Search results

  1. steved5600

    Nemesis mod not working

    Did your nemesis come with a kick ring? If so you need to remove that when your not using the fuse or a kick board. Use your multi meeter to make sure your getting voltage to the 510 connector. Being careful not to short out the 510 connector. Also on my neme you can move the fire swith in...
  2. steved5600

    Recommend me a RTA please!

    In order of what i like will recommend these #1 Aerotank, #2 Fogger v4, #3 the black edition kayfun light+. LOL the black edition is not the color black don't know where that name came from. Prose and cons. Aerotank uses a SS tank and the after market clear tanks are not very good. at least...
  3. steved5600

    E-Juice - The fluid color is changing over time ...What's going on?

    That is fairly common. Had some juice i made that went from a light amber/orange look to medium brown. Like xaiver said if it goes dark in the tank then the coil may need to be cleaned or replaced and i would do a good cleaning on the tank while i was at it. Can use alcohol or just soapy...
  4. steved5600

    looking to upgrade can i find anything like this??

    Oh on the mod I would go with a twist or maybe a Vamo. Vamo is bigger though. Just has more options on voltage/wattage selection and the fact that when the battery goes dead you change the battery with a spare rather than having to charge the whole thing or have a spare twist etc.
  5. steved5600

    looking to upgrade can i find anything like this??

    I would go Aerotank. It's a dual coil which gives you more selection on the vapor level. Protank's are limited to around 4-8 watts but an aerotank will do 4-15 watts with no burnt taste. Aerotanks also have a air flow adjustment. One other option which is new and i have not tried it yet is...
  6. steved5600

    Unexpected LATE Birthday gift. A longer life I hope.

    Well i thought my birthday gift was going to be a new KSD 30 ecig mod to replace a Vamo that is starting to give me trouble. It will be a bit late as it was a pre-order. It turned out to be a call i got from the doctors office today a day late. About 18 months ago i got a chest xray and...
  7. steved5600

    I call upon the Veterans for help

    Brass can have lead and zinc in it. Should use atty's that the inner part is Stainless steel. The air flow ring can be brass or copper but not the inside.
  8. steved5600

    Hana Modz V3 - Why is this error message coming up?

    Not with that error. Check atomizer is the one to watch out for. On the Chana mods there were some bad connectors causing problems. I got one with that problem. Saw what your talking about a few times but that was not my problem. Waiting on parts or i'd check if mine still does it. Hope...
  9. steved5600

    opinions needed! best wick material.. cotton, rayon, Japanese cotton

    To date organic cotton has been the best for me. Have not tried Japanese cotton yet and have cellucotton on order. In the future would help to have more info as we can ask you questions but you can't answer back. Knowing the atty's you use VG/PG ratios etc can help. I will probably post a...
  10. steved5600

    wicking issues

    You probably have the juice hole packed to tight with wick. I'm assuming cotton. With cotton less is more. Don't crowd the holes. If your using a Silica wick they do not do as well as cotton. If you want to move to cotton us organic or surgical cotton. Cellucotton is handy as it's got...
  11. steved5600

    What am I doing wrong?

    Joyetech download In this biz Googling is your friend. took me less than 5 min. Just type the name of the product and users manual or operating instructions and sometimes PDF.
  12. steved5600

    What am I doing wrong?

    Joyetech Joye eGo-C Upgrade Passthrough 650mAh here are some instructions. The solid white light says it's fully charged.
  13. steved5600

    What am I doing wrong?

    If you ran them down to dead it may be they are in safe or locked mode. It's been a while since i used an Joytech type mod but i think if you press the button like 5 times real quick it unlocks them. I know this because I thought i had a bad twist once and that was the problem They should put...
  14. steved5600

    Burning Question- Never Seen This Addressed- RE: Attaching Leads

    OK as long as the two posts leads do not touch that is OK. As long as the positive posts wires do not touch any other part of the ATTY that is OK. Mostly we trim off the leads as it will hang on the wick and can get bent and touch something during wicking maybe. I only wrap my wire about 1.5...
  15. steved5600

    Vaporizer for treating colitis. Any experience?

    We do NOT give out Medical advice here. Sorry it just opens up to much of a can of worms. As an Ex smoker I would say find another solution. But most of all you need to be asking your doctor about this. Hate to see a non smoker pick this up as a habit. There are other ways to get nicotine...
  16. steved5600

    Sharing my dry throat experience

    This sounds like a Medical Issue and we do NOT give out medical advise except to see a doctor. Will say to make sure you hydrate good when vaping. You may have had the smokers lung thing. If this reoccurs I woulds sure see a doctor. I had something similar but not that bad.
  17. steved5600

    Rda and flavor question

    In your case i doubt it will make much difference. I like drippers for two reasons if you get a good build i think it is better for two reasons you can change out cotton wick more often without dumping a tank if the wick gets clogged or burns for some reason. Also it's easier to change...
  18. steved5600

    Cleaning magnets and gold-plated contacts?

    Should not have to clean the magnet they have nothing to do with the electrical connection at least not in mine. Gold plated contacts should only be wiped with a cloth not paper towel and either soapy water or alcohol.
  19. steved5600

    Vamo v5 as first mod? what else do I need?

    I'd give the Sieg Zmax a good look. I have one and it's a good solid mod.
  20. steved5600

    Coil Wrap Problem

    That coil is a bit big. I calculate that a a 7mm dia. You may want to go with 2-2.5mm dual coils. Also when you pack the wick which i will assume is cotton don't cover the juice holes. Best build i have found has been a .5 ohm build with two duals 28ga 6 wraps. When you put the cotton in...
Top Bottom
Forums
Products
Vaping.com
Star Suppliers
Blogs
Menu