Started with a Mechanical Mod but the big change came after buying a VV Spinner. Could adjust it to the diff flavors and could turn the voltage up when stressed rather than using a higher mg.
Hey that's his "Remember When". He's been thru rehab and is sittin' next to me vaping Peanutz Pumpkin 36 mg 8-o
So many times I see new vapers so very concerned about the Nic level they're using...some of my converts were bound and determined to vape a lower mg in the beginning and then got all...
Agree 100% :thumbs: Not saying everyone should go to 36 mg immediately but if needed it's no big deal. If it wasn't used Vendors would not be selling it.
I recall a thread where maybe we were being a little pushy :vapor: Now when a new vaper posts it's your turn to be "pushy" :D It's all good my friend and just so glad everything is working out so perfectly for you. Your OP post includes EVERYTHING at a great price. Kudos and the Best of Luck...
Three factories manufacture the Vamo. One factory seems to have higher QC. All 3 factories use the same pcb/ chipset. Difference is a matter of how they are machined and assembled- threading, solder joints- one Vendor seems to have an issue with cold solder as I've repaired/ re-soldered 5 of them.
The NCR18650B have a 6.8 amp limit meaning they will work fine BUT the low amp limit means they're working too hard and will not last as long as other batts and you can't realize the full potential of an APV. The Panasonic 2900 high drain 10 amp are perfect. I use the 2250 mah and it lasts all...
Should be asking before hitting the buy button. More mah does not necessarily mean you've got the best batt as there are other batt specs you should also be looking at.
The Zmax only fires from 1.3 ohms and up. 1.4 ohms is cutting it close. Seeing as you have a VV/ VW APV why not just use higher ohms and turn up the voltage/ wattage. Also own the Zmax and lowest I go is 1.8 ohms to be safe. Generally use 2.4- 2.8 ohms on it.
Cartos/ clearos can be out by as...
Looks like a good deal BUT note the Evod battery is a genuine Kangertech product whereas the eGo- T is not mentioned as a JoyeTech product. The eGo-T may be a knockoff. I'd get the Evod battery, in fact at that price I'd buy 2.
The Chipset in the MVP 2 is superior to the chipset in most other budget APVs- Vamo, Seigali Zmax, SVD, etc. So no real upgrade unless you're willing spend lottsa $$. Prolly time to check out some other toppers.
Some stuff cheaper and some not so cheap. The only problem I have is in the area of ethics when a manufacturer directly competes with U.S. Vendors that sell their products.
The eGo-U fires at 3.7 volts and the perfect ohms of the CE4 clearomizer is 1.8 ohms. Higher and you'll get a weak vape.
I began on 36 mg Juice and stepped it down to 30 mg after a couple of months. I found the CE4 to have a very tight draw- I prefer the airy draw clearomizer= more vape.
So...
The Nitecore charger is a good one BUT the batts Amazon.com: Two Panasonic NCR18650B 3.7V 3400mAh Rechargeable Li-ion Batteries QTY 2: Electronics are not the proper batts for an APV/ Vamo as mentioned by retic1959/ Post #3.
From Bad about the batts you are considering.
"No. Not these. These...
It's a good price. The eGo batts are disposable with eGo and 510 threading- the most common of threading.
The eGo batts are good for about 250- 300 recharges before they need to be replaced.
The Stardust also known as the CE4 is disposable. With maintenance it can last 2-4 weeks.
Washing...
Here's a list of batteries that are perfect for APVs:
http://www.e-cigarette-forum.com/forum/blogs/baditude/4848-9-battery-basics-mods-imr-protected-icr.html
I would choose the Sonys over the Efests as lately they seem to be hit and miss. I use the Panasonic CGR18650CH 2250 in my APVs.
I own both the V2 and V3 and the quality is much improved on the V3. V2 the button is wonky. V3 is perfectly fine. As for the finish realize the Chrome is a fingerprint magnet and scratches very easily. Friend bought one against my advice. Babied it- within 3 weeks scratched. When the Vamo came...
Thanks and found it. From the Homeowner...
"I was downstairs making a cup of tea. I heard the Fire Alarm and ran upstairs. This is literally 10 mins worth of damage"
Unattended charging. If I even have to go out for 5 mins I unplug my charger and the charger is always within view when in use. I...
Is this it:
"The fire was as a result of components from different e-cigarettes being used together along with an incorrectly rated charger.
Fire chiefs advise only using the charger supplied with your kit, not to mix and match components from different e-cig manufacturers, and never over...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.