Search results

I tried a menthol eliquid that I really like but can't find the flavour for dyi. Has anybody had a menthol flavouring that is red in colour? All the menthol flavours I've tried we're clear.

If you glue these on how are you going to get them off to clean your button? I have to take my button out all the time for cleaning

Hey guys just wondering how the derlin button covers attach to you button.

If you try 28g wire it will take longer to heat up and give ya an extra wrap or so. You can take that 5 or 6 sec draw that your use to because the coil takes a litter longer to heat up. And the extra wraps should produce a little more vapor

I would build a 2 ohm coil and work my way down. The hot juice is burning your mouth. A 1.5 ohm on a rm2 is way diffrent than a 1.5 carto in terms of vapor production. The same thing happened to me first when I got my reo so I bumped up the ohms for a while and slowly worked my way down to get...

The biggest diffrence I find is the diameter of the coil. Try changing your diameter of your coil, this also changes the number of wraps and the size of your wick changing the vape. Bigger coils you don't have to squonk as often more juice in the wick

I depends what you are using to vape with. Hardware is just as important as the juice you vape. It can always get better but usually it's gonna cost ya

I wouldn't bother with other rba's the rm2 is designed and tweaked with the bottom feeding Reo grand in mind. Most other rba's have got to be tweaked to make them work and the others could get expensive. Just get the rm2 and the Reo grand and you don't have to think about any other mods or attys.

Never thought of glue. Will try it

Hey guys do anyone know where I could find some sort of spring clamp. I want it small enough to fit the feed tube so I can clamp it to the juice feed nipple. What I find is I always pull off the tube every time I try to refill the bottle. Mine seams to slide off fairly easy

One black wrinkle/hammer tone grand with a RM2 lives in Newfoundland Canada

I don't understand why the divider was removed in the vv grand. But that's a good idea, I would probably try glueing a peice of plastic in there. I would actually like to see the divider go the full length of the inside of the reos to keep the juice bottle a litter tighter, I can feel the bottle...

I have a quick question. These fuses are designed to run on a 12 volt car but the battery's are running at about 3.7 volts does that make a diffrence. If you hook the battery up to a 10 amp house breaker that is designed to run at 110 volt will the battery be able to trip it.

There is a big question mark in my head now. Why would you want to do this. My motto is if it ain't broke don't try to fix it. It's to hot to vape with a full battery so why would you want to do this. Hope nothing happens but is can see this on the news as" guy blows hand off with e-cig" and the...

Welcome to reoville. The best service and support you will ever get from any supplier. Rob is the best. Oh yeah the guys on the forum are awesome too

basically what I find is the length of the wire. I use my multi meter and test the restance of the length of wire trim it to what restance I want then I can bend it to any diameter I want or any shape I want the restance stays the same as long as you don't change the length. I don't count wraps...

I also noticed on mine that the screws seem sloppy in the post. Like the post threads are a little bigger than the screws. Almost afraid every time I tighten it that they are gonna strip out. Can you get replacement post for the rm2 because I'm sure over time they will strip because it's brass...

If you have a sharpening stone you can make the screw shorter also drill the hole with a 1/32 bit,that will get the screw down some also. That should fix it all up. If not use smaller wire. With your wire being so thick the screw don't kink it and go down like it does with the thinner wire...

Not sure if that would work. No power getting to the tall screw if the coil isn't present.

Do you have a multi meter. Just check for a short before and after putting on the cap. I have the new rm2 also. Your screws look to be stuck up high. My screws almost bottom out. Actually the short post does bottom out and just barely holds the wire tight. You should always use a multi meter to...