Search results

  1. Treeburner1983

    New Kangxin 50W TC device - Mini VF KX-50D: single 18650; LED torch; USB charge; multiple colours

    Since the green no longer lists pre-order but says 2-7 days I figured it was safe to email Focalecig and see what's up with the shipping status - hopefully they don't pull a VapeNW and tell me it will ship when they receive them! -Treeburner
  2. Treeburner1983

    Goliath by Youde

    Put some dual 28g nickel coils in my Goliath last night, 10 wrap 2.5mm id for 0.078ohm on my ipv4 and it's vaping like a dream with 90% VG juice! Easily going through 1ml/hr with the juice control wide open, but the clouds and flavor are worth having to refill once in a while. I've never had a...
  3. Treeburner1983

    Nickel Builds on RTA's.....

    Built up the Goliath RTA last night with dual 28g coils, 10 wraps each 2.5mm id coming out to 0.078ohm total. It was a little tough fitting the chimney over such long coils, but after raising the coils and bringing them nearer the posts, the chimney just fit. 40J at 420°F gives a superb vape...
  4. Treeburner1983

    Pioneer4You IPV3 Li 165W / 200W With Temperature Control (Yihi SX330-V3SL )

    Expected to be in stock in late May? Judging by the ipv4 fiasco I doubt anyone will see the upgraded ipv3 until at least Christmas 2016. -Treeburner
  5. Treeburner1983

    Ipv 4

    To switch to temperature control, hit the fire button five times, switch to "Joule" mode, set your temperature, then hold the up and down buttons at the same time to set the base resistance. Once that's all set you're ready to vape with TC (assuming you have a tank with a nickel or titanium...
  6. Treeburner1983

    Temperature Control -- Worth the Hype or a Gimmick?

    Temperature control provides a very consistent vape. Once you are up to the set temperature and the wattage starts being throttled back, you notice the difference from a normal coil which gets hotter and hotter the longer you fire it. While I was waiting for my VF clones and ipv4 I kept...
  7. Treeburner1983

    Nickel Builds on RTA's.....

    Love my Lemo 2 for nickel builds, and I'm having no problem using the post holes as long as I reinforce the trapped leads with stainless steel wire through the post hole as well. Most recently using twisted 28g nickel w/ 32g kanthal and that secures through the post holes without a problem as...
  8. Treeburner1983

    Changing Tanks Using Same Mod

    Unless the mod is warm enough to heat the new nickel coil without firing, then the temperature of the mod shouldn't affect the temperature control. The temperature of the coil, however, does, and if you put a warm coil on as a new coil the temperature control will be off. -Treeburner
  9. Treeburner1983

    Who makes the best Vapor Flask v3 clone as of now?

    I own two Waidea VF V3 clones, one black and one silver, and have held the Kangxin unit, and I can easily say the Waidea is the better unit and you can't go wrong with this mod! The build quality is amazing for the price point, it looks great, fits the hand nicely, and TC works amazingly well...
  10. Treeburner1983

    Max VG Coffee E-Juice

    Any suggestions for a good max vg coffee flavored juice? I usually DIY but bored of my usual blends so looking to try some different vendors, ordered Velvet Cloud Night Shift and Mewlew's Magic and ITCvapes Mach 10 and Berserker (and a bunch of others), but can anyone recommend any other max vg...
  11. Treeburner1983

    RDA Freakshow Mini (Project Sub Ohm)

    My fiancée bought me a Freakshow Mini as a random gift, what an awesome woman I have! I didn't like the Magma (not enough airflow) which I had bought to go on my black Vaporflask clone, so the black Freakshow Mini was a welcome surprise! Threw a 26g 12 wrap 2.5mm id single coil in, and...
  12. Treeburner1983

    Vapor Flask V3 DNA40 Clone thread

    Same with my Silver, the black shows every little spot though. However, it still looks great and functions perfectly! -Treeburner
  13. Treeburner1983

    IPV4 preorder

    You are correct, the temperature control is installed and works well. -Treeburner
  14. Treeburner1983

    IPV4 preorder

    My ipv4 from wakeandvape arrived today, and works perfectly! Looks better than in pictures, and the vape sock is a nice little bonus. Thanks wakeandvape, hope to do business with you again! -Treeburner
  15. Treeburner1983

    Vapor Flask V3 DNA40 Clone thread

    My black flask came today, and not only does it work just as flawlessly as the silver it looks incredible other than being a fingerprint magnet. Also, my only atty which wouldn't make contact with my silver flask, a Tobeco Magma Clone, sits perfectly on the black. My Magma is black and was...
  16. Treeburner1983

    Vapor Flask V3 DNA40 Clone thread

    This sounds like your best bet, assuming the pair was already married previously before going into the flask. Enjoy! -Treeburner
  17. Treeburner1983

    Vapor Flask V3 DNA40 Clone thread

    My black Waidea VF V3 from 3Fvape is finally being delivered today! Been loving the silver with my Lemo 2 but it will be nice to have another TC mod to play with (in addition to my ipv4 which should be here tomorrow). -Treeburner
  18. Treeburner1983

    IPV4 preorder

    When a pre-ordered item doesn't arrive by the estimated date, I feel it's the vendor's responsibility, regardless of the manufacturer's shortfalls or anything else, to inform those who have ordered about the status of their order and when the new estimated arrival date is. If the vendor can't...
  19. Treeburner1983

    IPV4 preorder

    Had the opportunity to deal with wakeandvape's customer service, and I've got to say I was pleasantly surprised. Ashley responded to my inquiry quickly, and despite it being a crazy day shipping 200+ units she was able to quickly answer my question and resolve the issue I had. I'm extremely...
  20. Treeburner1983

    IPV4 preorder

    I didn't even bother asking them to send the silver, since they didn't offer and they refused you I figured I might as well jump on the cheaper price at wakeandvape. By the time the black is finally out and available my fiancée should be ready for a TC mod, at which point I'll pass the silver...
Top Bottom
Forums
Products
Vaping.com
Star Suppliers
Blogs
Menu