Search results

  1. TrollDragon

    smok mag p3 trouble

    Impossible on a factory made Smok Mesh Coil... We sell a ton of Mesh and Max Mesh coil heads for the Prince tank and they have absolutely no problem wicking 80% VG and higher juice. What are you using for juice?
  2. TrollDragon

    Evolv-ing Thread

    For the ceramic cCells... :D
  3. TrollDragon

    Shinyitis Support Group

    I use a spin trap in the building for any tenant that gets a mouse, they are all self contained and you just throw the trap and its contents out. More expensive than jaw traps but much easier on the feelings. ;)
  4. TrollDragon

    groin/thigh pain from vape

    :pop:
  5. TrollDragon

    Aspire Breeze Auto firing..

    Good that you figured it out, but it's a three year old device and the auto draw was poorly implemented... The Breeze NXT is leaps and bounds better than the OG Breeze and Breeze 2 IMHO.
  6. TrollDragon

    Axial pro dual deck

    A series deck on a 3S or higher PWM mod is a perfect pairing.
  7. TrollDragon

    Shinyitis Support Group

    Have fun, it can take quite a bit of tinkering to find a coil you like on a mech. I'm still searching for a single coil/cell build that I actually like. Just play safe, as you now have two batteries that can get nasty quickly instead of one if something goes south.
  8. TrollDragon

    Shinyitis Support Group

    Nice mod, I was going to ask if you've ever used a stacked mod before? You do realize that it would require a 1.2 ohm coil for a 60W type of vape, which would be hard to do on a dual coil regular deck RDA. They do make a few RDAs with a neutral center post (series deck) which allows the two...
  9. TrollDragon

    Hooray steam crave's mesh deck

    Dry hits on a mesh coil are brutal, you'll experience one at some point. Think of the worst dry hit you've ever had and multiply that by 10. I'm not saying this to dissuade or frighten you, just something you should be aware of. ;) Mesh coils glow instantly when dry, so use lots of wick. Make...
  10. TrollDragon

    TC-TCR Temperature Control TCR Value Solution for Different Coils/Mods

    Wow, that's a lot of work to try and "perfect" a TC vape... Power to you though. The first thing I would do is get away from the Stainless Steel wire which can vary in composition from manufacture to manufacturer and even batch to batch. You might consider going with Titanium Grade 1 as that...
  11. TrollDragon

    Mod not working why?

    His post in the other thread had a no mosfet and a 2A switch between the battery and 510...
  12. TrollDragon

    Mod not working why?

    If it's the same box from his other post, it's 3D printed.
  13. TrollDragon

    Mod not working why?

    The N Channel mosfet used in that circuit switches the negative wire. The positive from the battery goes directly to the 510 post and a secondary wire to pull the gate high. Think of the Mosfet as a relay, with the negative side of the circuit going through the contacts. The positive wire tap...
  14. TrollDragon

    Mod not working why?

    The resistor makes sure that the mosfet turns off since the gate is left floating once you release the switch.
  15. TrollDragon

    Mod not working why?

    It's the wiring for an N Channel Mosfet, what doesn't appear correct?
  16. TrollDragon

    Mod not working why?

    Well... judging from your other posts you have a lack of electronic knowledge. So I would suggest you might be better off with a commercial mod instead of something DIY and dangerous.
  17. TrollDragon

    Mod not working why?

    Providing your wiring is correct, all solder joints are good and the switch actually works I would guess you have a faulty mosfet. Did you buy it from a supplier like Digikey or Mouser? There are a lot of defective and fake components floating around eBay that people will sell. Also what...
  18. TrollDragon

    Evolv-ing Thread

    Flo would be proud! ;)
  19. TrollDragon

    Shinyitis Support Group

    No hot spots to work out and supposedly more flavor. All they do is pop and spatter hot juice for me. ;)
  20. TrollDragon

    Shinyitis Support Group

    That's why they make quarantine, sucks for the crew member but better safe than sorry.
Top Bottom
Forums
Products
Vaping.com
Star Suppliers
Blogs
Menu