that I haven't used in it by the way). I have cleaned between each juice, with each giving the same metallic taste. I am just hoping it is just the wire breaking in, although I am...
  19. B

    OFFICIAL AvidVaper.com HH.357 discussion thread - Part 2

    I have tried this as well, and I have tried rinsing it with straight pg a few times to no avail. By the way I also always blow it out with my mouth on the threaded end as per the instructions on the site.
  20. B

    OFFICIAL AvidVaper.com HH.357 discussion thread - Part 2

    This is the tin I am talking about, it was mentioned quite a few times before the thread was moved to part 2. Sorry I can't find any of the exact posts, but this is the picture posted quite a few times as being the official packaging. It seems I am not the only one that missed out on it, so not...
Top Bottom
Forums
Products
Vaping.com
Star Suppliers
Blogs
Menu