Search results

I'll try doing that. Thanks @93gc40

Hi, I've been using UD Bellus interchangably with UD Zephyrus V2 and the problem with the Bellus is that it ALWAYS, literally, every time, every coil, leaks. I've had issues with atomizer short, I got a suggestion that changing the oring might help and it did. I thought refilling issue will...

I did my homework. 30 W @ 0.5Ohm coil ~ 8amps of current. This isnt much for 3 batteries, is it? I don't neccesairly insist on using them. I use them only for a short time of HG2's charging, after they're charged I swap them out. Everything is cool, I just wanted to report that. Thanks again. :)

My RX200 was faulty. I got it replaced and now even those orange scavenged batteries work beautifully and last 2-3 days. LG HG2's last 3-4 days. Runinng 0.5ohm coil right now. I got 0.8v off the actual batteries voltage tops. It discharges properly now at least.

True, but those orange batteries work quite fine. The ones that leaked were Panasonic. Not IMR anyway I think. Yes, I had a battery leak, it didn't flood the Wismec, but still, it was visible that there's some sort of liquid with a bad smell. After that happened I cleaned it out with toilet...

Please do check my post here, I find it pretty pointless to just paste it over. Don't think that I'm just lazy, please. It's just that some of it could be useful here and some would be completely offtopic. If anybody would prefer me to paste it over here then please do tell me and I'll paste...

I am not sure what it was set to when it arrived, but I can tell for sure that after updating to 1.08 it automatically goes to 200W. Good thing I didn't have proper batteries the night I upgraded to 1.08 as I updated it and then rushed outside, I took a hit and it was weird, not like it usually...

Please do post a modding log here. I also had similar stuff with my rta. Stock coil of Zephyrus v2 works well, but after I built high resistance coil it was all a different story. It might not be my fault as it seems.

Uhm, but they ARE balanced perfectly on 3.6v. All of them. Not even 0.01 difference on multimeter between any. I'm really coming to think that some RX200 chips are better and some are worse, just like CPU's/GPU's. I've had the same stuff going on with other 18650's. I'd be happy with 0.1 or even...

Well, 0.1v variations are acceptable, but 0.3v or even 0.5v variations I had before are simply horrible. I genuinely had to swap batteries while they were still 3.8v...

3 of LG HG2's arrived just today, all brand new being at 3.6v. Works great, buuut Reuleaux RX200 STILL shows invalid voltage on the batteries. This I do not like. I'll make a video really soon, but for now I'll just type the voltage of HG2's reported by Wismec: 3.30 3.91 3.70 While actual...

3 of LG HG2's arrived just today, all brand new being at 3.6v. Works great, buuut Reuleaux RX200 STILL shows invalid voltage on the batteries. This I do not like. I'll make a video really soon, but for now I'll just type the voltage of HG2's reported by Wismec: 3.30 3.91 3.70 With 1st battery...

I love this forum and people in it!

These are not leaking. Previous Panasonic batteries were. Check them in my previous thread. I got rid of them now anyway. Thanks a lot for your answer and offer to help in-private. :) Those batteries were scavenged from the following laptop Pasteboard — Uploaded Image Woah, that sounds bad...

Well, I switched from Kayfun and Vamo/EGO V V3 Mega right to Wismec and Zephyrus in the matter of a week or two. All I need now is proper batteries. I'll borrow iJust2 battery from a friend of mine while waiting for HG2's to arrive. That should do the trick. TBH I'm not really into mechanic mods...

So I build 3 ohm (!) coil on the zephyrus v2 rda base and wismec says that device is too hot, while batteries temparature is normal (wismec front does heat up a bit), is this something I can go on with or should I go lower with the resistance? Pasteboard — Uploaded Image That's how it looks...

Thanks a lot man. I really appreciate it.

Would I be better off using wismec rx200 with 1.2ohm while having three of them inside (thats the only way for it to startup) or should I use one of them in the mech mod?

Okay, what shall I do then? For at least one day I'll have to use those batteries as I don't have any other. I also have this battery Ordered Wismec Reuleaux RX200, will my batteries be enough? But those started leaking. I do have one of them that seems fine. Would it be better to use panasonic...

Thanks a milion @zoiDman. This really helps. Even though I've been using this battery (not even fully charged, I think) for the last couple hours and it works well, it doesn't get even warm at all. That is a good sign isnt it? I can't tell you the exact battery voltage, as my multimeter broke...