Search results

  1. Scubabatdan

    The Next Big thing.... Porous Ceramic Wicks

    Hey Ted, I drilled out my top hole to 1/8" could go larger say 9/64", But I did a 1/8" wick with .8ohms using 28ga kanthal and it is wicking beautifully on a mech mod. Dan
  2. Scubabatdan

    Ejuice calculator (added quantity calculations)

    Section 7 of the VG calculator like the PG page work off of VLookup, it pulls the information from the recipes page. Then it multiplies the percent pulled by the amount of flavor in section 2 I.E. Peach Flavor 42.68% * 1ml = 0.43ml Drops are calculated by multiplying the ml from above by the...
  3. Scubabatdan

    I thought Oils werent safe to vape?

    Glycerin is derived from vegetable fats (oils) and or animal fats, derived does not mean it is vegetable oil, its chemical composition is changed. Vegetable oils such a peanut, corn, kanola etc are used to dilute and carry the essential oils. Many manufactures do this to cut cost and improve...
  4. Scubabatdan

    Sugru?

    Should work I, there are a lot of silicone seals in attys like the RSST, CHID, AGA etc on the post seal. So no reason why it would not work provided you don't get too close to the coil. Dan
  5. Scubabatdan

    I thought Oils werent safe to vape?

    Thanks Hoosier. yep he is correct. That list only applies to essential oils. All of the TPA flavors are artificial flavor for the most part. Dan
  6. Scubabatdan

    Ejuice calculator (added quantity calculations)

    A question that was asked and I thought I would share the answer... When adding a flavor, right click on the numbers to the left and "insert" a row, then add the flavor you want. This will automatically adjust the names manager for that flavor. You can't insert on the last flavor, or the first...
  7. Scubabatdan

    Sugru?

    Mix 100% silicone and cornstarch, 1:1 will setup in <30min. Can make molds or plugs etc. The cornstarch oxygenates the silicone from the inside out, made a mold of a wakeboard fin that was crushed and repaired it this way. Can be used for all sorts of things. Have not tried it with high temps...
  8. Scubabatdan

    The Next Big thing.... Porous Ceramic Wicks

    LOL Hey I am a star in China!!! giggle, ah well imitation is the highest form of flattery. Dan
  9. Scubabatdan

    I thought Oils werent safe to vape?

    No problem, here is a list of oils to avoid.... •Almond (Bitter) - Prunus amygdalus var. amara ◦Prussic acid - also known as cyanide, is the main constituent of bitter almond oil, and even small amounts can be lethal. ◦Almond essence is made from this oil, but only after the prussic oil has...
  10. Scubabatdan

    I thought Oils werent safe to vape?

    Thanks, No problem, I get them all the time :) Dan
  11. Scubabatdan

    I thought Oils werent safe to vape?

    Hey everyone, I have addressed this issue before, but I guess I will again. I have been vaping for almost 4 years now and DIY for most of that, I have used essential oils and researched if oils are safe. After all they use them in aromatherapy shops like this one: Essential Oils : VapeNow...
  12. Scubabatdan

    The Next Big thing.... Porous Ceramic Wicks

    Ok good and bad news... Good News - Kerry got the wicks... Bad news - Dan, Sorry, but we have not had a chance to coat your tubes. We are down this week doing some maintenance on our machines. We hope to be able to coat your parts in the next 2 to 3 weeks. Regards, Kerry Goodsel President...
  13. Scubabatdan

    The Next Big thing.... Porous Ceramic Wicks

    Well if you thing about it, we are cutting the wicks out of the center of the air stones and they are wicking. If the center did not wick then it would not work. Same with the DB13's they are cut from the center of the stone. So I would have to say it is porous all the way through. No I have...
  14. Scubabatdan

    The Next Big thing.... Porous Ceramic Wicks

    The 510 to ego from provape.com Dan
  15. Scubabatdan

    The Next Big thing.... Porous Ceramic Wicks

    Unless it says channeled I would say old stock. Dan
  16. Scubabatdan

    The Next Big thing.... Porous Ceramic Wicks

    Correct but it was not feasible for mass production because the magnets had to be glued to the custom made washers and press fit. The problem is that the 1/8" washers would become crooked and not always fire, had to constantly rotate the battery to get it to fire. This setup solves that problem...
  17. Scubabatdan

    The Next Big thing.... Porous Ceramic Wicks

    YAY Vapemail from McMasters :) Look what I got... 20.3mm Silicone washers, perfect for the RSST pyrex tank conversion... Dan
  18. Scubabatdan

    The Next Big thing.... Porous Ceramic Wicks

    But it was not for a bottom fire button :D TeeHee Dan
  19. Scubabatdan

    The Next Big thing.... Porous Ceramic Wicks

    Good Idea but nope... LOL uhhh no.... Ding Ding Ding... Yes it is a magnetic switch assembly when all put together but more LOL The parts from shapeways hold the magnets in them and the holders interlock, so it can only go up and down, no spinning or cocking. I.E.: Dan
  20. Scubabatdan

    The Next Big thing.... Porous Ceramic Wicks

    Ahhhh very good, the shapeway parts do interlock (perfect design for what I envision). 2 per device BTW, but its not an atty quick disconnect device :) Quiet, because I have not heard anything yet :( The Aquarius can be used on this though :) Dan
Top Bottom
Forums
Products
Vaping.com
Star Suppliers
Blogs
Menu