Search results

  1. Hello World

    Just ordered my Evic

    I have 2 eVics with over 1,500 hours of use on each, working absolutely flawless. If you are an under 11 watts vaper, it'll do you. Best user menu out there, all the infos you need on a screen. Mine is modded, so much you can do with it as the pic shows (Left one). Edit: over 1,600 hours.
  2. Hello World

    Nic content in RBA's

    Went from 24mg to 8. Then down to 6mg with ceramic wicks.
  3. Hello World

    unflavored nicotine is a great vape

    In my opinion the gateway to systematic DIY too.
  4. Hello World

    ordered an evic today, having trouble finding specifics on battery compatibility.

    As safe as you'd be vaping with stock Provari batteries. Once you do a genny 30ga Kanthal setup, the difference between the batteries become razor-clear. Either one. IMR is the keyword. AW is secondary. I already have the nipple-tops.
  5. Hello World

    Insert your vaping slogan here

    For bumper stickers: E-Cigarettes - The tobacco-free smoke.
  6. Hello World

    Closest Thing To A Njoy King Disposable We Can Get?

    Take a boot across the line. There's ecigexpress in Bellingham.
  7. Hello World

    fc-2000 porous ceramic wick

    I'm running 220mm mesh on a 4mm wide SS 500 wick 30ga Kanthal and nothing less than a mechanical will do it justice. The fragility of the 3/32 is enough to stop me from looking over that way. That can get costly. The 1/8 CF-2000s I'm running are beyond fantastic in every respect. No...
  8. Hello World

    fc-2000 porous ceramic wick

    Exactly why I never take my ZAP out with me anywhere. Even in a pocket where it sits stably vertical, the cap always manages to come off one way of the other. I've had my AGA-T2 cap come a little loose, but never fell off. I never genny-vape near gulleys ... lol
  9. Hello World

    ordered an evic today, having trouble finding specifics on battery compatibility.

    Maybe it is 2.5 amps. But 2.2 is all I saw output. Pushing 30ga Kanthal on either. I don't recall the spec settings. Not something I noted aside from what the amp values were. Yes, 2.85 showed on the menu screen as delivered amps in terms of voltage, resistance and wattage (all just math). I...
  10. Hello World

    ordered an evic today, having trouble finding specifics on battery compatibility.

    The AW IMR 18650 gives the best performance in my experience. In respect to the eVic, the Samsung Li-ion-based on my limited testing delivers around 2.2 amps, the AW IMR around 2.85 amps. You are OK on that.
  11. Hello World

    fc-2000 porous ceramic wick

    I seem to have a knack for the same continuous error ... yes 9/64. Gotta buckle down on that one. In fact the machine shop which milled out my AGA-T2s called me and said 9/16 cannot be done after I left the same error on the paperwork ... :laugh: Maybe you need to leave it soaked in PG for a...
  12. Hello World

    fc-2000 porous ceramic wick

    This may be far out in the ballpark, but worth a try ... maybe freeze the wick, quickly handwrap, throw into boiling pot of water? Yeahs, nays, abstentions? ... :unsure:
  13. Hello World

    fc-2000 porous ceramic wick

    Next time I go to the yard I'll pick up a torch and then do future ones the way you had suggested. (I did a damn good job with what I had on hand, but took over 15 minutes to get 'er on there real tight. Heating is of course much better.) Very true. A few pages back I posted a pic of a 220mm x...
  14. Hello World

    my first rba and its awesome!

    Dry hits. Providing you don't have a hot spot between the top coil around the wick and the pos. post, then your wick is not taking up enough juice. Try tipping your PV for a few seconds before vaping to allow juice to come up. Also make sure enough clearance exists so air can enter the tank...
  15. Hello World

    fc-2000 porous ceramic wick

    Been my setup since I got my CF wicks and milled out AGA-T2s to 9/64. Works like a charm. I run 77PG/23VG juice and the tank can be chain-vaped dry in 1 shot. The moment I receive the CFs in the mail they go straight into a PG tank and left there until I need the wick. Then I wet-burn 2 full...
  16. Hello World

    my first rba and its awesome!

    Hey Kensta ... When I posted fastened down tight I meant the Kanthal coil wire to the bottom screw of the wickhole plate and to top nut of the positive post in the center of same plate. It's likely 32ga then if it came with the RBA, at least it's that on the AGA-T2s. You can apply much what is...
  17. Hello World

    my first rba and its awesome!

    You are using Kanthal much thinner than 32ga or something else is wrong. Make sure coil is fastened down tight if 32ga. If 32ga the Ω should be somewhere around 1.8.
  18. Hello World

    fc-2000 porous ceramic wick

    Mine look dry too looking through the tank. What happens when you fire? Vapor coming up? What is the PG/VG of your juice? Where did you buy the wick? Link?
  19. Hello World

    fc-2000 porous ceramic wick

    4.8mm is very substantial. One would think you'd have to go 26ga kanthal to get sub 1Ω vaping and still get enough wraps in. How do you know it's dry? Appeared dry when looking into the tank?
  20. Hello World

    fc-2000 porous ceramic wick

    Thanks, no worries, thought I'd put the vibe out. Looks if TBinAZ is right, you'll be drilling 5mm or even 1/4" holes.
Top Bottom
Forums
Products
Vaping.com
Star Suppliers
Blogs
Menu