Search results

  1. Kellycat

    Looking for an upgrade from the volt

    If you want to stick to SI products, the X2 is a nice choice, I just don't like the fact they're 'vGo' or 808/eGo as opposed to the more common 510/eGo. Grab a eGo Twist or Vision Spinner with some Kanger Evods for a very good experience, they're about the size of a small cigar and it's easy to...
  2. Kellycat

    vaping dangers

    I've started carrying a 15ml bottle of my ADV with the rest of my supplies, even though I only use eGos and cartos for the most part when I'm out. On the rare occasion I use a tank, I do get some looks, but anyone who's questioned it stops asking when I show them the clearly labeled bottle from...
  3. Kellycat

    Non-mechanical APV with 15s+ cut-off?

    I never vape above around 4.2v, I'm not a cloud chaser, just looking for something with stable performance with a normal atty installed. With the ten amp limit I can go as low as a half-ohm coil at 5 volts and get a full 50w of continuous output power through my atomizer, which is far more than...
  4. Kellycat

    Non-mechanical APV with 15s+ cut-off?

    Couldn't find a dealer with it available, and Evolve's site doesn't seem to list them for sale specifically through them. Pretty much set on using a home-grown device now based on that regulator I posted, I'm no stranger to electronics so it shouldn't take long to build and test something...
  5. Kellycat

    Juice swaps - USA - Please read first post for rules and guidelines

    Looks like the Ahlusions, Nicquid, and probably Cream Soda are headed to Walker843, just finalizing the exact trade now. Remainder of my swap list is still available.
  6. Kellycat

    If you could design a drip tip what would it look like?

    Probably a glass 'rook' style tip similar to the Evod's fixed mouthpiece, just in glass so as to be able to vape tank-crackers without melting the drip tip. I've always found that a limitation of delrin/acrylic/etc, and I hate how steel tips feel in my mouth, somehow I still use my Protank...
  7. Kellycat

    Protank mini

    The Evod coils work fine on the Mini, should tighten the draw too supposedly. The 1000mAh battery will be physically longer, and last longer between charges, otherwise they're identical unless you go VV. The variable voltage will let you tailor your power level to each juice, as well as make...
  8. Kellycat

    Another Newbie :)

    Welcome, congrats on the switch, and excellent choice with the Volts as well, my preferred cigalike batteries. If you need a spare Volt charger or manual battery, drop me a PM and I can mail you mine, I've switched to eGos full time now as I prefer the cigar feel versus a cigarette.
  9. Kellycat

    Found some cheap ego chargers good deal?!?!

    My last order took four days to the east coast, most members report 5-10 on the west coast. So no, not terribly long IMO. I just don't really trust the quality of the FT chargers after the first one I got was pretty much a dud, won't charge from a wall-wart without overheating, can only use on...
  10. Kellycat

    Non-mechanical APV with 15s+ cut-off?

    Also a good point, and a habit I've been using on my eGos, the issue is if I miss the 'sweet spot' to do that on the one with shorter cut-off, it blinks maybe seven or more times, takes about three seconds before I can re-fire. On my Vamo that does work nicely though, hold for around eight...
  11. Kellycat

    Non-mechanical APV with 15s+ cut-off?

    Thanks for that link, gives me something to check my prior DIY VV/VW board against, found a couple errors in mine that could've led to some nasty problems down the road. Funny enough, that's darned similar to what I had sketched out already, just a much more efficient regulator in use...
  12. Kellycat

    What ohms level clearos to buy for 100% vg?

    Yep, I've got a few packs of 1.8ohm Evod/PT heads and all ohm at 2.0-2.1, I'm actually in the process of recoiling them down to 1.6 for use on a fixed-voltage eGo. As far as the original question, the ohms of your head won't make as drastic a difference as the wick setup with a juice that...
  13. Kellycat

    Non-mechanical APV with 15s+ cut-off?

    Will look into both, though I admit I'm leaning more towards something like the Kick or DNA20/12 at the moment. The Kick fits an 18650 tube with 18500/18490 battery, correct? Would work great if that's the case, as I have a Vamo V2 shell here I'm turning into a 'hybrid' mechanical/VV, if the...
  14. Kellycat

    Non-mechanical APV with 15s+ cut-off?

    Thanks, just checked into them, pretty affordable too, only $50 for a chip. Speccing the DNA12 now as I think it'd be more suitable for my intended housing, but both look very nice.
  15. Kellycat

    Non-mechanical APV with 15s+ cut-off?

    Anybody know if there are any APVs that have longer/no automatic cut-offs? My Vamo is pretty close to what I'm looking for, but I still can't fully inhale at the pace I'd like to without it doing the automatic atty shut-off. I generally do a 15-20 second drag before my lungs are full, and I...
    • Kellycat
    • Thread
    • evod provari vamo
    • Replies: 14
    • Forum: Devices
  16. Kellycat

    New Member Intro: Never smoked before but Vape

    Thanks! Didn't expect it to be thinner honestly, I'm definitely going to grab one as my primary in that case.
  17. Kellycat

    New Member Intro: Never smoked before but Vape

    I know quite a few non-smoking vapers, and there's a few threads recently posted on here about the same. Nothing wrong with it, but the replies above are accurate, stay off the nicotine, it's a hell of an addiction to break, even if you don't feel addicted, it'll get you snagged quickly. I...
  18. Kellycat

    Found some cheap ego chargers good deal?!?!

    Assuming they're genuine that's not all that bad a deal, I usually see them retail for $4-$5, that's $3.75 a piece and free shipping..heck I might grab a couple, as the charger I got with a Fasttech kit seems to only half-work.
  19. Kellycat

    First 12 hours into the VV/VW world with Sigelei Zmax V5, Kanger ProTank 2, .5mm ribbon kanthal.

    Was looking for something like this just the other day, as I have kanthal ribbon coming my way and wanted to know if I could pull off a Protank/Evod rebuild with it. Looks like the answer is yes, and I'll be sure to pick up some 0.4 ribbon next order.
  20. Kellycat

    alcohol vs. PG Flavoring question

    IMO Wizard Labs flavorings are usually best around 5%, lower for some like Tobacco Absolute and Cappuccino, higher for others like some of the fruit flavors. It's a bit of trial and error, so I suggest leaving space in your mixing bottles to add flavoring if it needs it. Also, a couple flavors...
Top Bottom
Forums
Products
Vaping.com
Star Suppliers
Blogs
Menu