Search results

  1. Nurzrachit

    Post pictures of your working wick and coil setup

    Silver Dog. 30g Kanthal a1. 1.0 Ohm. MOV Blue Ridge 18mg=Pocket Monster!
  2. Nurzrachit

    Post pictures of your working wick and coil setup

    K-100 with Aga-t. 26g Kanthal 0.7 ohm's. Vz Real cig DIY 50/50 VG/PG 10mg=Awesomesauce.
  3. Nurzrachit

    Post pictures of your working wick and coil setup

    Cheebrid, Chee-Chee hybrid. 30G Kanthal a1, 1.0 Ohm with Voodoo kitty.
  4. Nurzrachit

    Post pictures of your working wick and coil setup

    Here's some genny's ZAPMAX 32g Kanthal a1. 1.6 ohm's at 8.5watts=Nice vape
  5. Nurzrachit

    Post pictures of your working wick and coil setup

    Igo-L with dual cotton wix. 32g Nichrome.
  6. Nurzrachit

    Post pictures of your working wick and coil setup

    One of my favorites. Twin coil Phoenix 28G Kanthal a1. 0.9 ohm resistance. Bored airholes.
  7. Nurzrachit

    Post pictures of your working wick and coil setup

    28g Kanthal a1 on Moddified hydra. 5 wraps.
  8. Nurzrachit

    Post pictures of your working wick and coil setup

    Believe it or not, this one worked pretty good too. It was a pyrex wick on the DUD, and steamed the vapor out. 28 G Kanthal a1, 7 wraps.
  9. Nurzrachit

    Post pictures of your working wick and coil setup

    Okay that "anaconda" is creepy lookin. Reminds me of a bent rat turd all greasy and such. Just bustin on ya, I bet it vapes nice. Read the whole thread last night, I have a couple pics. Last year 5 Wrap 33G Kanthal. 13 wraps 30G Nichrome, actually worked pretty good. I think it was...
  10. Nurzrachit

    IGO-L... In awe

    Make a new hole.:D
  11. Nurzrachit

    Phoenix: Still a viable Cloud monster.

    I am gonna go 26g kanthal in the morning.
  12. Nurzrachit

    Phoenix: Still a viable Cloud monster.

    You will get used to the open draw. I take sharp fast tugs for a smooth hit. Long slow pulls for increased throat hit. Direct lung hits for massive vapor, but watch out for the nic buzz. I lowered mine to about 8 mg for strait lung draws.
  13. Nurzrachit

    Phoenix: Still a viable Cloud monster.

    I may have to try it with a ss mesh then. do you use a vertical or horizontal coil?
  14. Nurzrachit

    Phoenix: Still a viable Cloud monster.

    I use a small screwdriver. I do not know what the size of the shaft is. It is the same one I use to tighten the screws, like a jewelers screwdriver. I think they do provide good flavor dHomes, seems better than Igo-L. I too prefer Genesis overall for convienence, but these are fun to play...
  15. Nurzrachit

    IGO-L... In awe

    You could use that as a flashlight!
  16. Nurzrachit

    Zatty pro rust?

    Take the top oring off, slowly and gently twist the quartz tank off after draining the pluid. Take some dawn liquid and scrub a dub that sucker. Reinstall, admire your work whilst enjoying a supreme vape.
  17. Nurzrachit

    Cheebrid made easy

    You could say that. Bring the pipe pics as well!
  18. Nurzrachit

    IGO-L... In awe

    Okay got ahold of the Igo-L today. In it's stock form, the build quality is nice. I set it up with a 28g Kanthal a-1,7 coil wrap with Silica wick. Came out to 1 ohm, and I used it for about 5 minutes. Out of the box may be good for some, but I found the throat hit irritating and Vapor...
  19. Nurzrachit

    Cheebrid made easy

    Dude, that sounds BA! Make sure you snap up some shots, and postem up!
  20. Nurzrachit

    Zatty pro rust?

    That is probably just the appearance of the oxidized wick. If you really think it is deteriorating, replace that shiz.
Top Bottom
Forums
Products
Vaping.com
Star Suppliers
Blogs
Menu