Search results
-
Orion V2 roll call
By the way, am I the only Orion user who's tank is always filled with burnt juice (juice of a darker color sitting at the bottom of the tank). I tried a 3/4 wrap, and a 4/5 wrap, 30-60mm wick, and my tank is constantly filled with burnt juice. -
Orion V2 roll call
I guess it is time to save up and put myself on the list for the v3 when I have enough cash! :D -
How to Increase Flavor and TH with DIDs and Provari?
Since you're using a DID, you can't work a dual coil with it, but you can work a twisted coil in it. Try this: Wrap a 3/4 wrap with twisted coils using Kanthal 30AWG, and make a solid fat wick (about 50-60mm). I use this with a mech mod and it fires great man. Also, don't use the fill hole... -
Help with Bliss Rebuildable Atomizer
Get at least a 32 kanthal, that way it won't short as much as a 36. There was a discussion early on. As for your mesh, I heard some people were having problems with their BliSS and they made a wick with a hole, and it worked. Therefore maybe you can give that a try. I hope this helps! -
Orion V2 roll call
Just something i noticed in the picture but with the airhole right there, does that mean that we wouldn't have to sand any tanks anymore? :evil: -
Airhole getting stuck with Juice on the Orion 2.1?
Ahh tried that as well... 15mm - 60mm range... I'm guessing the problem is that it wicks too fast and then leaks if I tilt and vape. The solution is to only vape between 4-5 o'clock angle which is weird for me as I don't usually do that. Thanks for the feedback though :) -
Orion V2 roll call
Oh I've always had this question in my mind; is the switch regulated? Meaning it will fire 3.7V constantly till the battery reaches 3.4V? On a side note, I got a feeling the VV/VW will be a 3 click switch with LED lights, like an eGo, but Palipoe style :evil: -
BLISS rba pics and setup
Try squeeze in a 50-60mm wick, use twisted coils, and it should fire fine with better flavor :) -
Airhole getting stuck with Juice on the Orion 2.1?
Hey guys, I'm not sure whether any one else are having this issue but I ma having this problem of getting juice 8/10 drags stuck at the airhole. This means that the juice is blocking the airhole and making a chooked up sound... It hasn't happened on my Genesis Maxi, nor DID. I tried to make a... -
-
Orion V2 roll call
That's where I recommend to get the Boge Rat Top Cap; custom drip tip+ lower stock airhole. So I have a stock cap, boge rat with lowered air hole (it fits perfectly alligned wth the wick on the stock tank given by Les, just a little off a lil and I raised the tank just a little, it isn't... -
Orion V2 roll call
From what I read, every Orion is different. But, my rough estimation would require you to get a 21mm. Hope this helps D: However, if you find that 21mm is too long, then you can sand it down to your required height. If you get a 20mm you only have a 19-20mm range, compared to having a 21mm-19mm... -
Orion V2 roll call
Feelin' all good with my Orion! Some tob menthol juice, 18350 mode, 3/4 30awg kanthal wrap on 35mm width mesh = perfect sat afternoon for me :D -
Orion V2 roll call
Or else, get a boge rat cap :) Or even better, sand it down and paint the outsides to a different color :D -
Hey! Thanks for helping me out with sourcing the parts for the Orion :)
Hey! Thanks for helping me out with sourcing the parts for the Orion :)- Whoopin
- Profile post
-
Orion V2 roll call
I just keep it simple and it works 9 out of 10 times on my Orion. Blast the mesh x2-3 Roll Put your choice of coil setup (be it a twisted coil or single coil) Works for me everything. Be careful not to wrap your coils too tight, but make sure they are touching the mesh. Also, if you're having... -
-
Orion V2 roll call
I'm loving the form and function, but not the looks as it is taller then the original, but the finish is great! Threading wise, it is a bit difficult and not as smooth as compared to the original cap, but to me, it is just a small matter. Everything else, I get to fit in my not so great... -
Orion V2 roll call
I haven't got the pluid but damn that green liquid would look so fine in this cute size Orion :P C'mon, I'm not the only one that loves the green right D: -
Orion V2 roll call
One of my friend said that Pluid wouldn't work well on pyrex as it, too, will crack it? Not very sure, but then I guess Fuzed Quartz Tank is the best and to be safe if you don't wanna crack ur Pyrex :)