Search results

  1. steved5600

    sting ray clone magnetic switch

    Those are permanent magnets. You would really have to work to mess one up. I can tell were you can get a new one if you need it. IF the magnets appose each other they should be good. In that mod dirt on the magnet is not a big deal as it is not the contact it's recessed. On the off chance...
  2. steved5600

    Where to buy this new rayon?

    Amazon has rayon balls. Rayon is a really old fiber. Been around since early 1900s I think. Basically it cellulose.
  3. steved5600

    My rig is giving a burning smell but no burnt taste

    Probably some left over gunk in the chimney of the PT. Try running a Q-Tip swab down it. May have to dump the juice out into something and clean it. Hot soapy water will do or alcohol.
  4. steved5600

    Calculating Ohms Based on Number of Coils

    Oh wraps are affected by diameter of the coil and how tight they are the sure fire way to know is by length. In case you are new or somewhat new in rebuilding here is my speech on the matter Learn ohms laws, Use an ohm meter, use good batteries ( no battery with the fire in the name) and...
  5. steved5600

    Calculating Ohms Based on Number of Coils

    I'm sure there is but i'd use these. I trust these apps. Coil wrapping | Steam Engine | free vaping calculators https://play.google.com/store/apps/details?id=com.valsoft.vaperstoolbox&hl=en
  6. steved5600

    Show us your manly mod. The last one i did got closed and i got some new ones.

    I have those exact things. Love the TOBH easy to build.
  7. steved5600

    Ceramic Coils Info??

    i have those fat daddy doughnut coils. They are difficult to use. Can't touch anything as they get real hot. They heat up real slow to.
  8. steved5600

    Your first analog-free day/week and how to cope?

    You know I just heard this trick the other day. I can't test it but i bet it will work. I'm almost 2 year off analogs. If you get really crazy for an analog go chain vape for 15 min. You will lose your desire for the analog and the vape for a good long while. Should be able to use your...
  9. steved5600

    Need help battery/Mech Mod safety advice

    OK 1.1 and 1.2 is not sub ohm. assuming a fresh battery at 4.2 volts 1.1 ohms will give you 16 watts and 1.2 a bit over 14 watts and at 1.1 ohm your only pulling a bit under 4 amps. FYI if your a rebuilder you got to learn ohms laws, use an ohm meter and practice battery safety. Never...
  10. steved5600

    I'm so HAPPY! voltage/wattage for MVP 2.0 question

    I would not go over 16 watts. Iclears don't come subohm yet. Assuming a 1.5 ohm head that would be just under 5 volts. If you exceed that voltage i bet you will outrun that wick which on them is a top feed. If you had the 2.1 ohm head the voltage would be a little under 6 volts. But really...
  11. steved5600

    What are your favorite 26650 setups?

    My all copper hades with either a mega RDA or ToBH reda. I change juices alot so even though i have a foggerv4 28mm the RDAs get the most use.
  12. steved5600

    Problem with new nemisis

    TMCase is dead on I've ordered those upgrades before i even got the mod. Mine is an Hcigar. The only mechs i did not need to get fixes for were my hades mods.
  13. steved5600

    Recommended RBAs for beginner?

    I always recommend a dripper for the first Rebuildable. The one I would get would be the tobh. Easy to work with and holds a lot of juice. it has a deep well. But for the next step I'd get a fogger v4 or aqua. Work better than the kayfuns and i have all versions of them.
  14. steved5600

    why dont mech mods burn juices?

    Mechs will burn juice if you get the resistance low enough. If you have a sub ohm or low ohm coil with a fresh battery you can burn the juice if your wicking is not up to snuff.
  15. steved5600

    Tobacco java flavors

    Coffee and tobacco are not uncommon mixtures. Hell they mix all kinds of flavors with tobacco flavors. e-Liquid Calculator
  16. steved5600

    Getting into mech mods finally...

    Things mech users need to know and have. Learn OHMs laws. Have an ohm meter. Use a good smart charger. Don't scrimp on batteries that means not using any battery with the word fire in it. Do not let the battery get much below 3.4 volts or you will shorten the life of it. Use locking rings...
  17. steved5600

    Trying to be as safe as I can

    Oh never have the atty less resistance than the mod or the mod will heat up no matter how good the battery is. K100-101s are higher in resistance than say a brass or copper mod. Aluminum is a terrible conductor.
  18. steved5600

    Trying to be as safe as I can

    Things to remember about mech mods. Don't scrimp on batteries. Efest is in second place IME next to the 30amp sonys. You can put the battery in backwards but don't. Don't use a battery with the plastic damaged as it can cause a short and make the mod fire. Use the locking ring when not in...
  19. steved5600

    Cotton.

    I'm guessing the cotton is matted. With cotton less is more and if it gets to compressed it is not very good. may try fluffing it with your fingers. If when you pull the cotton though the coil it resists a lot then it's to dense.
  20. steved5600

    Please someone tell me: Is it possible to rebuild KangerTech E-Smart BCC?

    I have not found one video oh how to do it. Usually if it's possible someone has done a video. Looking at it I'd say not. You may want to move to a BDC like the aerotank. I use to use Protanks and moved to the dual coil BDC's like the PT3's an aerotank and Nautilus. The heads on the PT3s and...
Top Bottom
Forums
Products
Vaping.com
Star Suppliers
Blogs
Menu