2 new Ego-T kits

[DLL9MM]

I had an eGo-t awhile back. Worked great. Most atomizers I ordered worked(some didn't)
I started buying mods and ditched the eGo-t
Then I missed the eGo-T and just ordered one from Liberty Flights for $40. Works alright. No major complaints.
Friday morning I ordered ANOTHER eGo-T kit from cignot. This time a type-B with LR atomizers and one 1000mah battery. Is the type B better? I am hoping the atomizers work. Should have it monday.
Does anyone here use the type-b LR tank setup without issues?

If the type B doesn't work out, what are the bigger cartos everyone is using on ego batteries? Where to buy?
I have Boge 2.0s already, but want something bigger with the cone shape like the echo.

 

[billo]

Yes, the B is better, in my opinion. The draw is easier than the A and , of course, it holds more liquid.

This has come up before on this forum and the B seems to always get the most votes.

I'm also using a type B LR from Cignot. It has no warranty, but so far it's lasted 5 months !

 

[Tom10]

I also like the Type B large tank, but I use SR atties. I've had no problems at all and think it's a top contender in the medium price range. If you want a larger carto, see:

eGo Mega Dual Coil Cartomizer Round Tip

 

[DLL9MM]

I also like the Type B large tank, but I use SR atties. I've had no problems at all and think it's a top contender in the medium price range. If you want a larger carto, see:

eGo Mega Dual Coil Cartomizer Round Tip

Thats the one. Thanks. I will order some in the future. Thanks
(Hopefully the type B works ok for me)
My type A kit is working pretty good. I have a knockoff battery I received awhile back. The tank atomizers work great on it. They work OK on the Joye ego-t batteries.

 

[DLL9MM]

Well I received my Ego-T type b kit with LR atomizers. I have been messing with one atomizer since I received the kit trying to get the awful taste out. I tried adjusting the wick over and over till I got it. Now it seems to be working fine(after 6 hours)
The second atomizer that I received actually works with no messing around with it. Strange.

 

[Tom10]

Well I received my Ego-T type b kit with LR atomizers. I have been messing with one atomizer since I received the kit trying to get the awful taste out. I tried adjusting the wick over and over till I got it. Now it seems to be working fine(after 6 hours)
The second atomizer that I received actually works with no messing around with it. Strange.

It's generally a good idea to leave the wicks alone. You can blow most of the primer out if you blow from both ends numerous times. Keep blowing until you get no primer out, do several dry burns of about 3 to 4 seconds each, and then drop a couple of drops of the ejuice you want to use directly on the wick. You should be ready to go then. It's unusual to fail in blowing the primer out, but if you do, wash the atty out with hot water, blow it out again, do several dry burns of about 3 to 4 seconds each, and repeat dropping a couple of drops of ejuice directly on the wick. I have 5 Ego-T atties that have been in use for months with no problems at all. I've never adjusted the wicks, removed the plate, or otherwise done any radical cleaning at all on my atties. Doing less is usually the best. Finally, you can also do a couple of draws without pushing the power button and start the wicking process.