Search results

  1. Akya2120

    Sigelei Mechnical Mods

    Is there anyone who is certain the switch replacement from atmizoo will work fine with the 20? I have heard it works, and then I have heard it will need to be modded... I just want to know what I am getting into before buying the setup. Thanks guys!
  2. Akya2120

    Sigelei Mechnical Mods

    Does the 510 connection part fit as well? I really prefer that flush fit look.
  3. Akya2120

    Sigelei Mechnical Mods

    I haven't been following this very closely... Can the roller internals be installed in my 20?
  4. Akya2120

    Curiosity about Kanthal

    Did some reading. So, aluminum does not release gasses until it is vaporized. If you are trying to vaporize your coil, you've got bigger issues and a strong craving for throat hit. Haha. Although many chefs are staying away from aluminum cookware because acidic or basic foods can cause aluminum...
  5. Akya2120

    I'm trying to get into DIY juice

    I am trying to get into DIY and I want to use natural flavors rather than artificial flavors. Are there any vendors that have natural flavors or do I have to extract them myself? Also, pretty much how this works is mix your desired amount of flavors into a base liquid and get it all to the...
  6. Akya2120

    Curiosity about Kanthal

    Kanthal is made with aluminum. Hasn't heating aluminum been related to Alzheimer's? Not trying to worry people or anything it might very well not work that way.
  7. Akya2120

    The Next Big thing.... Porous Ceramic Wicks

    Making a mold wouldn't be that hard. Do we know what type of clay/ceramic is to be used? I haven't worked with anything porous. Is there an ideal porosity for this, or is it the more the better? If I can find the right clay I will make them.
  8. Akya2120

    The Next Big thing.... Porous Ceramic Wicks

    I apologize if this has already been asked. I've already searched and I'm not reading 100 pages to find it haha. What kind of porous ceramic are you guys using and where are you buying it? I see that you guys are having some trouble grinding it down to specification on your devices. Has anyone...
  9. Akya2120

    500x3500 stainless steel mesh

    Well judging by this company's 200x1400 the wire gauge is larger for both directions of weave than 400x400. Straight from their sight, 200 x 1400 Warp=.0028 Weft=.0016 The reason you probably haven't heard back from who ever got the sample is because it probably didn't work as well...
  10. Akya2120

    500x3500 stainless steel mesh

    200x1400 seems like it wouldn't work as well as 400x400. The 200 count wires would be heavier gauge. I read someone's post who tested the 325, 400, and 500 count mesh using them as kerosine lamps. The results were that the flame got larger as the mesh count got higher. I was assuming this is due...
  11. Akya2120

    500x3500 stainless steel mesh

    Found this looking for #500 mesh. Micronic Filtration - Twill Dutch Weave Filter Cloth Just wondering if anyone has seen or tried it. No "about us" page so I don't know where they are located but the phone number is a Washington state number. I would think the wicking capability of this would...
  12. Akya2120

    Made my own genesis. I need a little help though.

    It looks like the hole for the wick is huge in the line. Much bigger than the 2mm hole I am using. I did try moving the negative terminal up but got about the same results. I am loosing a lot of flavor somewhere. I will get one good drag and the flavor will be there and then the rest are kinda...
  13. Akya2120

    Made my own genesis. I need a little help though.

    I thought the hollow core of the wick was to allow air into the system and it didn't need another hole. Also I thought the hole made it act kind of like a straw so on draw a little would come up every time I draw. It is vaping alright, the clouds are a little lighter than what I normally get...
  14. Akya2120

    Made my own genesis. I need a little help though.

    Well I followed your instruction on the oxidizing. It's holding a steady resistance. I moved the coil up and covered the upper hole. It's about the same vapor either way just a bit stiffer draw with one closed. I'm getting a harsh almost dusty flavor from it. I have been getting it the whole...
  15. Akya2120

    Made my own genesis. I need a little help though.

    Here are the pics I took a picture of the bottom where I will fill it once I get a syringe. Also should I cut an angle at the base of my wick? Sorry they are sideways... They didn't show up that way until I posted them.
  16. Akya2120

    Made my own genesis. I need a little help though.

    Yes the body is single tube. I drilled two 57 gauge holes. I had another stainless steel threaded rod but I damaged it attempting to press fit it into the body. Got the second one in fine that's the negative post. I'll take a close up of the air holes and post it in a minute. Maybe I news to...
  17. Akya2120

    Made my own genesis. I need a little help though.

    So here are the pictures It looks like the holes are drilled in the right spot. I oxidized the wick with a jet lighter three times, got it red hot and squelched it. Then I put e liquid on it 2 times and burned it off. I would prefer to be using 400 mesh but I can't find it. How high above...
  18. Akya2120

    Made my own genesis. I need a little help though.

    Hey everyone, so I finally made a genesis. Problem is I can't get it to perform like other genesis atomizers I have seen. Not to mention the extreme throat hit. I am using .2mm kanthal and 325 mesh. I tried 3 wraps and got about .9 ohms right now with six full wraps I am getting about 2.4 ohms...
  19. Akya2120

    Mark-T Infinity Atomizer

    I want one. It looks very nice! I think this will look good on the provari as well.
  20. Akya2120

    Idea for hybrid atomizers

    Yeah. I did it today with an older LR I had because I didn't want to ruin a good new atomizer. Now I wish I had done it with a fresh atty haha. It works great. I had to tinker with the flow hole a bit but it works nicely. Other than filling it and fitting it. I took 2 sink grommets and a piece...
Top Bottom
Forums
Products
Vaping.com
Star Suppliers
Blogs
Menu