Hi nelsonm64,
yes, the Silica is still available!
You can get it at eBay: Silica Rope 3 mm - Silica Wick - high quality - temperature resistance 1000°C | eBay
Or, if you prefer - you can order via PM.
Cheers, doolak
Hi, we have just 3mm wick - but as this is twisted very loose you can use it as 2-3mm wick.
And, you can easily split it into two strands of 1,5 mm - which you can use as 1-2mm wick.
So from 1-3mm it will fit all your needs.
Hi there,
here an overview about the Kanthal wires we have on stock at the moment:
Kanthal A-1 0.13 mm
Kanthal A-1 0.16 mm
Kanthal A-1 0.18 mm
Kanthal A-1 0.20 mm
Kanthal A-1 0.25 mm
Kanthal A 0.16 mm
Kanthal A 0.18 mm
Kanthal A 0.20 mm
Kanthal D 0.20 mm
Ribbon Kanthal D 0.4 x 0.1 mm...
Hi there,
sorry, did not see your message before...
Yes, we have No Res Silver wire in stock - you can order it via eBay here:
10 Metres No Resistance Silver Wire .9999 - 32 AWG - 0.20 mm / 0.008" diameter | eBay
Or just drop me a PM if you want to order it here through the forum.
Cheers...
I never used it for an ego-t, but as you can simply seperate the wick in its strands you can easily get exactly the diameter of wick which you need - so it should be perfect for using it in an ego-t or ego-c atomizer.
Cheers
Hi Icky,
yes - if you like you can order here through the Forum via PM. Just write me how much you want to order and provide me your shipping adress. I will sent you payment information then.
Cheers, doolak
Thank you very much for the nice feedbacks - I am very happy that you like the wick so much.
If there are any question feel free to ask - you are very welcome!
Thanks for the nice feedback, anavidfan!
I use a small butane torch, too. I just flame the wick with the torch for a moment - i don't boil it. But of course both is possible.
The main purpose for such a preprocessing is to clean the wick from the sizings (i am not sure if that's the correct...
We don't have any Kanthal A-1 AWG 34 at the moment - just AWG 32 and 33. But we have Kanthal A AWG 34 on stock.
If you want to order please let me know.
Cheers
Sent from my C64 using Tapatalk
Hello there,
from now on we have Stainless Steel Mesh #400 and #325 on stock.
It's a A4 sheet of woven stainless steel wire mesh with 400 holes per square inch (Mesh 400) or 325 holes per square inch (Mesh 325).
Product information Mesh #400:
- wire diameter: 0.030 mm (30 micron)
-...
I forgot to mention another point:
How do you measure the resistance? Do you just measure the resistance wire or do you hold the pins of the multimeter right and left on the no-resistance wire? I would suggest the second.
And, please take care that the no-resistance wire is twisted proper...
I have my Penelope since a few days and i have experienced something similar. When i checked the resistance with the Provari, sometimes it first shows the aimed 1.6 / 1.7, but then it jumped up to 2.5 or higher.
I think this results if the ground wire has a problem with the connection to the...
Hello there,
from now on we have No Resistance Silver Wire .9999 - 32 AWG - 0.20 mm / 0.008" on stock.
It's a Soft Fine Sliver wire (99,99%) - ideal for use as no resistance wire for the Odysseus, the Penelope or the Steam Machine.
Product information:
- resistance: 0.506 ohm/m (0.154...
Kanthal A-1 is still out of stock at the moment, we hopefully will get a new batch soon.
We still have Kanthal A in AWG 34 and AWG 33 and we added now Kanthal D in AWG 32:
Kanthal A 0.16 mm (AWG 34) on eBay
Kanthal A 0.18 mm (AWG 33) on eBay
Kanthal D 0.20 mm (AWG 32) on eBay
We had to...
Obviously it was - i did not expect to get such a big response to my Kanthal A-1 offer and so i was really really taken by surprise.
I thank you all for you orders and hope you will be satisfied with the wire and the wick! If anything is wrong, please tell me! And if everything is nice, feel...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.