Shawn are the 201's you have in stock the newer ones or the older ones? I am needing to order some and didnt ever see what was up with these, did you ever hear back from the factory on wether they had changed them or not?
201 Atomizer update?
- Thread starter riverrat45
- Start date
- th_trl_thread_readers 0
- Status
these are the newer ones, i used one for pretty much 2 weeks straight and never had a single issue with it. you just cant use any vg or vg pg blended liquids. they only seem to work very well with pg
Well crap, I just tried my "newer" 201 that I have in my Janty Stick v3 that I got today and wherever the air holes are they are totally blocked on the new v3 stick I can get no air flow whatsoever, where are the holes located on these anyway as they worked fine on my v2 stick?
Its the center hole, you can test it with your finger.
Does the V3 Have that cross cut in the connector?
Does the V3 Have that cross cut in the connector?
To solve a problem like this (I have a dse905, but I do not care for the 901 atty) I got an adapter from litecig (901 to 801) and filed/drilled a small hole in the side of it. You get air through the hole in the side of the adapter. Do this carefully or you may ruin the positive connection in the adapter.
One note, this works well with the new style m201 attys, but the older ones, not so much, sometimes a staple mod seems to make the contact work, sometimes the older atty style just refused to thread on at all.
One note, this works well with the new style m201 attys, but the older ones, not so much, sometimes a staple mod seems to make the contact work, sometimes the older atty style just refused to thread on at all.
Thats a bummer, because i'm liking the VG alot and i have the new 201 addies.. lol Well time to get a 510 if you ever get them back in.
- Status
