Search results

  1. Wingsfan0310

    Evolv DNA250

    That's funny, I posted the exact same thing on another forum yesterday. Now looking at it again I noticed it also has reverse battery protection for mods using 18650's (26650's, etc) and a higher current fuse. Probably all good updates. The 250 watts doesn't matter to me since I don't use the...
  2. Wingsfan0310

    Lost Vape Therion DNA75 dual 18650

    If you use a 500ma charger, then that's all you will get to your mod. I don't think using 500ma vs 1 amp is really going to get you more charging cycles or less stress. The batteries are probably 2500-3000mah. Both 500ma or 1 amp are well under 1c. I think the only difference will be the 500ma...
  3. Wingsfan0310

    HCIGAR VT75 Nano

    I don't think it's dangerous to charge internally with a DNA chip. However if I'm forced to because of a bad cap design. That takes all of the advantage away of being able to easily swap batteries on the fly. For me with a single cell mod, that's a deal breaker. Cheers, Steve
  4. Wingsfan0310

    Lost Vape Therion DNA75 dual 18650

    Yeah, I read the same thing. A lot of stuff is going to be pushed out in the next 5 days to beat the FDA deadline (at least in limited quantities). Cheers, Steve
  5. Wingsfan0310

    Lost Vape Therion DNA75 dual 18650

    It doesn't matter if you use a 1, 2 or 2.4 amp charger. The board is a 1 amp charging board and that's all it will draw. The only exception is Vapor Shark who special ordered boards that will charge at 2 amps. Cheers, Steve
  6. Wingsfan0310

    Lost Vape Therion DNA75 dual 18650

    I have 5 Hcigar VT133's (DNA200) and have absolutely no issues changing batteries, No rips whatsoever of battery casings. It's easy to change batteries in that mod. Cheers, Steve
  7. Wingsfan0310

    Evolv DNA 75

    It sounds like what's happening is when you take the atty off and hit fire then screw it back on the atty hasn't completely cooled. So it's locking in a higher resistance (warm/hot). Then as it sits overnight, it's refining to the correct cold resistance. If you fire it and repeat the procedure...
  8. Wingsfan0310

    Evolv DNA 75

    Last I looked they still had the Black and Silver (a few days ago). The coupon code is: ecig10 Cheers, Steve
  9. Wingsfan0310

    Lost Vape Therion DNA75 dual 18650

    Manufacturers test 18650's down to 2.5v. Evolv has a hard cutoff ~2.7-2.8v so no matter what you set the soft cutoff at it won't go lower than that. Normally a 20 amp CDR 18650 would have a 35 amp pulse rating. This is just what I've seen from my batteries that are 20 amp CDR. To be totally...
  10. Wingsfan0310

    Lost Vape Therion DNA75 dual 18650

    From a safety standpoint, I don't see any problems with charging on-board. I have five DNA200 mods that use 3s Lipo packs and they are all charged internally. The board was designed to use 3s Lipos that would be charged internally. It has a very good balanced charging board. The DNA chip is the...
  11. Wingsfan0310

    Evolv DNA 75

    I've been using the 28ga SS430 for awhile now. I lightly torch the piece(s) I plan on coiling with a regular Bic lighter (barely get it to glow and move on down the wire). Just lightly and it takes the spring out. After that it's as easy to work with as any other wire. It's basically all I use...
  12. Wingsfan0310

    Limitless RDTA Plus!

    Whoever thought the new version was a good idea should be fired yesterday! Cheers, Steve
  13. Wingsfan0310

    Evolv DNA 75

    According to the DNA75 Datasheet, the max input current is 28 amps. I would use a 25R at the very least if it was me or one the batteries the other guys suggested. Even though the 25R is also rated at 20 amps, Samsung is known to be conservative with their ratings. It really depends on how hard...
  14. Wingsfan0310

    Lost Vape Therion DNA75 dual 18650

    On the Evolv DNA chips, Temp Protect isn't really a warning. It's the mod telling you that you've reached the temperature you have dialed up and the mod is varying power to keep you from exceeding it. You can change what shows up on the Theme Tab in Escribe (show message, show temp, don't show -...
  15. Wingsfan0310

    SXmini Q Class Powered by YiHi SX450 chip

    I wonder if they are going to get it in a mod by 8-8? If they don't it won't be of any use here. Cheers, Steve
  16. Wingsfan0310

    Lavabox M DNA 75

    It was going to be acrylic, which is plastic. I have 2 Lavabox DNA200 mods and don't have issues with scratches. Glass would have issues with breaking. I don't see any way glass would be a good idea. Cheers, Steve
  17. Wingsfan0310

    Evolv DNA 75

    Thank you my friend. I appreciate your quick response! :thumbs: :toast: Cheers, Steve
  18. Wingsfan0310

    Evolv DNA 75

    Is the Beta version a standalone installer or do you need the other one first and the Beta installs from that one? Cheers, Steve
  19. Wingsfan0310

    Lost Vape Therion DNA75 dual 18650

    I'd keep the one on the right :D :lol::thumbs: Cheers, Steve
  20. Wingsfan0310

    Lost Vape Therion DNA75 dual 18650

    Is the one on the left tan? The other two I think are Red. Am I correct? Cheers, Steve
Top Bottom
Forums
Products
Vaping.com
Star Suppliers
Blogs
Menu