Search results

  1. xtwosm0kesx

    Used to vape bobas, went a year without, just found bottle; MISS BOBAS

    Uhh maybe you missed it but something has definitely changed, so much so they pulled Bobas and GJ altogether a couple weeks ago.
  2. xtwosm0kesx

    Lavabox DNA200 looking nice!!

    Have you guys checked the screen brightness settings in escribe to see if they have been set below 100%? Appears the screen cover on the LB is 'smoked' so that has to dim it a bit, but without a cover and set to 100% brightness the screen is extremely bright, like almost flashlight level.
  3. xtwosm0kesx

    A case of vaping induced popcorn lung has been claimed

    “No sympathy for the devil; keep that in mind. Buy the ticket, take the ride...and if it occasionally gets a little heavier than what you had in mind, well...maybe chalk it off to forced conscious expansion: Tune in, freak out, get beaten.” -Hunter S. Thompson
  4. xtwosm0kesx

    Boxer Mod 200W with Evolv DNA200 Temperature Control

    Ahh, i thought that they were inferring the chip itself was somehow produced lopsided, which is VERY unlikely. After reading the DIY info/looking at the picture they mention the screen is held to the 'screen holder' via tape or silicone then that must be attached to the board/enclosure via the...
  5. xtwosm0kesx

    Boxer Mod 200W with Evolv DNA200 Temperature Control

    I'd be willing to bet the issue has nothing to do with the board itself and is due to hasty assembly. Don't even know how/if it'd be possible for a board to be 'lopsided' in a way that effected screen mounting since the screen is on a flexible ribbon. Hopefully Ginger will make it right...
  6. xtwosm0kesx

    Provari Radius

  7. xtwosm0kesx

    100k!

    If there was ever something that deserved some clap gif spam. WELL DONE!
  8. xtwosm0kesx

    SMY SDNA 200 (evolv DNA200)

    Was just thinking the same thing, thats definitely not what the display looks like on my 200/any other 200 i've seen. So either they didn't have their hands a board and shopped it or they're lying about it being an Evolv board.
  9. xtwosm0kesx

    DNA 200 not even close.......

    LOL So if its been nothing but headaches for over a month why were you so stoked just 10 days ago (last post was on the 26th and doesn't seem too angry)?
  10. xtwosm0kesx

    DNA 40 with battery tube question

    Looking at the pictures of the tube, and assuming you want to keep the bottom cap able to unscrew for easy battery access, i would say the only option is to solder the negative to the outside of the tube itself, though to do so is going to require a decent amount of heat. You may be able to get...
  11. xtwosm0kesx

    Fast Tech package tracking? Feedback?

    Just click on the big blue box and enter the tracking #, it should find it (if theres record of it).
  12. xtwosm0kesx

    18650 Batteries and (lack of) DNA200 'autofire' prevention (or 'Is Mooch a sissy')

    Assuming i'm thinking about this correctly and given the max amps the board will EVER pull from the battery is ~23a, i dont think you have much to worry about regarding heat issues. Using the curve of Ni200 as an example (resistance increases rapidly up to a certain point as power is applied...
  13. xtwosm0kesx

    Official ProVari Radius Thread

    That's just ridiculous. Like they say, you can't fix stupid and anyone who takes pleasure in wasting the time of people who risk their lives trying to protect/save ours, is most certainly an idiot. For some reason when i read this my brain immediately went here: Seems we're pretty much on the...
  14. xtwosm0kesx

    Issue with new HCigar DNA 200

    Sigh, some of you guys just can't help yourselves can you... The first thing i would do is hook the 200 up to escribe, navigate to the "Mod" tab and make sure that the watt hours are set to the correct number for your battery. For the 1300mah battery in your mod the watt hours should be set to...
  15. xtwosm0kesx

    Official ProVari Radius Thread

    So, it's fair to say that by 2011 standards you were pushing the envelope and could have been considered a "cloud chaser" (again by a 2011 standard)? I realize my response sounded snippy, i should have worded it better because i do have a GREAT deal of respect for you/what you've done for the...
  16. xtwosm0kesx

    DNA 200 Watt

    There's a "Reset Statistics" button on the lower right hand side in the 'Device Monitor' tab.
  17. xtwosm0kesx

    Official ProVari Radius Thread

    Did i miss something? When did gennies become simple 'plug and play' devices requiring no build ability and no knowledge of the numbers? Back on topic, definitely interested to see what Provape has up their sleeve, always had a great deal of respect for the company, but they have been lagging...
  18. xtwosm0kesx

    Fast Tech package tracking? Feedback?

    I used 17track.net to track orders when i was still ordering from FT regularly, it usually gave me more info than USPS etc.
  19. xtwosm0kesx

    Feel Wary About eBaying an Subox Mini for low $60s from China.

    $57 shipped from Vape Super Saver (US based, reliable, ships pretty fast) http://www.vapesupersaver.com/subox-mini-starter-kit-56-99-with-free-shipping/
  20. xtwosm0kesx

    gearbest mod

    I assume they mean that if a member posts a contest THAT MEMBER must be the person giving away the item, and not on behalf of a vendor/Gearbest, which they possibly consider as advertising a giveaway for an unregistered supplier. The way its currently worded makes it confusing as to who exactly...
Top Bottom
Forums
Products
Vaping.com
Star Suppliers
Blogs
Menu