Search results

  1. C

    Introducing the Griffin Rebuildable Atomizer Tank

    I tried both new tubes on the original griffin.They were replacements for the metal tank,I didn't check I. D.
  2. C

    Introducing the Griffin Rebuildable Atomizer Tank

    Got mine today also,1 went on nicely, the other one is way too tight even after using some oil to lube it.I don't want to hit it with anything and break it. I will say it's a huge improvement. As far as the larger cap hole,it's way too airy or me.I opened my original hole to 1.25mm and that...
  3. C

    Gripper Discussion

    I just sent mine back today,inaccurate readings,bad connector,won't work at low ohms. The only good thing about this box is the price and ability to use one 18650 batt.If you look up" cheap piece of junk" in the wiki there's a picture of it.I much prefer the vari-cool vv box.I get about the same...
  4. C

    Introducing the Griffin Rebuildable Atomizer Tank

    The AGA looks like a metal tank. When will they learn?
  5. C

    Young June - First Week Impression

    I've purchased and built dozens of battery holders.Almost all are basically cheap electronic junk pieces that are way overpriced. In defense of the LT,I have one that still works after 6 mos. I don't use it much anymore because it's extremely underpowered,but it does still work. I wish you luck...
  6. C

    Undoing hot melt glue? Help!

    I picked the glue out of two boxes and resoldered them,what a pain. We need a more stable connector or a more solid box. Does anyone know of one.
  7. C

    Young June - First Week Impression

    Finally an honest summary,thanks for the honesty.It's a shame more people on this forum aren't like you :)
  8. C

    American E-Liquid Manufacturers' Standards Association launches

    If the U.S.guys can do what their suggesting and sell it for 4 cents a ml. like the Dekang I get from China,I'll buy it here.(only if it's as good).
  9. C

    Anyone found a rebuildable atty. that they like

    All genesis attys are 2 end caps and 2 screws,they all work the same.I've got 4 of them from the original to the latest $25 clone of the other clones.All work exactly the same.How well they work is up to the individual.It doesn't matter how much you spend on any of these copies. Read the thread...
  10. C

    DUD builds

    I knew you'd get it.These attys are a little touchy,with all of them it usually takes me a day or two of fooling around with them to get everything the way I want it,but it is worth the effort. Congrats...
  11. C

    DUD builds

    You're losing a volt between the top and the bottom of the center post.My only other guess is maybe a tear in the plastic bushing that insulates the center post from it's housing,but if that were the problem I doubt u would be getting 3.2v at the posts.Wish I could be of more help.
  12. C

    DUD builds

    Put batts in,fire the device with probes on box center pin and outer rim. get reading.If it reads same as battery screw the clone into device,place probes on +/- Posts fire it again, if it reads low than it's most likely the clones center post not making good contact with the battery...
  13. C

    DUD builds

    Is your wick lined up with the hole on the top cap? If so and still low vapor,try opening up the hole a tiny bit. One last thought,if u have a multimeter put the leads on the +/- posts and fire it to make sure you're getting enough voltage to the posts.You may need to lengthen the center post...
  14. C

    DUD builds

    Don't bother,I've got 3 other high end genesis atty's and none of them work any better than this clone.You're better off buying more of these or a bunch of clear tanks when they are available.
  15. C

    DUD builds

    My gripper reads 1.0 ohm,my multimeter reads 1.1 ohms.I just screwed the clone on an old 3.7v torpedo w/18650 high drain panisonic battery.It works perfectly.The gripper still won't work.I'm betting it's the chip.
  16. C

    DUD builds

    Thanks for the answer,it's appreciated.Can you try it on another device? My gripper hates it,my MV box loves it.I don't have any other guesses.
  17. C

    DUD builds

    Stick it on a Mad vapes vv box. No error codes,works every time. My gripper gives Lo warning all the time with this atty,the MV box doesn't.You could also try about 8 wraps of 32g kanthal and see if that works.If it does please let us know,I'm too lazy to re-wrap it.
  18. C

    Cheap genesis style tank...interesting!

    Glad you took time to read about Raidy.This thing works as well as any of the more expensive Gen. attys I have.The only thing I'm waiting for is a clear tank,and that's in the works. As far as ripoffs,wasn't it P.T. Barnum that said something about suckers?
  19. C

    Cheap genesis style tank...interesting!

    It's a nice metal cap and screws,just not any better than the one it was copied from.
  20. C

    Cheap genesis style tank...interesting!

    I don't know why everyone's so upset,The Did is a clone of Raidy/Quick's original invention(see modders forum).It's only fair that someone else copies the copy. After all it's only a metal cap with 2 screws and a few nuts.I bought the China clone at Discount Vapors on Fri.,got it on Mon. cost of...
Top Bottom
Forums
Products
Vaping.com
Star Suppliers
Blogs
Menu