Search results

  1. HazMatt

    anyone else completely remove airflow screw from KFL + V2 or V3?

    I have Tobeco and EHPro clones and I have removed the afc screw from both of them. It does loosen the draw. The only downside I have noticed is that my normal draws do not properly pull e-liquid into the chamber. But, I prefer the looser draw. To help pull e-liquid into the chamber, I take...
  2. HazMatt

    what to do with 34ga kanthal

    Twisting is fairly easy with a drill. Because Temco made a mistake, I have over 170' of 32g kanthal. I have enjoyed triple and quad twisted 32g coils so much that, I ordered 100' of 36g. I will be attempting some 4, 5 and 6 strand twists of 36g in the near future.
  3. HazMatt

    Kayfun clone - have to rebuild too often

    What gauge kanthal are you using?
  4. HazMatt

    Kayfun Lite + Black Edition V3 by Artimus Sam

    While the description says something about improved airflow, I doubt that it will be a cloud maker. You might be better off getting a Fogger V4. The Fogger is a little trickier to build than a kayfun. But, once you get a good build, it lives up to the name. Having said all of that, a...
  5. HazMatt

    suggestions for VV tube mod in 18350?

    I have been using a mech with an Evolv Kick 2 and liking it. With an 18350 it is shorter than my SiD in 18350 mode. You are limited to a maximum of 15w but, with my kayfuns, I have been staying below 10w for the most part. I have cranked it up to 15w with my Fogger V4 and that is a really...
  6. HazMatt

    Afterburn on KFL+...

    It even happens on mech mods. It just takes time for the coil to cool.
  7. HazMatt

    Kayfun Lite Clone tank question

    Another little filling tip. Instead of holding the tank completely upside down, hold it at a little bit of an angle, with the fill port on the lower side. Fill slowly and when e-liquid starts to come out of the port, stop filling. Then, use the suction of the bottle to suck out a little bit...
  8. HazMatt

    Kayfun Lite Clone tank question

    The only way to really know if it is out of e-liquid is when you start getting dry hits. When I say dry hits, I don't necessarily mean those horrible, burnt, make you want to cough up a lung, type of dry hit. Rather, the vape is just not as saturated as it should be and tastes a little off...
  9. HazMatt

    So whats the current dripper to get? (yes, I'm cloud chasing)

    All this talk of clouds makes me want to dust off my Atomic and put a new twisted dual coil setup in it. :vapor:
  10. HazMatt

    Do you still use clearos and cartos after stepping up to RBAs?

    Don't feel bad. I have 10 PT2s, 3 full size and 7 minis. I am going to give a few away to friends and possibly sell the rest. I also have at least 8 unopened 5-packs of heads.
  11. HazMatt

    Rebuildable Dripper In A 510 Form Factor.

    I guess OP is looking for an RDA that is the size of a HH 357 dripping atty. I doubt one that small exists. Sounds like a Diver or Sofia would be your best bet.
  12. HazMatt

    Do you still use clearos and cartos after stepping up to RBAs?

    Rebuilding the coils does improve the flavor and vapor production a noticeable amount, to me. I used 30 gauge Kanthal A1 and wrapped them to around 1.6 ohms. I think it turned out to be 7 wraps on a 1/8" drill bit. pbusardo and Rip Trippers have good rebuilding videos on YouTube. A PBusardo...
  13. HazMatt

    Do you still use clearos and cartos after stepping up to RBAs?

    I have had a couple kayfun style atties for around a month. For convenience, I was still using my rebilt mini Kanger Protank 2s and used them exclusively at work, on vv egos, with a neck lanyard. Now that I have a proper pouch and neck lanyard for my 18350 SiD, I have not used a PT2/ego...
  14. HazMatt

    My KFL+ V2 ?? Experiences

    To add to my previous 2 posts, I would recommend buying from a reputable dealer. I have had nothing but good experiences with 101vape.com. Unfortunately, they are sold out of the Tobeco kfl+ clones that I bought. They only have a black version in stock at the moment. 101vape has responded...
  15. HazMatt

    My KFL+ V2 ?? Experiences

    I never tried an actual SvoëMesto Kayfun but, my previous post still stands... I would prefer to have 3 of the same Tobecos that I currently own.
  16. HazMatt

    My KFL+ V2 ?? Experiences

    It is amazing how much different batches, from the same Chinese manufacturer, can vary. I guess quality control is a little lacking. If I had it all to do over, I would have bought 3 of the Tobecos, that I currently have, and I would have stayed away from all of the others. I have a...
  17. HazMatt

    My KFL+ V2 ?? Experiences

    The biggest expense in mixing e-liquid is the time it takes to do the mixing and bottling. The price of the ingredients is quite low. Mixing and bottling a 15 ml bottle takes about the same amount of time as a 60 ml bottle. The shop is still making plenty of profit from the 60 ml bottles...
  18. HazMatt

    My KFL+ V2 ?? Experiences

    I have a Tobeco kfl+ and an EHPro kfl+ V2 clone. I actually prefer the Tobeco because, it has an adjustable 510 positive pin and no markings. The EHPro V2 does not have an adjustable 510 and has the counterfeit markings on the bottom. Aside from the different 510s, the build quality on them...
  19. HazMatt

    My KFL+ V2 ?? Experiences

    I would if I could find some at a reasonable price. I have Liqua brand that I brought from Fasttech. They have sold out and it does not look like they will be getting any more. The cheapest I can find here in the states is about $10 per 30 ml plus shipping. I am used to paying less than $6...
  20. HazMatt

    My KFL+ V2 ?? Experiences

    I am only about a month into using kayfuns myself. I also have a few e-liquids that taste too strong in them. I also noticed that I had to start using lower nic levels. I liked 18mg nic in my old Kanger Protank 2s but, I prefer 12mg or less in the kayfuns. I can go as low as 6mg and be...
Top Bottom
Forums
Products
Vaping.com
Star Suppliers
Blogs
Menu