Search results

  1. L7D4N

    Official: Vaperfexion {VPX} Store Thread - High Quality Tanks and Vaping Gear

    Hey Cuse, I shot you a message on your site, but didn't realize you were a Registered Supplier on here, so I'm even more excited :D Does the Pro-V2 XL accept the Smoktech flanged cartos, and does it cause an additional height in where the bottom of the skirt is lifted from where it would...
  2. L7D4N

    Wick materials. Safe vs dangerous.

    Yeah, here's the ribbon/flat kanthal wire that's all the rave right now: Kanthal D Ribbon Resistance Heating Flat Wire 0 8 0 1mm 031 004" | eBay You can get the nichrome ribbon/flat wire here in the states on eBay as well, but I prefer kanthal due to the better taste. Everyone has been going...
  3. L7D4N

    Wick materials. Safe vs dangerous.

    Now there's a "Long time no see" post :D Don't worry, I've been absent in here too. I acquired a Terminator but just can't get it to work consistently, and believe it or not, my carto tanks and Smoktech single-coil 3ohm cartos have been doing me very well lately. I just got the 2MM lovepedal...
  4. L7D4N

    Question about order processing time

    I think John had some personal stuff happen over the weekend, but I would recommend using the contact link on his site to get in touch with him and inquire about your order. He also has an active phone number on there too if you want to call: Contact Us
  5. L7D4N

    Voltmeter in a 5ml tank

    If anyone is interested in purchasing these meters pre-built and ready to use, I've been putting these in the 2x18650 battery cases, using one side for the meter and the other for the battery slot, to test voltages of my batteries on the go. Here's the link for the volt meters: LED Panel Meter...
  6. L7D4N

    Silica Wick 3 mm - temperature resistance > 1000°C

    I've heard a lot of good things about your wick and just purchased a meter to try it out. I'm looking forward to using this in an Oddy. Thanks man!
  7. L7D4N

    Atmistique mod's accessories and more

    Is there an ETA on when your US Vendor(s) will have these available for sale? They've been out of stock for about three weeks now and I've been unable to try the Hippo Top Cap out. Thanks!
  8. L7D4N

    Vivi Nova 28g oval coil 1mm hemp wick

    Then I know what I'll be doing when I get home :D With me being at work, I didn't have access to the capability of boiling it, but I'll report back once its been boiled and setup tonight. Thanks BJ!
  9. L7D4N

    Vivi Nova 28g oval coil 1mm hemp wick

    Yeah, I used the lovepedal 1mm hemp, it was not boiled, 70PG/30VG, and the ends are just slightly unraveled. It's actually tasting pretty good now after a couple of hours, but I have to leave the juice control at least 4 full turns open for it to wick. This is also my first day with the...
  10. L7D4N

    Vivi Nova 28g oval coil 1mm hemp wick

    I loaded up my hemp in the Terminator today, used two strands through a premade 3.0ohm coil from SmartVapes, but it's not wicking too well. I'm going to spend the day attempting to break it in, and the juice control is almost wide open. I used 1 strand down the channels, and the second I cut at...
  11. L7D4N

    Wick materials. Safe vs dangerous.

    Gotcha, I just didn't know if by some weird way, gravity would play a role in forcing all the liquid down to the lower wick, causing burning on the top one or not. Thanks!
  12. L7D4N

    cgr 18650 replacement ?

    You'll want to refrain from using ICR's (NCR18650A you linked) as the protection circuit included on the negative side of the battery could potentially trip in high-current situations. For example, the ProVari V2/V2.5 has a 3.5amp limit, so the battery could potentially trip before ever reaching...
  13. L7D4N

    Wick materials. Safe vs dangerous.

    Thanks for the link BJ. Out of curiosity, when using the oval coil, is the oval sitting in the Nova head vertically, or horizontally? I plan on using the hemp I purchased in a Terminator, and would like to replicate your configuration within it. Thanks man!
  14. L7D4N

    Found a SS VAMO from US supplier

    BTW, if this assists anyone, the ProVari thread die matches the VAMO. I have a spare regular end cap from one of the ProVari's I gave away last year, and it threaded onto the female end of the bottom tube perfectly. Believe it or not, it even matches the diameter of the VAMO as well. Now if...
  15. L7D4N

    Found a SS VAMO from US supplier

    I received mine from VaporBank today, and the bottom cap threads onto the middle tube. Granted it feels a little less precise as the bottom tube in regards to how well the cap threads on, but a little noalox and 5min of turning it back and forth fixed all that right up. I haven't used a V1...
  16. L7D4N

    Lots of Vapor - you get what you pay for

    I'd recommend vixen vapors. They're local to me, but ship same-day if you order before noon, and have awesome juice with fair prices. Try out Tigers Blood and Fuzzy Berry, and you'll start buying 30ml+ batches, I guarantee it.
  17. L7D4N

    Vivi Nova Rebuild tutorial

    I believe in 2.5+ they used NR wires for the leads connected by the gasket, so there should be no further burning. I haven't purchased a new head in the last 6 months or so, and I can't say for certain though. If you look at the top of the coil and notice different colored or bigger wires that...
  18. L7D4N

    VAMO no longer working with 18650 or single 18350?

    QFT, I avoid DFWVapor like the plague. Their prices on everything is astounding. If you ever meander over to the Arlington area, try out Vixen Vapors for juice. I know the owner personally and while he doesn't stock much APV stuff, his juices are awesome and decently priced. Fuzzy Berry and...
  19. L7D4N

    Painting Ecig question

    If you have the 510-N Torpedo by Bauway, I would recommend not painting it. This was my very first mod, and I purchased it September of 2011. Shortly after, the Chrome plating started to tarnish, and I decided I would take Plasti-Dip to it, since it was a "removable" paint and wouldn't be...
  20. L7D4N

    Found a SS VAMO from US supplier

    I ordered mine yesterday from VaporBank. I expect to receive it around Wednesday or Thursday, and the SS finish is what I was waiting for. I miss my Provari's, but I have a good feeling this will be a decent mod that I won't have to worry about.
Top Bottom
Forums
Products
Vaping.com
Star Suppliers
Blogs
Menu