Search results

  1. rogergendron1

    recomend me some start up base flavors

    I just got my first order in for diy juce 500Ml vg 125 ml 48 mg 50/50 base And a few flavors like French vinella Sweet cream Strawbery and cream Bannana and cream What i am looking to do is not really clone but recreate flavors like Mothers milk Milk and honey cosmic fog Moo juice mvv...
  2. rogergendron1

    i cant taste my unicorn milk !

    Everything was going just fine and I was sleeping a 30 mil bottle of six milligram unicorn milk from cut wood I swapped out to a point 3 ohm coil 24 gauge wrapped around a little screwdriver and then cut wicked it with Japanese cotton like I normally do. After loading up my dripper and letting...
  3. rogergendron1

    i cloud chase with 24mg nic !!!!

    Ha ha ha ha ha ... hhhmmmuuuuaaaaahhh ha ha !!!!! Solid copper smpl mod with little boy rda fireing a single 8 wrap 24g - .4 ohm micro coil ........ And yes ... loaded with 24mg nic GWAR Bloodbath Also ... Ss smpl with .5 ohm occ sub tank also with 24mg juice ...
  4. rogergendron1

    your opinion on the best rta out to date ......

    The paramiters i am looking for are not for me they are for my finance. .. It has to be a single coil based tank, no messing with dual coils she likes a single 26g macro/micro coil at .75 to 1 ohm ish It has to hold a days worth of constant moderate vaping ... i would say 5 mils It has to...
  5. rogergendron1

    the real differance between all vg ang 50/50 pluss e juice

    Yup i have been dripping since tea bag cartos and cisco spec attys were all you could get and tobaco juice taste like penut oil , i used yo make dripper attys from smok tech single coil cartos .... lol And from my experiance i can say this ... There are a lot of 100% vg juices or close to 100%...
  6. rogergendron1

    RDA solid copper magma ????

    Well i am looking online and i see what apears to be an all copper magma !! Base and all, It was in google imagas.... Now i cant tell , if its just painted/finished/anodized to apear all copper ... or if it realy is a solid copper through and through magma ... Can someone tell me if a solid...
  7. rogergendron1

    RDA glass tank for aeolus ???

    Well is there a copper version of the aeolus with a glass tank option or glass sleeve option I would love to have a copper on glass version if its possable
  8. rogergendron1

    RDA thoughts on the derringer rda ??

    I just ordered a smpl mod in copper with a brass switch and i am looking at the derringer rda in brass, my goal here is to have a rock solid low voltage drop hard hitting minimalistic mod for sub ohm vaping ... around .5-.8 ohm dual coil or single, but i want it as small as possable so it would...
  9. rogergendron1

    Highbrowvapors ry4.... Review...

    Ok so I have been vaping highbrows ry4 all day now and so far I do not like it,that mutch at all, it does have potential though, I can taste it and I know after steeping it should get a lot better. I just got a fresh bottle in the mail today So apon opening the bottle I get this overpowering...
  10. rogergendron1

    anyone else a scrapper / siver / gold horder or stacker ? coin roll hunters ???

    well if you are i would like to know some tip and tricks here and mabey share some of mine too LOL... what i do is scrap copper, aluminum, brass, bronze, iron, cast iron, steel, pc boards, mem chips, magnets and electric motors, then after i get the scrap and discard all the plastics and usless...
  11. rogergendron1

    pg better for cotton wicks than vg ???

    i like my HHV purity line of al vg juice ! man that stuff is good ! as is all VG juice but i have found that a bln of mostly pg seems to sink instantly right into a cotton wick ! its like the instant the pg hits the cotton it sucks it right in like wow ! but put a drop of vg on a brand new...
  12. rogergendron1

    AGI the permanant fix.....(no wire in spring ether) this is a real fix !!!!

    after doing a lot of work and posting a lot of pics i realized i put this in the wrong forum section LOL so here it is all you genny guys the REAL agi fix ... link to post in modding forum ... its a complete fix for the agi ... no more wire in the spring ! this is a real brasss rod fix...
  13. rogergendron1

    AGI the permanant fix.....(no wire in spring ether) this is a real fix !!!!

    ok this is not your typical "shove a wire in the spring fix for the AGI... this is a compete overhaul of the bottom base and positive center post and i will show you how to do it....the agi is only 10$ at 101vapes right now and this fix only cost 3$ so for 13$ you can have an amazing genny ...
  14. rogergendron1

    was going to order the patriot...... wound up with AGI instead.....

    yup i went on 101vapes to order the patriot clone and for lik 15$ AND WILE LOOKING I SAW THE AGI WAS ONLY 10$ wow !!! now the patriot is a dual coil dual air hole dripper thats 22mm and i realy want a 22mm dripper, but i do not dig the dual coil set ups, i was going to use it single coil. then...
  15. rogergendron1

    heathers heavanly vapes VS halo..........PG VS VG !!!

    just my :2c: here but this is just a comparison thread between the differantces i have found between 2 differant e juice vendors with 2 completely differant blends of juice. first off i love halo tribeca !!! its been my all day vape for a long time and it works great in tanks because of how...
  16. rogergendron1

    fogger help please !!! those of you who got this working right plz chime in !

    ok ok so i am not new to rba's by any means ! i can set up any rda with my eyes closed using an size or kind wire and any wick you choose ! and get it near perfect ! well knowing that you would think i could set up the fogger V3 right ? well here are the issues i have with the fogger...
  17. rogergendron1

    modding the magneto......(solid non teloscoping body hybrid!)

    well i had the smok natural and it was a great mod for its price, any way it got stolen in 18650 mode so i went and bought the magneto. i was looking at the magneto and thought to myself ... hhhhhmmmm this looks like the same threading ... so i went into my vape box and grabbed the natural...
  18. rogergendron1

    100% vg ... thick thick juice in a protank ??? well uni tank ...

    right now the only non rebuildable i use is a kanger unitank ... i just dont want to bring my rebuildables to work lol just some info i run a rebuilt 1 ohm 28g micro coil on a single 3 mm piece of silica for the wick. do you protank guys think 100% vg realy thick juice will wick fine with a...
  19. rogergendron1

    oddy terminator c VS oddy transformer c VS fogger.........

    alright guys i own a fogger and for the life of me i cant get it working right lol i cant fill it all the way without a massive flood ! it ether overflows or dry hits and i keep getting minor shorts at the positive post ! i know a lot of people rave about this but i have been at it for 3 days...
  20. rogergendron1

    i know people go high voltage but has anyone done low voltage ? 3v or lower ?

    what kind of coil will work best at low voltage say 2.5 to 3 volts ? a .5ohm micro seems like it will work even a simple .6ohm 3wrap could work right ? anyone try this ? the reason i ask is i have an abundant suply of cr123 batterys and want to use them up lol. does a single cr123 have the...
Top Bottom
Forums
Products
Vaping.com
Star Suppliers
Blogs
Menu