Search results

  1. C

    Some homemade attys and genesis

    No problem if you supply all the kit pieces in metric sizes.
  2. C

    Have tried it all Looking for a trouble free Ecig

    If the description has the word "electronic" in it,it will never be trouble free.I would suggest something from bullismoker with their a2 atty.That way if your atty goes you can just make another.I don't know how anything can go wrong with the battery tube.
  3. C

    Some homemade attys and genesis

    @ Lordros..Where did you find 18ga. O-rings, and did you place them in the tank or on the switch case side?
  4. C

    Some homemade attys and genesis

    I like 3/4" od. and a length that will allow for about 3mls. of liquid.That amount gets me through a full day.As far as connectors go,I would love to see see something that doesn't use the little plastic washer to separate the posts.I hate when I melt or break them.
  5. C

    Some homemade attys and genesis

    I also ordered about 2 weeks ago.I haven't heard anything.I did get lucky,and found some @ joanns fabrics in the jewelry making section.
  6. C

    Some homemade attys and genesis

    Hi all,Just a quick update on the crimp tubes.I've been using the tubes for about 4 days now,and I'm really happy with them.the connection is much better and they are very easy to use. About once a day I may have to nudge 1 of them up or down but than it's back to perfect.I highly recommend them...
  7. C

    All my mods part1

    Good luck Raidy,the new atty will have to be very special to beat the genesis.Thanks for your hard work.
  8. C

    Some homemade attys and genesis

    That's the wire I think most of us use. The kanthal and mesh are the easy part.It's all the other parts that are tough.Without piece of cakes help, I couldn't have built mine.If you are successful,you wont be sorry.Good luck.
  9. C

    Some homemade attys and genesis

    @ Cos..Ebay has 30cm x 30cm 316L stainless steel 400 wire mesh for about $8 a sheet.It is listed under "lab supplies" - filtration.It is from Great Brit. so you have to check the shipping cost.It says they ship world wide.
  10. C

    Simple Nichrome Loop Around Wick Concept

    Drawing #2 looks a lot like a genesis atty.
  11. C

    Some homemade attys and genesis

    Thanks Weapon,for those still looking for tubes,go to ebay and search crimp tubes.There's a bunch available.I think I saw 500 1.3m tubes for 99 cents. As for plugging the top hole,I put a small piece of tape over the top half of the hole.For me that seemed to work better than plugging all of the...
  12. C

    Some homemade attys and genesis

    @ Weaponx; Did you have to 'crimp' the crimp tubes.or was it enough just to slide them on?
  13. C

    Some homemade attys and genesis

    Thanks for the link and the vid.X. I just ordered the tubes.I'll post after I get them. I'm glad to see your atty is working so well.
  14. C

    Some homemade attys and genesis

    Either tank is ok,but clear would be better.I'm with you on the connectors,an improvement on those would make my day.
  15. C

    Some homemade attys and genesis

    I'm interested.I like my alum.mouthpiece cap,it's easy to drill an extra air hole in to if necessary.Other than that I'll wait on other suggestions.Please keep us posted.
  16. C

    Bottom feeder for any e cig!

    Build a genesis or a top feeder,you'll be a lot happier.The genesis tastes better and is easily replaced,top feeders work the way an atomizer was designed to work,but don't taste as good as an genesis and cost 3-9$ to replace the atty.Bottom feeders bottom feeders have no redeeming qualities...
  17. C

    Some homemade attys and genesis

    @ Turbo, Both are working great,I stuck a straight pin in the q-tip tube along side the silver wire in the battery compartment.That really made it snug.I also went down from 5 wraps to 3 wraps of .20 wire and that made a big difference.As I stated above,when my vapor gets weak,it's almost always...
  18. C

    Some homemade attys and genesis

    I agree with asdaq,it is probably the kanthal to silver wire connection.When I loose vapor that's always the problem.I wish there was a way to make a secure quick and easy connection.Anyway good luck,you will get it.
  19. C

    $3 Bridgeless Atomizers | GH1

    I tested my 4 dead ones with 2 multimeters.The're still dead.I tested my multimeter on my Genesis atty,it read 2.1ohm just like it should after I wrapped it with new kanthal.I used the same battery in both. @ Tim, Thanks for your response.
  20. C

    $3 Bridgeless Atomizers | GH1

    Hi Tim, Could you post or PM me the address where I send the dead attys back to.I Pm'd you last week but have not gotten a reply, Thanks in advance.
Top Bottom
Forums
Products
Vaping.com
Star Suppliers
Blogs
Menu