good to hear that your 1st attempt came out well
I try all of my new mixes (3ml test with no nic) after I shake them well (tobacco flavors do need to steep some) and then I pop them in the ultrasonic cleaner for three 8 minute cycles and call them steeped and done
I start all of mine at 10% or...
Here is my recommendation for a supplier
One Stop DIY Shop
I would not recommend starting with higher than 48mg nic base until you are sure of what you are doing
Do NOT mix with distractions around (kids, pets, spouse etc)
Get syringes for measuring - counting drops gets old quick and...
So I was bored and was watching some DIY youtube vids - came across a DIY magnetic stir plate video - used a Ziploc brand sandwich container (in kitchen cupboard)- the power supply fan from a dead 10 year old computer (located under my 10 year old newspapers of course), magnets from hard drive...
one thing to remember is the battery does not discharge to 0 volts, it only discharges down to 3.2 volts and then quits firing your atty so dead is not actually dead
Back to the original question - as mentioned earlier I would set your vv to wattage mode and find the best wattage for flavor for you (mine is 7.5 watts) with that being said dual coil and dual coil with afc (air flow control) are much more efficient vaping devices and will give you much more...
Brandon just released the DNA30 board which will go to 30 watts - there will be a slew (ok, 5-10) of new mods in the $150 to $300+ range before too long - you will need to keep a very close eye out as these tend to sell out within 15-30 seconds after being announced (yes, this is an...
you can drip into any appropriate atomizer (ie: a bridgeless atty like mentioned above) you do need to be careful not to over drip though - 3-4 drops max otherwise it will flood the coil and leak down into your battery connections. Yes it will work with your vv3. I have used a 510 bridgeless 1.9...
Looks like a pretty extensive line up of tanks but I don't see any replacement heads listed for any of them - make sure you order a sufficient number of replacement heads (If you are going to order from fasttech only I would get 15-20 of each style so you have back ups for the long wait from...
In my experience most manufactured coils are a +/- of .2 to .3 ohms and yes they will change over time and usage. 2-3 weeks on a coil is excellent in my opinion as I get about 3-4 days on a protank coil before it needs replacing (I do vape a very sweet liquid that will gunk up coils quickly) but...
iTaste VV3 and a mini protank 2 and extra heads for the mini for a more normal sized pv or the MVP2 as mentioned above for a box shaped mod
the Halo Triton uses 808 and Kgo threading so most of the popular tanks and clearos will not fit it with out an adaptor or 2 (this keeps you buying from Halo)
to quote from Deacon Aegis on 4/13/2013
"ProVari's qualify you to become a member of the ProVarinati, which will make you powerful and attractive to women. You may also get a job at MI-6 with a Provari, and everyone wants to drive an Aston Martin, right?"
yes the 18650 will work fine for the set up you have - you only need to stack the 18350's if you want to vape in the 12.5-15 watt range on the vamo (it will display the 12.5-15 watts but it will only reach 12 watts max with the single 3.7 volt battery - it will make a definite rattle snake sound...
I have the tobeco kayfun lite + clone I got off of ebay if you don't want to wait the month+ for fasttech to ship one
easy build, air flow control are both a big plus
you do need a needle bottle or syringe to fill is the only negative I could come up with
clean it twice (wash and dry) before...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.