Search results
-
Was just giving this
This is not a vw/vv mod, right? Sent from my K6000 Pro using Tapatalk -
iStick Pico settings.
That's dependent on your coil and preferences. If you're using a plain coil with thinner wire your unlikely to need preheat at all, whereas if you use beefy coils with a lot of mass you might need a lot of preheat. I use temperature control pretty much exclusively so I don't have much use of the...- KenD
- Post #7
- Forum: New Members: Introduce Yourself!
-
iStick Pico settings.
Those are the preheat settings (for vw only). Power is the power of the preheat, time is the length the mod will fire at the preheat wattage before the mod goes to firing at the normal set wattage. "Off" means that the preheat setting is bypassed. Sent from my K6000 Pro using Tapatalk- KenD
- Post #2
- Forum: New Members: Introduce Yourself!
-
Predator 228 kit w/ 2 LG HG2 batteries for $50? I'll take one!
The pin is (apparently) very good, it's the 510 negative threads that are at fault. Badly press fitted. Really disappointing. Sent from my K6000 Pro using Tapatalk -
WISMEC Predator 228 with Elabo Kit
I pretty much marry my mods to specific atties and never remove them so I should be fine. Nonetheless, this is really disappointing. Sent from my K6000 Pro using Tapatalk -
-
WISMEC Predator 228 with Elabo Kit
Seems indeed that there are serious (new) problems with the Predator 510 connector. The negative threads are press fit, badly, and will dislodge from the mod easily. My Predator was sent out just a couple of days ago. Wondering if I should return it or deal with the problems when/if they... -
DNA250 to Lock or not Lock Ohms that is the question.
It's generally not recommended to lock the resistance on DNA mods unless you have issues with an unstable atty/build. Sent from my K6000 Pro using Tapatalk -
Looking for a quality Mod.
My main point is that a mod with a DNA board will be significantly more expensive than one with a Joyetech, Smok etc board, and the possibility of getting the board fixed/replaced isn't that compelling due to the shipping costs. In most cases it would probably be more cost effective to simply... -
Mod getting hot while charging
What the above poster is claiming has been contested by many others here. As a general rule, it's a bad idea to use an underrated power supply (usb wall wart). Yes, the device might charge at a lower current, but it's also possible that the power supply overheats and fails. Do you really want to...- KenD
- Post #38
- Forum: New Members: Introduce Yourself!
-
Flavoring Percentage?
Different brands and flavours require different percentages. Ideally the manufacturer/vendor should provide information on suggested percentages. If not, tell us what you're using and perhaps someone here has experience with those particular brands and flavours. Sent from my K6000 Pro using...- KenD
- Post #10
- Forum: New Members: Introduce Yourself!
-
Looking for a quality Mod.
The price of the DNA is also considerably higher though, and if not living in the US the shipping will be prohibitively expensive. Sent from my K6000 Pro using Tapatalk -
Mod getting hot while charging
The Predator won't charge over 2 amps. The rating on the adapter is simply what it can safely provide, the actual charger is in the mod. Using an underpower adapter is worse as the adapter itself will overheat as too much current is pulled through it. Sent from my K6000 Pro using Tapatalk- KenD
- Post #31
- Forum: New Members: Introduce Yourself!
-
Looking for a quality Mod.
I've got nothing against Evolv, but there are plenty of reports of DNA chips failing. Personally, all my Joyetech/Wismec/Eleaf mods are still going strong (as is the sole one using a DNA chip). Sent from my K6000 Pro using Tapatalk -
To all you mech users at 8.4 volts am I wrong
I wouldn't exactly call .28Ω on a series mech "safe". Do you know the accuracy of your ohm reader (you might actually be lower than .28)? Do you only use brand new batteries (the cdr lowers with age/use)? Sent from my K6000 Pro using Tapatalk -
Volt testers
From Mooch's retest results (last year): Sent from my K6000 Pro using Tapatalk- KenD
- Post #24
- Forum: Batteries and Chargers
-
Is getting a mech mod worth it?
I disagree. I used to use mechs pretty much exclusively but nowadays they're all collecting dust. Sent from my K6000 Pro using Tapatalk -
Volt testers
And the vtc4 isn't a 30 amp battery. Sent from my K6000 Pro using Tapatalk- KenD
- Post #22
- Forum: Batteries and Chargers
-
Eleaf iStick "pico"
For me, the Wismec rx200, iStick Pico, iStick tc100w etc have simply functioned better and more reliably than my Reuleaux DNA200 (which is, of course, also a Wismec device). Most people seem to have different experiences though. Sent from my K6000 Pro using Tapatalk -
Eleaf iStick "pico"
I'd definitely choose a Pico over the Hcigar DNA75 as well, and the Wismec rx200 over the DNA200. And I'd likely choose a Wismec Predator over a Lost Vape Therion, though I haven't gotten my Predator yet, and won't be getting a Therion :-) Sent from my K6000 Pro using Tapatalk