Search results

  1. ddirtyvapes

    Eleaf iStick "pico"

    That makes sense :) I was just wondering. I'd go with "Belli" and "Criuses" myself! Also, I know what you mean. Well, most people who have been vaping a while probably know what you mean. But it never ceases to surprise me what a difference there can be with the same exact build in two...
  2. ddirtyvapes

    WISMEC Reuleaux RX200 TC

    But... but... April fools was only 5 weeks ago!
  3. ddirtyvapes

    WISMEC Reuleaux RX200 TC

    I'm really glad it's working better for you @andreidumitrescu! Just so you know for the future though, it does seem like you are wrapping lots of wraps... 7 with a Clapton and 10 on 2.5mm with 24g is definitely on the high side. It doesn't matter one bit as long as it is working for you...
  4. ddirtyvapes

    Eleaf iStick "pico"

    @KenD are you saying your cubis isn't working well in TC mode? What kind of coil are you using? I'm finding the Pico's TC to work as well or better than my other 2-3 batt, higher power TC devices, so maybe there's some fiddling you can do??
  5. ddirtyvapes

    Eleaf iStick "pico"

    Great thank you! The ECR is terrible (I have one) but thank you lol. That's great. Good thing the EC heads are pretty good too but I'd love to get some stock claptons... I was hoping the triton coils would fit. Thought someone said so a few pages back but couldn't find it.
  6. ddirtyvapes

    WISMEC Reuleaux RX200 TC

    @andreidumitrescu nothing looks inherently bad with that build, to me, but it is hard to say. It is hard to say what I would run that build at without actually vaping it, but chances are you can increase a few watts at a time and see what happens. Actually, if you are having an unsatisfying...
  7. ddirtyvapes

    WISMEC Reuleaux RX200 TC

    The RX cannot control kanthal temperature, so that was user error. If you were hitting TC immediately with SS, assuming you don't have a dud device, then that was user error, too. You may have been using the wrong grade of SS, had your settings wrong, or used the wrong TCR depending on which is...
  8. ddirtyvapes

    WISMEC Reuleaux RX200 TC

    I second @BillW50's thoughts. Plus if you go for SS you can use TC or power mode, should you so choose.
  9. ddirtyvapes

    WISMEC Reuleaux RX200 TC

    @atroph all is fine with the temp control... still don't really know why the vapes would be so different setting the same TCR for same material/same coil across the three devices, but changing the TCR on the RX helped so whatever. I was pretty certain it's not a dud only insofar as I've had it...
  10. ddirtyvapes

    Eleaf iStick "pico"

    No question!! Granted, for someone used to a 5mL tank and 1.5ohm coils (just for example), it might be a bit more of a pain/just seem like a lot of filling. However, it is about as easy as filling an RDA and certainly holds more and lasts longer between fills so for me it's nothing. I usually...
  11. ddirtyvapes

    Eleaf iStick "pico"

    I just think the Pico deserves a little more credit for its efficiency! I'm using VTC4s, which regardless of whether we call them 30A or 23-25A (Mooch), give a bit more room if you're going to use higher wattage. I didn't get the device to run it at 75W all the time (or ever, really) either, but...
  12. ddirtyvapes

    Eleaf iStick "pico"

    BTW, if anyone saw my earlier post about my loose Melo 3 Mini AFC, I contacted VapeNW and they are sending me a new base even though they also had to send a replacement Griffin Deck from the same order because two of the screws on the original were wedged in completely. While there are a few...
  13. ddirtyvapes

    Eleaf iStick "pico"

    Sorry, I was unclear. Bypass doesn't seem that accurate firing to me. It's not at all a straight unregulated bypass... I couldn't get a .25 firing anywhere near the 68ishW it should be with a fully charged battery minus drop. It may very well be accurate enough in battery voltage display. I...
  14. ddirtyvapes

    Eleaf iStick "pico"

    @TrollDragon My previous post was not a suggestion of where to run your mod or what to put on it; I merely said you are capable of safely attaching any topper that will fire on the Pico using a 20A battery, regardless of its resistance, if you stay at or below 56W using the regulated mod amp...
  15. ddirtyvapes

    Eleaf iStick "pico"

    But you could put the Moonshot on there if you didn't exceed 60W (or more like 56W, accounting for headroom). Whether or not that would be a satisfying vape is besides the point, which is that the resistance has no bearing in this particular safety equation. This is distinct from saying it...
  16. ddirtyvapes

    Eleaf iStick "pico"

    Sorry, yes, it was the kit with the Melo 3 Mini and not the Melo 3. My tank is 2mL. Easy enough to fill though.
  17. ddirtyvapes

    Eleaf iStick "pico"

    You mean you're worried about the cap and leaking as separate issues, or you're worried about leakage getting into the battery compartment/making the cap sticky? the connection is very tight. I don't think that will be an issue, even with leakage. I have many other devices that are in worse...
  18. ddirtyvapes

    Eleaf iStick "pico"

    There must be, but I don't know what it would be... I've got to imagine there's some kind of protective coating you can put on the steel parts. How long before yours started doing that? I am MUCH less concerned about the aesthetics than making sure the battery cover has no trouble going on and...
  19. ddirtyvapes

    Eleaf iStick "pico"

    ^ :hubba:
  20. ddirtyvapes

    Eleaf iStick "pico"

    I've never owned a white mod but I'd be worried about dirt, personally. It is nice looking though. Really they all are, even the hot pink. It's just a good looking mod IMO. The Kayfun v4 may have some trouble, as it expands to 23mm with the SS or Glass tank... but i think that will be above...
Top Bottom
Forums
Products
Vaping.com
Star Suppliers
Blogs
Menu