120v Line voltage VV battery-less passthrough..... build?

[rebar]

Iv been searching for a good VV passthrough for the house. I don't understand why usb connectors/cables are always used since they typically don't supply the needed amperage and you end up using a 120v wall plug transformer anyway.

Does anyone make a decent battery-less VV or VW PV? Iv seen the VV 510/eGo passthrough from Vapor Kings but have read mixed reviews about the actual voltage under load and it's cable is only four feet long.

Or recommend a transformer and voltage regulator capable of any PV power requirement?

 

[Rader2146]

Pre-built and ready to vape....none that I have seen.

If you are capable of building your own, there are many options available. Most popular choice is probably the LM2596 DC-DC Regulator. Link in my sig for the PT that I built for on the road vaping.

For the house you could use a 12v/2a wall transformer and run that to a small box with the LM2596, switch, and 510 connector.

 

[rebar]

Pre-built and ready to vape....none that I have seen.

If you are capable of building your own, there are many options available. Most popular choice is probably the LM2596 DC-DC Regulator. Link in my sig for the PT that I built for on the road vaping.

For the house you could use a 12v/2a wall transformer and run that to a small box with the LM2596, switch, and 510 connector.

Thanks.. Iv got a power supply and LM2596, but still need the switch and 510 connector. Any suggestions for either?

 

[Rader2146]

Madvapes for the 510 connector

The switch depends on your style. You could mod the board a bit and use a tact switch for a small profile in a small box. A larger switch would just go inline and require a larger box. All depends on what you want. Choosing the form factor of the box is probably the first step.

 

[Slurp812]

He could even wire it up in a box mod kit from mad vapes, using the switch that is already there...

 

[Rader2146]

The board and switch wont fit in a 2xAA box together. He would have to use a tact switch to fit in that box.

 

[rebar]

The board and switch wont fit in a 2xAA box together. He would have to use a tact switch to fit in that box.

Iv decided to make a fake 14500 battery for my reo mini and supply that dummy battery with whatever voltage I want. So as soon as my LM2596 arrives, it wont take much to fire it up. What Im wondering is which atties or carto's I should try on the newly powered reo mini.

Then I start reading about the Nivel chip and SvoeMesto with Semovar and the ability of getting 5.5v from a 3.7 battery (how the hell do they do that) and setting a wattage and leaving it sounds nice. And now Im reading about people vaping close to 20 watts. What atty likes 20 watts? what a interesting rabbit hole Iv fallen down