Search results

  1. Jeremy Evans

    Built my first micro-coil today

    Doesnt look very micro, I made a 10 wrap of 30 gauge and came out at .2 higher than yours(1.9ohm). You should of been able to get more wraps in there and make it smaller and more compact. Like this, its with a single piece of 1.5mm ekowool in the coil
  2. Jeremy Evans

    Mechanical Mod/RBA safety question

    I know what is far worse than someone who is a Newb trying to go straight sub-ohm is when you see a person who is a vendor and someone that people look to for advice, brag about a new setup and how it is a .2 ohm dual coil and the setup runs at 88w. AW IMR batteries are a 10a max discharge...
  3. Jeremy Evans

    Post pictures of your working wick and coil setup

    Micro-coil at 1.9ohms 10 wrap of 30 gauge
  4. Jeremy Evans

    Micro Coils to increase Vapor, flavor & TH

    Finally made my first true micro coil, Used a 1/16 drill bit and then threaded some 1.5mm ekowool through and had to kinda squish the coil sideways to get it tighter on the wick. Also ended up removing a couple coils last night to lower the resistance, so now it is a 10 wrap of 30 guage...
  5. Jeremy Evans

    Chimbus ? Nimbus Clone

    too easy to fix the air hole issues
  6. Jeremy Evans

    Micro Coils to increase Vapor, flavor & TH

    Just dry fire and push them together, I figured that out sitting here are work with mine, however I dont have enough wraps on mine to get a good micro out of it
  7. Jeremy Evans

    Post pictures of your working wick and coil setup

    Everybody going crazy low ohms needs to make sure they are using the right batteries
  8. Jeremy Evans

    Does anyone have one of the V5 fasttech RDA's?

    you can turn the cap to adjust
  9. Jeremy Evans

    MKB-TS Mechanical Mod (GGTS Clone)

    (DISREGARD)Does it effect the voltage drop at all, or is it just a cap and the standard post still is what is contacting the atty? What was the voltage drop before with standard cap?
  10. Jeremy Evans

    So apparently, the evic and an xray machine don't mix?

    interesting, I guess that is one more reason not to update to the latest and greatest yet. Either way a .02 isnt bad
  11. Jeremy Evans

    Micro Coils to increase Vapor, flavor & TH

    Everything I have is drilled to 1/16 airholes, it's pretty much the perfect middle ground between airy and not airy, I can lung inhale or not with it there. I have another drill bit to go up to a full 2mm but I dont think it is neccesary. 1/16=1.6mm. Now if I could get my hands on a 1.8mm...
  12. Jeremy Evans

    The cat is out the bag!!! (Nimbus aka Chimbus)

    Every great original will have numerous "clones". It will also definitely not hurt their pockets either(most of the time) because there is always people with the money available to purchase their original versions. It's nearly impossible in 90% of all markets to stop close copies hitting the...
  13. Jeremy Evans

    cheapo china hybrid that works

    i think Fasttech has them cheaper, pretty sure that is where I saw it at
  14. Jeremy Evans

    Can't get igo l to work right

    Quality silica can be torched and dry burnt, however if you are using a cheaper silica then they will get nasty fast
  15. Jeremy Evans

    Post pictures of your working wick and coil setup

    Your coils are probably too far apart
  16. Jeremy Evans

    Can't get igo l to work right

    a better pic not firing
  17. Jeremy Evans

    Can't get igo l to work right

    your coil spacing was too far apart also. Here is a pic of mine on an evic with 30 gauge around 1.4ish
  18. Jeremy Evans

    cheapo china hybrid that works

    I saw these the other day.
  19. Jeremy Evans

    MKB-TS Mechanical Mod (GGTS Clone)

    thanks Rule
  20. Jeremy Evans

    Aftermarket steel Evic tubes/sets

    post up some pics
View older results
Top Bottom
Forums
Products
Vaping.com
Star Suppliers
Blogs
Menu