Search results

  1. C

    Vaperfexion Fission 22mm RDA - USA Made/Under $50!

    Hmm, ....odd Sent from my Samsung Galaxy Note 3.
  2. C

    Vaperfexion Fission 22mm RDA - USA Made/Under $50!

    Let me know how it goes.
  3. C

    Vaperfexion Fission 22mm RDA - USA Made/Under $50!

    It can go in about 2 mm. It will be tight, so use a wide thin screwdriver blade and follow the instructions. Sent from my Samsung Galaxy Note 3.
  4. C

    Vaperfexion Fission 22mm RDA - USA Made/Under $50!

    I think your center pin needs to be adjusted inward to make it sit flush on those mods. Sent from my Samsung Galaxy Note 3.
  5. C

    Vaperfexion Kaari 18mm RDA - Coming 11-1-14

    Well it appears this project has run afoul of ECF rules and there is really no easy way to fix it. The rules are in place for a good reason and I do understand the bigger picture that those rules are safeguarding. With that said, Vaperfexion will still produce the Kaari. There are still some...
  6. C

    Vaperfexion Kaari 18mm RDA - Coming 11-1-14

    Haha, really? Food-safe loctite is used everywhere! Far safer than any solder that I know of. Loctite #2046 is amazing stuff and you can eat it out of the tube. Totally food-safe. Loctite#243 is drinking water safe and even stronger. Sent from my Samsung Galaxy Note 3.
  7. C

    Vaperfexion Kaari 18mm RDA - Coming 11-1-14

    I like it alot. We would need to simplify it down though. Sent from my Samsung Galaxy Note 3.
  8. C

    Vaperfexion Kaari 18mm RDA - Coming 11-1-14

    I never press posts. Threaded with locktite is the only way if you're not gonna machine them into the deck Sent from my Samsung Galaxy Note 3.
  9. C

    Vaperfexion Kaari 18mm RDA - Coming 11-1-14

    I guess we could use a ring for air control if we had too
  10. C

    Vaperfexion Kaari 18mm RDA - Coming 11-1-14

    Yeah brass can't withstand a T with 2 sets of holes. We can't go to the exact edge of deck if we want to incorporate AFC, which is a must. The fins need room to rotate. They are thin but still... Sent from my Samsung Galaxy Note 3.
  11. C

    Vaperfexion Kaari 18mm RDA - Coming 11-1-14

    Ok, now I see...looks easy enough. Sent from my Samsung Galaxy Note 3.
  12. C

    Vaperfexion Kaari 18mm RDA - Coming 11-1-14

    Same here with the inquiry from the mods. I understand their need to see what is up though and my goal is to keep everything above board and within forum rules, which I think we have. Since I am a forum supplier, I could give you your own dedicated sticky thread for Catfish within my forum, if...
  13. C

    Vaperfexion Kaari 18mm RDA - Coming 11-1-14

    EDIT: The early posts in this thread mention a partnership that was not allowable due to ECF rules. However, the show must go on...or in this case...the RDA. The Vaperfexion Kaari is coming soon. CG End of Edit Catfish Atty Mods and Vaperfexion are partnering on a new bottom fed RDA...
  14. C

    Vaperfexion Fission 22mm RDA - USA Made/Under $50!

    That's great! I have never used Rayon, I should try it. Sent from my Samsung Galaxy Note 3.
  15. C

    Vaperfexion Fission 22mm RDA - USA Made/Under $50!

    Anytime brother...! I was going to assure you that if you accidentally broke the pin, you will have a spare one in the hardware kit!
  16. C

    Vaperfexion Fission 22mm RDA - USA Made/Under $50!

    To adjust the positive pin....1) Loosen the Positive post on the deck side, counterclockwise at the Knurled end of the post. 2)On the 510 side, use a tiny flat-head screwdriver on the pin itself and thread it either in or out to your adjustment. 3) once the pin is where you want it, retighten...
  17. C

    Vaperfexion Fission 22mm RDA - USA Made/Under $50!

    The 21.5mm would simply be a haircut to the 22mm. A 19mm requires smaller form factor. A 19mm is easy if we keep it single post like the Atomic Sent from my Samsung Galaxy Note 3.
  18. C

    Vaperfexion Fission 22mm RDA - USA Made/Under $50!

    The first series of 50 units is winding down with about 15 remaining. These are already machined, so if we wanted to make a bunch of 21.5mm bodies and tubes, I would do it in the next series. Sent from my Samsung Galaxy Note 3.
  19. C

    Vaperfexion Fission 22mm RDA - USA Made/Under $50!

    I have plenty of hardware choices already produced. While making the units, I toyed with different hardware ideas. I was close to using Stainless, so we ran 500 sets of stainless hardware also. I measured a .195V voltage drop from the brass hardware to stainless, so I opted for the brass. 0.2v...
  20. C

    Vaperfexion Fission 22mm RDA - USA Made/Under $50!

    I'll play around with it and see if the stuff is workable. I know coppers get very gummy in high speed cnc machining. But if it seems feasible, I'll gladly make some. I have a few projects rolling concurrently right now, so I have to squeeze it in. We have the upcoming Aspire bottom coil tanks...
Top Bottom
Forums
Products
Vaping.com
Star Suppliers
Blogs
Menu