2.3ml KANGER Horizontal Coil Cartomizers

[Bdbodger]

These are really good accept for the hard plastic whistle tip . The small hole builds up condensation around the hole so you think you getting juice in your mouth but it is the condensation . I tried a 901 drip tip but it is slightly too small to fit . It fits like a drip tip with no O ring on it so it falls out . Is there another drip tip that is a bit bigger that can be used ?

 

[Slim Batz]

Can you post a link pls....?

 

[Bdbodger]

Here is a link http://vaporgeek.com/index.php?route=product/product&path=86_114&product_id=271

 

[Slim Batz]

The site you linked ... he's got a number of different drip tips for non 510/901/808d ... maybe the vendor can advise you?

 

[rdwg]

Those look like echo-e cartos. if they are the same size then an 801 tip would fit. Thats what i use on my echo-e cartos and it really does help with condensation.

 

[Bdbodger]

The tip I had I had bought for the echo-e and it fit it so I though it was going to fit this but like I said it just fits but too loose to be of any use since it will fall out . Not sure what the size of the 801 is so if I remember I might order one on my next order but I am pretty well stocked up right now and small orders are not worth it for the shipping costs .

 

[Caridwen]

You probably need the ego mega drip tip then if the echo-e doesn't work. They fit the EMDCC so they should fit

Sort of like this

eGo MEGA Drip Tip

eGo Delrin Mega Drip Tips

 

[Angi2299]

Take off the whistle tip and flip it over. Try inserting a 510 drip tip in the hole. If it fits, slice the whistle part off, leaving enough of the bottom part to slide the 510 tip into. Insert drip tip into cut end of remaining cylinder. Insert into carto and vape.

 

[Bdbodger]

You probably need the ego mega drip tip then if the echo-e doesn't work. They fit the EMDCC so they should fit

Sort of like this

eGo MEGA Drip Tip

eGo Delrin Mega Drip Tips

ego mega type B is too large . Here are some pictures to show what it looks like . The last picture is the Kanger tip with the 901 which is the closest of the tips I have .

 

[Bdbodger]

Take off the whistle tip and flip it over. Try inserting a 510 drip tip in the hole. If it fits, slice the whistle part off, leaving enough of the bottom part to slide the 510 tip into. Insert drip tip into cut end of remaining cylinder. Insert into carto and vape.

Strangely enough that sort of works as far as the fit goes I don't know yet if I will get out the dremel and whack the whistle off yet or not , the plastic is hard plastic . Just wondering how the 801 compares to the 901 if it is slightly bigger that might work but if it isn't then I would be spending money for nothing .


EDIT: I found a temporary solution what I did was to cut the bottom off of a .6ml Kanger cartomizer condom about the length of the part of the 901 drip tip that you insert into the cartomizer . With that piece slightly off of the bottom so that I could get it started into the cartomizer before the drip tip I shoved the 901 drip tip into the cartomizer . It fits really tight now with just a bit of the condom showing . That may work for now until I find a better solution . Thanks all . I would still like to know about the size of the 801 though if anyone can help with that .

 

[richham3]

I have these cartos and an ego type A drip tip fits.

 

[Bdbodger]

I have these cartos and an ego type A drip tip fits.

I forgot to mention that one I did think of it for a second last night . Well I will add one to my next order I will check my fav vendors and see who has one . Do you enjoy the 2.3ml Kanger cartos ? I think they work great and I like the size . The EMDCC looks good on my provari at home but seems over sized for my egos that I take to work . The .6ml Kangers or boge cartos are good too just a bit small so you have to keep filling them but the 2.3ml Kanger is just the right size and looks good . A 2ohm single horizontal coil is what I want anyway I only bought the EMDCC for the capacity and I love them but they take a lot of battery juice to run .

 

[richham3]

I forgot to mention that one I did think of it for a second last night . Well I will add one to my next order I will check my fav vendors and see who has one . Do you enjoy the 2.3ml Kanger cartos ? I think they work great and I like the size . The EMDCC looks good on my provari at home but seems over sized for my egos that I take to work . The .6ml Kangers or boge cartos are good too just a bit small so you have to keep filling them but the 2.3ml Kanger is just the right size and looks good . A 2ohm single horizontal coil is what I want anyway I only bought the EMDCC for the capacity and I love them but they take a lot of battery juice to run .

I've been using one for a couple days and really like it. I'm not a fan of dual coils and had been using 1.7 or 2 ohm single coil prepunched cartos in tanks but the last batch of cartos I received now have 3 holes and flood after one fill with the juice I use. This carto replaces the tank for me.

 

[Bdbodger]

I got the ego mega atomizer type A drip tips and they work perfect . No more condensation around the small hole of the whistle tip now with a derlin drip tip I don't have to rotate the tip anymore , works so much better for me .