Search results

  1. tara81

    Smjy doggystyle rta - is this right?

    Also, when the chamber is leaking, I tend to shake my naut minis with tissue over the top of the vape tank. Is it safe to do that with an rta with 28 gauge single wire, or will I shake the coil around too much to cause it to move?
  2. tara81

    Smjy doggystyle rta - is this right?

    I did it! I was so nervous but I did it. I dry burned and wicked them. I filled up two doggystyle sjmy clones and two vandy vape berserkers. Is it okay to store the tanks sideways in a case? Or do I have to keep them upright so the coil doesn't move ? The berserker looks so good with my tarot...
  3. tara81

    Smjy doggystyle rta - is this right?

    So I attempted to dry burn the doggystyle coil in my mod and it didn't light up, 2.0 mm 1.5 ohms , my mod said volts were 3.8. I first tried at 5 watts then at 7 watts. How high do you dry burn coils at 1.4-1.8 ohms for hotspots? I am using kanthal wire. Am I supposed to dry burn to check for...
  4. tara81

    Unit getting very hot

    the tarot nano lasts longer then the revenger mini for battery power (no idea why they both have the same size battery - but the revenger mini has a light up system )
  5. tara81

    Smjy doggystyle rta - is this right?

    Okay, so , I attempted this again. Do these look good? Vandy vape berserker mini, tank #1 Same tank. Vandy vape mini , tank #2 Doggystyle clone, sjmy, 28 gauge 9 wraps 2.0 mm , ( i read in the video comments it performs better as 2.0 mm dia , and i felt it looked safer too )
  6. tara81

    Smjy doggystyle rta - is this right?

    I see Thank you so much for explaining that to me ! Yeah the first photo I just thought the opposite side was touching and in danger, moreso then the other side, but I do understand you put it as an example, which did relieve my worries about my coil building being too close to the screw(posts)...
  7. tara81

    Smjy doggystyle rta - is this right?

    Thank you everyone for your support and advice ! In your first photo, I don't see what is wrong if the wire is not touching the bottom of the base on the side the yellow block and arrow is, on the other side it is though .. and the base looks like it's made of wood, Sorry I just don't...
  8. tara81

    Smjy doggystyle rta - is this right?

    Yeah I got so frustrated I tried and tried for like 4 hours and gave up lol. Maybe tomorrow I'll try again! So strange the ohm reader doesnt read the berserker mini properly if that is the case. I was too scared to put it in my mod to check , what if I misfire instead of turning it off , as it...
  9. tara81

    Smjy doggystyle rta - is this right?

    ThNk you, this is very informative. What is a bell? So i have no idea how to make this work. I thought this would be easy :( i tried the vandy vape berserker mini rta and my ohm meter keeps saying 0.02 ohms. Its wrong because its supposed to be 0.7 ohms clapton coil, I tightened it as much as i...
  10. tara81

    Smjy doggystyle rta - is this right?

    Great i cannot even open up the vandy vape tank. Sigh.
  11. tara81

    Smjy doggystyle rta - is this right?

    Oh god i hope vandy vape mini berserker is easier then this. I didnt know these were so hard to do, people said wicking was the hardest :(
  12. tara81

    Smjy doggystyle rta - is this right?

    After about 10 more attempts and 2 hours wasted altogether, does this look right? Kanthal 28 gauge 9 wraps 1.64 ohms on meter Can anyone answer my questions: If the coil legs touch the screw post on the top does it matter? If the coil touches the screw does it matter? If the coil legs come...
  13. tara81

    Smjy doggystyle rta - is this right?

    Omg this is so frustrating. I just dont get it, i cannot for the life of me put a coil on this tank. Thhis video isnt even in english
  14. tara81

    ignore lag double post

    Trying to delete .. double posted due to lag
    • tara81
    • Thread
    • right rta
    • Replies: 3
    • Forum: RTA
  15. tara81

    Smjy doggystyle rta - is this right?

    Also, what happens if your coil somehow touches the screw while firing?
  16. tara81

    Smjy doggystyle rta - is this right?

    can someone please tell me if my coil is screwed on the dogystyle rta base properly? 10 wraps 28 g 1.8 ohm coil 2.5 diameter. It shows 1.99 ohm on the ohm meter and 1.89 ohm on my mod. I might have made too many wraps its hard to count they are so tiny. Ive never made coils or used an rta...
    • tara81
    • Thread
    • right rta
    • Replies: 43
    • Forum: RTA
  17. tara81

    How long do CCELL coils really last?

    I’ve read ceramic coils are dangerous as you can inhale particles from them. Uwell ( a vape company ) did a study and explained why they dont make them.
  18. tara81

    Best Cigalike

    While their batteries are $20 a piece and their clearomizers are roughly $5 each, they do last a long time and are probably the best cigalike i have tried.
  19. tara81

    Best Cigalike

    i dont see the fusion tanks for mig cig 21 on aspire website
  20. tara81

    Best Cigalike

    Why wouldn’t the 4.2 volts matter on a 1.8 ohm clearomizer?
Top Bottom
Forums
Products
Vaping.com
Star Suppliers
Blogs
Menu