Search results

  1. grainey1968

    Aye, I am frustrated with my genny

    When you finally get the setup to exactly what you like, it is like night and day difference to the experience. We ALL have struggled to get the best setup, but it will come. Keep at it - the reward to too great! It is totally worth the effort!
  2. grainey1968

    Wire Rope for Wick?

    I got my order from SSdirect (see my last post of this thread). This is not true SS wire rope. Galvanized!! Don't waste your money!!
  3. grainey1968

    28 ga Kanthal, can't get more than .9 ohm.

    28 gauge will be hard to get to a 2.0 ohm coil. You would need about 15+ wraps on your coil. Same advice as the others in this thread - try the 30 gauge kanthal and shoot for around 1.5 ohms on the AGA T2. That is where I find my sweet spot!! Happy belated birthday and congratulations on...
  4. grainey1968

    AGA-T2 first build and a few questions :-)

    Usually there is a break in period for all new setups. 2 to 3 tanks should be enough to get you to optimal performance of your build. If there is still a metallic taste or anything funky going on, I would go back to the setup as there is probably something wrong (hotspot or wicking issue etc).
  5. grainey1968

    too low ohms?

    The holy grail is out there dude - we all seem to be looking for it. BTW - new daily builds!! Try and resist the temptation of throwing away a perfectly good build, just because you think there is another great one coming in your next build. I have learned the hard way that ruining a good build...
  6. grainey1968

    Should I or shouldn't I?

    IMHO - the ZAP and the Provari set up are like the Rolls Royce in terms of looks and performance! It is obviously up to you, but I would be looking for a trade to also get a Provari and mate the two lovebirds together.
  7. grainey1968

    too low ohms?

    Sweet!!!! That will definitely keep you building for a while!
  8. grainey1968

    SmokTech RSST Genesis Rebuildable Atomizer

    D3mon - next time why don't you try coiling you 4/5 with the bottom leg of your coil to the inside (opposite to what you have shown in you pic) of the - post/ screw and the same with your top leg to the outside of the + post. You should end up with a 'S' shape if you looked down from a birds eye...
  9. grainey1968

    SmokTech RSST Genesis Rebuildable Atomizer

    D3mon has better pics, but I thought I would join in. NOTE: I was unfortunate to get on of the RSST's that had the problem with the threads on the connection - hence the large gap. My supplier is sending me a new base for the RSST to correct the problem.
  10. Cobra

    Cobra

    My Cobra on the Provari
  11. RSST

    RSST

    RSST RBA & BOLT
  12. grainey1968

    Wire Rope for Wick?

    Doesn't matter slatronic. Just NOOOO galz!!
  13. grainey1968

    too low ohms?

    Hi D3mon - I would try the 30 gauge for your lighter juice. Only reason is that it is a little easier to work with than the 32 (popping coils / hot spots etc).
  14. grainey1968

    too low ohms?

    Totally agree Rader2146. I was referring to the heat that a thin walled Bolt will omit at low resistances!
  15. grainey1968

    too low ohms?

    Be careful d3mon or your Bolt might just glow in your hand!! Do you have another mod to put it on (safety) or I would try some 30 wire if you have any. The more wraps you put on using the 28 gauge, then it will take longer and longer to get to vape speed!!!
  16. grainey1968

    Wire Rope for Wick?

    FYI Not sure if this has already been covered. I seen a few threads that mentioned getting ss 3/32 7x7 wire rope from SSDirect. These guys are based in Canada. I ordered some and arrived yesterday. Couldn't wait to try this in either my AGA T2 or my Cobra. Done a few tests first:- 1.) Un-twisted...
  17. grainey1968

    Temco has Kanthal Ribbon (Pre-Order)

    I prefer the 0.5 X 0.1 ribbon. Seems to work best of both my mechanical and variable mod setups!
  18. grainey1968

    Temco has Kanthal Ribbon (Pre-Order)

    Just ordered. 9 to 10 week delivery. Hope I don't run out before then!!
  19. grainey1968

    RSST, A8 or AGI?? which way to go

    I also like the RSST. Mostly because of the larger wick hole (i think it is 3.4mm). Means that I can put in a giant SS wick or also have the option to use porous ceramic 1/8 inch wick (these are more readily available than the smaller sizes). A few above have also recommended the AGA T2. This...
  20. grainey1968

    Z Atty Pro condensation

    Note: The condensation depends upon the coil/ wick and the voltage / watts that you have set up on your device i.e. the more clouds of vapor then the more condensation you are probably going to have.
Top Bottom
Forums
Products
Vaping.com
Star Suppliers
Blogs
Menu